Larson Electronics 15KVA Temporary Power Distribution - 480 Volt - (2) 240V 30A & (8) 120v GFCI Outlets

Made in the USA The Larson Electronics MGL15-480-120-2X240.30-8X120.20 Temporary Power Distribution System converts 480 VAC current to single phase 120V AC and 240V AC 60hz. This power distribution system provides operators the ability to safely tap into and distribute 480VAC power from a variety of sources including generators and direct grid power. This portable substation is suitable for outdoor applications with a fully potted transformer and NEMA 3R load center. This unit features a built in cord wrap for customer provided cable and a top located eyelet for picking. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* The MGL15-480-120-2X240.30-8X120.20 temporary power distribution system provides a safe and reliable way for operators in industrial settings to tap into and utilize power sources independently of the work area. This unit provides an effective power distribution system for operators performing plant turnarounds, maintenance and cleaning in hazardous areas, equipment installations and repairs, and any activities requiring an alternative to native power sources. This portable transformer is designed to operate with 480v, three phase, 60hz which it then steps down to 1ph 120 VAC and 1ph 240 VAC. The power distribution system on this portable substation makes 120VAC available via eight 20-amp, 120v GFCI protected duplex 5-20 receptacles and 240VAC via two 30-amp, 30-amp L6-30R receptacles. All receptacle device boxes are industrial die cast malleable iron construction and feature rigid raceways between each device box. Description: Equipped with a 15KVA potted NEMA 3R transformer, this system takes 480V on the primary side and converts it to 120/240 single phase power. Operators can access this single phase power via eight 120 Volt, 20-amp 5-20R outlets with weatherproof covers and two 240 Volt, 30-amp L6-30R outlets. A cord wrap is built into the frame, allowing operators to store up to 200` of operator provided cable on this unit. 10-feet of 6/4 Type-W cable provides 480 Volt service. A 60-amp fusible disconnect protects the 15KVA potter transformer. The transformer feeds a 100-amp main circuit breaker panel that includes two 30-amp 240V breakers and eight 20-amp GFCI breakers. The breakers feed the L6-30R receptacles and six 5-20R outlets respectively. This wheeled unit sits on a powder coated steel frame with run-flat wheels. Operators tilt the unit back to maneuver the unit and place it upright to stabilize the system. Operators can lay the unit parallel to the ground and pass this power distribution system through a 24-inch square man-way. This power distribution system measures 23 inches square by 56 inches tall. The transformer and load center/distribution assembly is mounted to a standard steel cart style frame resulting in an extremely stable, durable, and mobile power distribution platform. Two rubber tires and a cart style mounting platform provides easier substation mobility, and a center point lift pickeye allows easy lifting with cable or chain hooks. This temporary power distribution solution can be modified to meet the needs of job-site receptacle requirements. Units are available up to 150 KVA and can be equipped with skids or trailer mounted. Applications: This power distribution system is UL 1640 and NEMA 3R rated and ideal for indoor/outdoor use and applications including but not limited to; construction sites, plant maintenance, plant turnarounds, hazardous location operations, shows, exhibits, and shipyard operations. These temporary power distribution systems are popularly used for industrial applications where external power sources are often necessary and work well in combination with explosion proof lights and equipment. Larson Electronics is a manufacturer and as such can build portable transformer systems to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MGL15-480-120-2X240.30-8X120.20 Temporary Power Distribution System Ratings Line In: 480V via 10’ 6/4 Type W UL 1640 Portable Power-Distribution Equipment Disconnect: 60A fused N3R disconnect NEMA 3R Indoor or Outdoor Use Primary Panel: N/A Made in the USA Transformer: 15KVA 480-120/240 1P N3R Secondary Panel: 100A MCB N3R Secondary Panel Breakers: 2 X 240V, 30A and 8 X 120V, 20A GFI Secondary Panel Outlets: 2 X L6-30R and 8 X 5-20 w/ covers Form Factor: Powder coated steel frame, dolly cart style, w/ 10" rubber wheels and top mount center pickeye Dimensions: 37"-W x 30"-D x 56"-H Special Orders- Requirements Weight: 275lbs Contact us for special requirements Features: Toll Free: 888-325-4448 Maximum Primary OCP: 20A @ 480V Maximum Secondary OCP: 62.5A @ 240V E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase