Larson Electronics 16' 2-Stage Light Mast on 10' Trailer - 2x 90 Watt LED Lights - 21kW Diesel Genset - Extends to 16ft

Made in the USA The Larson Electronics WCDE-21KW-16.9-2S-2XWP90-TLR10 self contained trailer mounted fold over 2-stage light mast with provides a safe and effective way for operators to quickly deploy the two equipped 90 watt LED light fixtures to elevations up to sixteen feet. The light tower folds over for easy transportation, features a rotating boom that allows for 360¡ of rotation, and a removable mast head for storing mounted equipment when not in use. This self contained light plant is equipped with a water cooled 21kW Kubota diesel generator to provide power to job site equipment. The entire assembly is mounted onto a 10` single axle trailer, allowing operators to transport this fold over boom from location to location. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS* This telescoping two stage steel light mast from Larson Electronics’ is designed to allow operators to quickly and safely deploy lighting, cameras, and other electrical equipment in locations where this equipment must be elevated to heights up to 16` for effective coverage. This light boom can be extended to 16` above the trailer floor for maximum area coverage, and collapsed to 9` for applications where a footprint smaller is required. The tower is constructed of square steel tubing with a lower section 8.25` in length and 3" by 3" by 1/8" thick and an upper section 9` in length and 2" by 2" by 1/8" thick. Each section has 1` foot of overlap. The mast is elevated using an included 1,000lb rated hand winch with 3/16" galvanized steel cable and extended to its full height using a second 1,000 lbs winch. The mast is mounted at the front of a 10` trailer and the mast head hangs over the back of the trailer. 44" Mast Head for mounting lights and equipment 13" by 15" by 1/4" thick mounting base Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge The WCDE-21KW-16.9-2S-2XWP90-TLR10 is equipped with two of our LEDWP-900 90 Watt LED high output LED flood lights. Each light head consists of thirty three-watt LEDs housed within a waterproof aluminum housing that is powder coated for added durability and resistance to corrosion. The housing incorporates integral cooling fins for efficient heat dissipation and increased LED longevity. The LED lamp assembly is protected by a shatterproof polycarbonate lens which is secured to the housing with a waterproof seal. A 1/2" waterproof connector provides a secure and sealed power connection point and rounds out this unit`s weather resistant construction. Mounting hardware for the LEDWP-900 consists of a stainless steel coated bracket and stainless steel screws to provide secure mounting and resistance to rust and corrosion. The mounting assembly provides for 360/180 degrees of rotation and tilt to allow the user to position the unit. A 44" wide and 2" by 2" by 1/4" thick mounting plate is attached to the upper section of the mast which provides a strong and stable platform for the two LED light heads. When elevated to its full upright position, the mast can be rotated a full 360¡. By loosening the T-Handle, operators can rotate the mast with easy in either direction. The mast can be positioned in one of four different positions, and locked back in place by re-tightening the T-handle. The mast itself spins freely with easy, and can typically be rotated with a single hand. Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge The LM series of towers are powder coated with glossy blue finish for corrosion resistances and aesthetics. This light mast is mounted to a 4` by 6`, single axle trailer via six 1/2" anchor bolts. The two wheel trailer is equipped with 3,5000 lbs leaf springs and 15" trailer tires. The trailer can support and haul an additional 2,000 lbs of equipment. A standard 2" ball coupling, two standard safety chains, and 7-pin flat trailer plug allow for easy hookup and towing. The LM family of telescoping towers feature a proprietary mast guidance system, which provide increased stability during high winds. Four 1,000 lbs hand crank leveling jacks are used for leveling. The jacks can be leveled by hand crank or attachment provided for power drills. These outriggers can be extended 2` out from the side of the trailer for added stability. When lowered to 13.5`, the mast can withstand winds up to 125 mph. Custom builds can be provided for higher wind speed resistance when fully raised. Retractable outriggers with 1,000 lb manual crank jacks and tail lights. Manual 1,000 lb hand crank winch for elevating and folding over the light mast on the WCDE-21KW-16.9-2S-2XWP90-TLR10. Mast support bracket for securing the mast boom in the fold-over position during transportation. Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Ready to Ship Click Image to Enlarge Genset: The WCDE-21KW-16.9-2S-2XWP90-TLR10 mobile light tower includes a Kubota genset that houses a Kubota V2203 diesel engine that powers the 21KW 120/240V brushless generator. This genset is liquid cooled and features a single phase generator with electric start ignition. The diesel generator runs at 1800 RPM and is equipped with a 2" OD exhaust. A 50 gallon fuel cell sits beside the genset and is equipped with an electric fuel delivery system. The fuel cell is constructed of single a heavy gauge steel single wall frame with internal anti-splash baffles. This genset features key operated electric starting, a twelve volt electrical system, liquid cooling, replaceable dry element air cleaner, and a full enclosure for safe operation and protection against the elements. This engine also features cold weather options to improve performance under cold weather conditions. The entire tower assembly is shipped via common freight carrier or flatbed. Larson Electronics can custom tailor these units to the customer’s requirements with longer sections and larger mounting plates. For example, the LM-40-4S is another model that reaches to a length of 40`, with base section 11.25` in length, lower section 11.25` in length, an upper section 11.25` in length, and a top section 11.75` in length. Larson Electronics can custom build these towers to meet your overall and collapsed height requirements. We also offer a choice of either the manual or electric winches, finishing, and equipped light heads. Winch options include 1,000 lbs hand winches (included standard) or optional electric winches for standard light towers, and heavy duty winches and hoists for high payload units. Powder coating color can be customized (the standard mast is gloss blue). Mast location on the trailer bed can be tongue mounted, front of the trailer bed, or center of the trailer bed. These towers can be fitted with Larson Electronics line of high output light heads, or customize the mast head to meet the mounting requirements for your equipment. Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Suggested Applications: Temporary lighting, construction sites, and security camera deployment. We can equip this mast with 1000W HID-22-SL-REM or 1500W HID-22-15M-SL-REM Metal Halide lights or a wide variety of high powered LED lights with comparable power, including the LED10WSA-160, LED10WSA-320, LEDP5W-30, LEDP5W-60, and GAU-HB-160LED. Specifications / Additional Information WCDE-21KW-16.9-2S-2XWP90-TLR10 Trailer Mounted 3-Stage Light Tower Quick Summary Genset Specs: 21KW Kubota Brushless Genset Engine: Kubota V2203 50 Gallon External Fuel Cell Engine Type: Vertical, liquid-cooled, 4-cycle diesel engine Cold Weather Package Factory Installed Engine Speed: 1800 RPM 9` to 16` Light Mast No. of Cylinders: 4 Steel Construction Generator: 21KW 2-Pole Brushless Power Coated Finish Voltage: 120/240V Single Phase Removable Mast Head Max Load Amperage: 179A @ 120V / 89A @ 240V (4) 1,000lb Retractable Outriggers Max Continual Amperage: 171A @ 120V / 85A @ 240V 125 mph Wind Resistance Battery 12V 575 CCA Manual or Optional Electric Operation Fuel Cell Capacity: 50 Gallons - External Tank w/ Anti-Splash Baffles High Output LED Lamps Fuel Delivery: Electric Waterproof/Vapor Proof LED Lamps Sound Level: 69 dB - Full load @ 23` away 50,000+ Hour LED Lamp Life Cold Weather Package: Yes - Glow Plugs Factory Included Light Mast Specs Tower Length: 9` to 16` Mast Head Length: 44" Capacity: 150 lbs Materials: Steel Finish: Powder Coated - Gloss Blue Operation: (2) 1,000lbs Hand Winches, Electric Optional Cable: 3/16" Galvanized Aircraft Cable LED Light Specs: Lamp Type: LED Total Watts: 180 (90W per lamp) Total Lumens: 10,000 (5,000 per lamp) LED Color Temperature: Cool White - 6000K LED Life Expectancy: 50,000 hours Materials: Die Cast Aluminum Housing, Polycarbonate Lens Trailer Specs Materials: Steel Trailer Dimensions: 10`-L x 6`-W trailer bed Hitch: 2" Ball Coupler Wiring: 7-Pin Flat Axle: 3,500lb Suspension: 3,500 Lb 4-Leaf Double Eye Springs Outriggers: (4) 1,000 Manual Crack Leveling Jacks - Retractable Wheels: (2) 15" 5x4.5 Steel Rims Tires: ST205/75/D15 H188 Special Orders- Requirements Weight: +-500 lbs Contact us for special requirements Shipping: Common Freight Phone: 1-214-616-6180 Shipping Dimensions: ~12`-L x 9`-W x 6`-H Toll Free: 1-800-369-6671 Shipping Weight: +-3000 lbs Fax: 1-903-498-3364 Options: Length- Mounting-Fixtures/ Call Us for Special Requirements E-mail: [email protected] 3 year warranty replacement on this light mast. The customer ships the failed light mast to Larson Electronics at their expense. If the failure is a manufacturer defect, we will repair and/or replace the unit. Scroll Down to Purchase-