Larson Electronics Transformer - 500 VA - Converts 120V or 240V AC to 12V or 24V AC Outlets - (6) Receptacle Boxes

The Larson Electronics TX-500VA-6XAO-NR-MOD1O power transformer converts 120/240 VAC at 50/60hz to 12/24VAC and is ideal for powering 12/24 volt based lights and equipment. This unit comes with six, single-gang receptacle boxes for customer provided receptacles. The TX-500VA-6XAO-NR-MOD1 power distribution system from Larson Electronics is built to provide operators with a reliable source of low voltage 12 or 24 volt power while also providing the versatility of allowing operation of standard voltage equipment. This compact power distribution transformer is designed for portability and convenience as well as durability and includes an integral carrying handle, elevated base platform for protection from standing water, and weatherproof construction that withstands direct water spray and wetness when customer provided box covers are installed. The TX-500VA-6XAO-NR-MOD1 portable power distribution system provides 500 Watts and converts primary 120 VAC or 240 VAC electrical current into 12 or 24 VAC current. This means that this power distribution system can provide either 12-24 VDC or 12-24 VAC through its secondary output. The output side is equipped with six, single-gang receptacles boxes (covers not included) allowing operators to install their own covers and up to six receptacles.. This power transformer also incorporates an integrated adjustable voltage control which allows operators to increase the voltage levels fed to equipment from the unit to compensate for voltage drops that occur when very long length cords are used. Should operators experience drops in the intensity of illumination produced by lighting equipment because of the use of extra long cords for example, the operator can increase the voltage from 12 to 24 volts to compensate and maintain light intensity. For example, operators can use 12 volts for a 50 foot line, but can raise the voltage to 18 volts to push volatge down a 150 foot cord, so the light, for example, still receives the full 12 volts. Larson Electronics.com can build transformers to your specifications. If this model does not meet your needs, please contact us at 888-325-4448 [email protected]. Specifications / Additional Information TX-500VA-6XAO-NR-MOD1 Power Transformer Line In: 120V or 240V AC @50/60Hz Line Out: (6) Customer Provided Receptacles Transformer Watts: 500 Dimensions: 15”L x 10.25”W x 25.38"H Wiring: Input- 6` SOOW Cord w 5-15 Plug Mounting: Carrying Handle/Surface Mount Special Orders- Requirements Weight: 65lbs Contact us for special requirements Ratings: NEMA 3R Weatherproof Toll Free: 888-325-4448 E-mail: [email protected] *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase The Larson Electronics TX-500VA-6XAO-NR-MOD1O power transformer converts 120/240 VAC at 50/60hz to 12/24VAC and is ideal for powering 12/24 volt based lights and equipment. This unit comes with six, single-gang receptacle boxes for customer provided receptacles. The TX-500VA-6XAO-NR-MOD1 power distribution system from Larson Electronics is built to provide operators with a reliable source of low voltage 12 or 24 volt power while also providing the versatility of allowing operation of standard voltage equipment. This compact power distribution transformer is designed for portability and convenience as well as durability and includes an integral carrying handle, elevated base platform for protection from standing water, and weatherproof construction that withstands direct water spray and wetness when customer provided box covers are installed. The TX-500VA-6XAO-NR-MOD1 portable power distribution system provides 500 Watts and converts primary 120 VAC or 240 VAC electrical current into 12 or 24 VAC current. This means that this power distribution system can provide either 12-24 VDC or 12-24 VAC through its secondary output. The output side is equipped with six, single-gang receptacles boxes (covers not included) allowing operators to install their own covers and up to six receptacles.. This power transformer also incorporates an integrated adjustable voltage control which allows operators to increase the voltage levels fed to equipment from the unit to compensate for voltage drops that occur when very long length cords are used. Should operators experience drops in the intensity of illumination produced by lighting equipment because of the use of extra long cords for example, the operator can increase the voltage from 12 to 24 volts to compensate and maintain light intensity. For example, operators can use 12 volts for a 50 foot line, but can raise the voltage to 18 volts to push volatge down a 150 foot cord, so the light, for example, still receives the full 12 volts. Larson Electronics.com can build transformers to your specifications. If this model does not meet your needs, please contact us at 888-325-4448 [email protected]. Specifications / Additional Information TX-500VA-6XAO-NR-MOD1 Power Transformer Line In: 120V or 240V AC @50/60Hz Line Out: (6) Customer Provided Receptacles Transformer Watts: 500 Dimensions: 15”L x 10.25”W x 25.38"H Wiring: Input- 6` SOOW Cord w 5-15 Plug Mounting: Carrying Handle/Surface Mount Special Orders- Requirements Weight: 65lbs Contact us for special requirements Ratings: NEMA 3R Weatherproof Toll Free: 888-325-4448 E-mail: [email protected] *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase