Larson Electronics 25 Watt Magnetic LED Light - 250W Metal Halide Equivalent - 12 2-Watt High Output LEDs - LEDWP-250

Made in the USA The LEDWP-250-M LED Blasting Light offers high light output from a compact form factor and is designed to provide a more durable and long lived alternative to halogen units. This LED light includes a 200lb grip magnetic base which allows the unit to be mounted to metallic surfaces such as walls or work tables. This 25 watt LED light produces illumination comparable to a 250 watt metal halide unit without the high heat, fragile construction, or higher energy costs of incandescent lighting. This unit can be powered directly from a 120 volt AC source and includes a 10` SOOW cord terminated in an industrial grade cord cap. The LEDWP-250-M LED blasting light from Larson Electronics produces a long flood beam of light while drawing only 25 watts @.21 amps at 120 VAC. The light assembly consists of twelve 2.08 watt LEDs paired with high purity specular optics to produce light output comparable to that of a 250 watt metal halide. This LED blasting light is designed to withstand demanding conditions and is IP68 rated, waterproof, vapor proof, and built to resist the damaging effects of an outdoor environment. The LEDWP-250-M consists of twelve, 2.08 watt LEDs housed within a waterproof aluminum housing that is powder coated for added durability and resistance to corrosion. The housing incorporates integral cooling fins for efficient heat dissipation and increased LED longevity. The LED lamp assembly is protected by a shatterproof polycarbonate lens which is secured to the housing with a waterproof seal. A 1/2" waterproof connector provides a secure and sealed power connection point and rounds out this unit`s weather resistant construction. The LEDWP-250-M blasting light from Larson Electronics produces a light beam that is longer and narrower than a standard Rab Floodzilla 250W Metal Halide. The beam will illuminate an area nearly twice the distance as a standard 250W metal halide flood light, but is 30% narrower than the metal halide flood. Mounting hardware for the LEDWP-250-M consists of a stainless steel black coated bracket that allows vertical adjustability and a 200lbs grip magnetic base. The magnetic base will hold this LED light securely in place even if mounted on walls or overhead, and is strong enough to withstand the vibrations of running equipment. This unit is designed to operate with voltages ranging from 110 VAC to 270 VAC, providing versatile power connection options and the ability to run the unit with commonly encountered 120-220 VAC voltages. The LEDWP-250-M provides an efficient and highly durable alternative to standard metal halide and halogen blasting lights that produces a longer reaching beam while using only a fraction the power. Click Photos to Enlarge 5-15 Straight Blade Plug15 Amp / 125V Rated L5-15 Twist Lock Plug15 Amp / 125V Rated L6-15 Twist Lock Plug15 Amp / 250V Rated UK BS1363 Straight Blade Plug13 Amp / 250V Rated / Internal Fuse Intl Schuko 2-Pin Plug16 Amp / 250V Rated / Grounded Flying Leads / Pigtail Wires Wiring and Plug: This vehicle mounted LED flood lighting system is equipped with 10 foot of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, standard 6-15 15 amp straight blade plug for 220-240V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug. This LED blasting light comes with a three pack of mylar film lense protectors rated to 500 degrees F with adhesive backing. Thmylar covers protect the LED blasting light against small stones, sand, and other abrasive scratching elements. The user simply peels and sticks them to the lens, providing easy protection and reduced lens scratching and scuffing. With the LEDWP-250-M there is no warm up period, the light can be cycled on and off without any reduction in lamp life, there is no glass or filament to shatter or break, and the solid state LED design provides 50,000 hours of operation. The LEDWP-250-M is ideal for sand blasting, water blasting, wall pack lighting, wall pack down lighting, upwards lighting, monuments, marinas, docks, warehouses, billboards, parking lots, and security systems just to name a few examples. Specifications / Additional Information LEDWP-250-M Wall Pack Light LEDWP-250-M Features Lamp Type: LED Waterproof/Vapor Proof Dimensions: W-8 1/2" D-3 1/8" H-6 3/8" Operates on Standard 110-270 VAC Weight: 7 lbs Impact/Vibration Resistant Construction Voltage: 110~277 Volts AC 50,000 Hour LED Life Watts: 25W ETL Approved for Wet Locations Lumens: 2000 IP68 Waterproof Luminous Efficacy: 80 Lm/W Lamp Life: 50,000+ Hours Color Temp: 5000K Color Rendering Index: 80 CRI Lighting Configuration: Flood Power Efficiency: >95% Power Factor: 0.992 Amperage: 0.21A @ 120V, 0.11A @ 240V, 0.1 @ 277V Ambient Operating Temp Range:-50¡ C to +65¡C Lamp Housing Material: Aluminum Lamp Mounting Bracket Material: Stainless Steel Lens Material: Polycarbonate Special Orders- Requirements Mounting: 200lb. Grip Magnetic Mount w/ Adjustable Bracket Contact us for special requirements Wiring: 10` 16/3 SOOW w/ Cord Cap Toll Free: 1-800-369-6671 Cord Cap: 5-15, 6-15, L5-15, L6-15, BS1363, Schuko, or Pigtail Warranty: Yes - 3 Years E-mail:[email protected] 3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement. Scroll Down to Purchase-