Larson Electronics 2.5KVA Mobile Power Distribution Center - 120 Volt Stepped Up to 240V - 6-50R Outlet

Made in the USA The Larson Electronics MPD-120.1P-2.5KVA-240.1P-50A Mobile Power Transformer System steps up 120V AC electrical current to 240V AC 60hz. This power distribution system provides operators the ability to safely tap into commonly found 120V AC power from a variety of sources including generators and direct grid power. This portable spiderbox is suitable for outdoor applications. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* The MPD-120.1P-2.5KVA-240.1P-50A temporary power distribution system provides a safe and reliable way for operators in industrial settings to tap into and utilize power sources independently of the work area. This unit provides an effective power distribution system for operators performing plant turnarounds, maintenance and cleaning in work areas, equipment installations and repairs, and any activities requiring an alternative to native power sources. This portable transformer is designed to operate with 120V 60hz which it then steps up to 240 VAC. The power distribution system on this portable substation makes 240VAC available via one 50A, 240V 6-50R receptacle. Operation: 20` of 12/3 SOOW line-in power cord terminated in a 5-15P cord cap is included to connect the transformer to a primary 120V primary power supply. A 20-amp 120V single pole switch protects the 2.5KVA 120/240V NEMA 3R transformer. On the secondary side, a 15-amp 240V two pole breaker protect the 20` of 12/3 SOOW cable terminated in a 6-50R secondary receptacle. The transformer is connected to a 1/8” thick diamond plate and the distribution assembly is mounted onto a rugged 2 inch square carbon steel frame with a top located lifting eyelet to allow easy transport. This temporary power distribution solution can be modified to meet the needs of job-site receptacle requirements. Units are available up to 150kva and can be equipped with skids or trailer mounted. Applications: This power distribution system is NEMA 3R rated and ideal for indoor/outdoor use and applications including but not limited to; construction sites, plant maintenance, plant turnarounds, hazardous location operations, shows, exhibits, and shipyard operations. Larson Electronics is a manufacturer and as such can build portable transformer systems to your specifications. Although we carry several models of power distribution systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MPD-120.1P-2.5KVA-240.1P-50A Mobile Distribution Center Ratings: Line In: 20` 12/3 SOOW Cord UL 1640 Portable Power-Distribution Equipment Line In Cord Cap: 5-15P NEMA 3R Indoor or Outdoor Use Primary Voltage: 120V AC 60Hz Made in the USA Primary Protection: 120V 20A Disconnect Switch Transformer: 2.5KVA 120/240V N3R Secondary Voltage: 240V AC 60Hz Secondary Protection: 15A 240V 2-Pole Breaker Line Out: 20` 12/3 SOOW Cord Special Orders- Requirements Line Out Receptacle: 6-50R Contact us for special requirements Form Factor: Powder Coated Steel Dolly Cart w/ Locking Casters Toll Free: 888-325-4448 Dimensions: 24"-L x 24"-W X 24"-H Weight: 185lbs E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase