Larson Electronics 1920W LED Light Tower Trailer - Diesel Genset - Electric Mast - Extends up to 30' - 240,000 Lumens

Made in the USA The Larson Electronics WCDE-11-30-3S-4X500W-LED-EW-TLR trailer mounted fold over light mast provides a safe and effective way for operators to quickly deploy 1,920 watts of intense LED lighting to elevations up to thirty feet. Four 1000 watt metal halide equivalent high output 480W LED lights powered by a Kubota water cooled diesel engine turning a single bearing 4 pole generator which produces 120/240V@60Hz to produce a wide spread of intense white light, allowing this unit to effectively cover large work areas with high quality illumination. This light tower folds over for easy transportation, features a rotating boom that allows for 360¡ of rotation, and a removable mast head for storing mounted equipment when not in use. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS* The WCDE-11-30-3S-4X500W-LED-EW-TLR trailer mouned 1,920 watt telescoping steel light mast with 1000 watt metal halide equivalent LED light heads from Larson Electronics is designed to quickly and safely deploy 1,920 watts of intense LED lighting in locations where elevated illumination is needed for maximum area coverage. This light boom can be extended to twenty-five feet for maximum area coverage and collapsed to twelve feet for applications where a footprint smaller is required. The tower is constructed of square steel tubing with a lower section 12` in length and 4" by 4" by 1/8" thick, middle section 11` in length and 3" by 3" by 1/8" thick, and an upper section 10` and 2" by 2" by 1/8" thick. Each section has a 1` overlap. The mast is elevated using an included 1,000 lbs electric winch with 3/16" galvanized steel cable and extended to its full height using a second 1,000 lbs electric winch. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Lights: The lighting system on this articulating light mast is comprised of four our of GAU-LTL-500W-LED 480 watt LED lamps producing 60,000 lumens of light each attached to the end of the telescoping pneumatic light boom. These floodlights produce a wide flood light pattern with a combined total of 1,920 watts and 240,000 lumens of light. The GAU-LTL-500W-LED lights are ideal replacements for fragile and hot running 1000 watt metal halide lamps, offering increased durability, longer lamp life, and lower power consumption. The entire lighting assembly is connected to the power source via a 4-switch control box. Each light head is on an individual circuit and can be powered on or off independently of the other light fixtures. Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units feature individual heat sinks per bank of six LEDs to control heat buildup rather than utilizing a single housing to dissipate heat. This allows for more thorough cooling of the LEDs for extended operating periods. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 80,000 hours. In addition, should an LED failure occur, these LED flood lights are field serviceable. Each bank of six LEDs can be replaced with the fixture installed. This allows for the tower to stay in operation until repairs can take place, and eliminates the need to remove and disassemble the entire fixture for repairs. Durability: As well as unparalleled heat control, the GAU-LTL-500W-LED series of LED lights from Larson Electronics also offer IP67 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40¡ Celsius to +80¡ Celsius, are waterproof, and resist ingress of dust, dirt and humidity. The housings are formed from die cast aluminum and the optics are high transmission PMMA with 98% light transmittance. The Cree¨ LEDs help these units achieve resistance to vibrations and are rated at 70% lumen maintenance after 80,000 hours of use. We use these LED lights for applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered. The above image shows the comparison of the traditional 4000 watt metal halide light plant such as our LM-25-3S-4X1000W (left) to the WCDE-11-30-3S-4X500W-LED-EW-TLR LED light tower. The area being illuminated by each tower is 300` in length and 250` in width. Unlike the metal halide light plant, there are no hot spots with the LED plant. This high output LED light plant provides an even beam spread over the targeted work area without overcast, glare, light spillage, and wasted illumination. Color rendering is also increased with LED light plants, providing a more realistic night vision that more closely resembles natural daylight illumination. Each floodlight is securely fastened to the mast head with an innovative trunnion style stainless steel mounting bracket that allows the light to be adjusted through 180¡ of vertical movement. The LED light head is secured to the mounting bracket with shock dampening rotating inserts. The insert provides precision aiming down to 1¡ while providing increased longevity to the LED fixture. To vertically adjust the unit after mounting, the user simply loosens the screws located on either side of the unit, moves it into the desired position, then re-tightens the screws. The base of the mounting trunnion is equipped with several machined slots which allow users to utilize existing mounting holes and slide the unit for precise mount positioning. Retractable outriggers with 1,000 lb manual crank jacks and tail lights. Electric 1,000 lb winch for elevating and folding over the light mast on the WCDE-11-30-3S-4X500W-LED-EW-TLR. Mast support bracket for securing the mast boom in the fold-over position during transportation. Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Ready to Ship Click Image to Enlarge The LM family of telescoping towers feature a proprietary mast guidance system, which provide increased stability during high winds. When lowered to 14 feet, the mast can withstand winds up to 125 mph. When elevated to its full upright position, the mast can be rotated a full 360¡. By loosening the T-Handle, operators can rotate the mast with easy in either direction. The mast can be positioned in one of four different directions, and locked back in place by re-tightening the T-handle. The mast itself spins freely with easy, and can typically be rotated with a single hand. The LM series of towers are powder coated with glossy blue finish for corrosion resistances and aesthetics. This light mast is mounted to a 14` by 6`, single axle trailer via six 1/2" anchor bolts. The two wheel trailer is equipped with 3,5000 lbs leaf springs and 15" trailer tires. The trailer can support and haul an additional 2,000 lbs of equipment. A standard 2" ball coupling, two standard safety chains, and 4-pin flat trailer plug allow for easy hookup and towing. Genset: The WCDE-11-30-3S-4X500W-LED-EW-TLR mobile light tower includes a Kubota Lowboy II GL11000TM genset that houses a Kubota D722 diesel engine that powers the 11KW 120/240V brushless generator. This genset is liquid cooled and features a single phase generator with electric start ignition. The diesel generator runs at 3600 RPM and is equipped with an EPA/CARB Tier 4 emissions system. A 50 gallon fuel cell sits beside the genset and is equipped with an electric fuel delivery system. The fuel cell is constructed of single a heavy gauge steel single wall frame with internal anti-splash baffles. This genset features key operated electric starting, a twelve volt electrical system, liquid cooling, replaceable dry element air cleaner, and a full enclosure for safe operation and protection against the elements. This engine also features cold weather options to improve performance under cold weather conditions. Voltage: The drivers in this unit`s LED light heads provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These light towers can operate on current ranging from 90 to 305V AC or 127 to 431V DC without any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in electrical systems which would otherwise result in burning up or premature LED failure without it. Suggested Applications: With its easy deployment the WCDE-11-30-3S-4X500W-LED-EW-TLR is ideal for use in applications that require regular intensive cleaning and are exposed to a lot of vibration, dust, dirt, where abusive working conditions are encountered, temporary lighting, and construction sites. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or message [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information WCDE-11-30-3S-4X500W-LED-EW-TLR Trailer Mounted LED Light Plant Mast Summary Lamp Type:Cree¨ LED 14 to 30 Foot Light Mast Lamps: (4) 480 Watt LED Fixtures Steel Construction Total Watts: 1,920 (480W per lamp) Powder Coated Finish Total Lumens: 240,000 (60,000 per lamp) Removable Mast Head Luminous Efficiency: 125 lm/w 125 mph Wind Resistance LED Life Expectancy: 80,000 hours Electric Operation Optics Efficiency: 98% - PMMA High Transmittance Optics 50 Gallon Fuel Cell Led Drive %: 90% LED Lamp Head Summary Lighting Configuration: Flood Pattern High Output LED Lamps Color Temp: 6000K Extreme Area Coverage Ambient Temp Rating: -40¡C to +80¡C Direct Replacement for (4) 1000W MH Towers Power Factor: >97% 2,000W LED compared to 4000W MH Lamp Voltage: Universal 120-277V AC 50/60 Hz 240,000 Total Lumen Output Lamp Control: Individual Switches per Light Head Independently Adjustable Light Heads Independently Switched Light Heads Mast Length: 14 feet - 30 feet Dial-in Adjustability per light head Weight: ~600 lbs 98% Transmission High Purity PMMA Optics Materials: Steel Multiple LED Banks for Heat Dispersion Finish: Powder Coated - Gloss Blue 125 Lumens Per Watt Efficiency Voltage: Universal 100-277 VAC, 50/60Hz 70% Lumen Retention after 80,000 Hours Operation: (2) 1,000lbs Electric Winches IP67 Waterproof LED Fixtures Cable: 3/16 Aircraft Grade Galvanized Steel Cable Mounting: 1/4" thick, 13"x15" Six Bolt Hole Bracket Trailer Summary Genset: 11KW Kubota Brushless Genset 14` x 6` Trailer Bed 15" Trailer Tires Trailer Specs (4) 1,000lb Retractable Outriggers Materials: Steel 3,500 lb Suspension Trailer Dimensions: 14-L` x 6`-W trailer bed Hitch: 2" Ball Coupler Wiring: 7-Pin Flat Axle: 3,500lb Suspension: 3,500 Lb 4-Leaf Double Eye Springs Outriggers: (4) 1,000 Manual Crack Leveling Jacks - Retractable Wheels: (2) 15" 5x4.5 Steel Rims Special Orders- Requirements Tires: ST205/75/D15 H188 Contact us for special requirements Shipping Weight: ~1600 lbs Toll Free: 1-800-369-6671 Shipping: Common Freight Fax: 1-903-498-3364 Options: Length- Mounting-Fixtures/ Call Us for Special Requirements E-mail: [email protected] 3 year warranty replacement on this light mast. The customer ships the failed light mast to Larson Electronics at their expense. If the failure is a manufacturer defect, we will repair and/or replace the unit. Scroll Down to Purchase-