Larson Electronics *RENTAL* Temporary Power Distribution with 480 Volt Transformer and (8) 120v GFCI Outlets - 15 KVA

This unit is for rentals. The Larson Electronics RNT-MGL15-480-120-8X120.20 Temporary Power Distribution System converts 480 VAC current to single phase 120V AC and 240V AC 60hz. This power distribution system provides operators the ability to safely tap into and distribute 480VAC power from a variety of sources including generators and direct grid power. This portable substation is suitable for outdoor applications, with a fully potted transformer and NEMA 3R load center. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* The RNT-MGL15-480-120-8X120.20 temporary power distribution system provides a safe and reliable way for operators in industrial settings to tap into and utilize power sources independently of the work area. This unit provides an effective power distribution system for operators performing plant turnarounds, maintenance and cleaning in hazardous areas, equipment installations and repairs, and any activities requiring an alternative to native power sources. This portable transformer is designed to operate with 480v, three phase, 60hz which it then steps down to 1ph 120 VAC and 1ph 240 VAC. The power distribution system on this portable substation makes 120VAC available via eight 20-amp, 120v GFCI protected duplex 5-20 receptacles. Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge Description: The RNT-MGL15-480-120-8X120.20 portable power distribution substation converts 480 VAC electrical current to single phase 120V AC and 240V AC via a 15kva transformer (480v to 120/240v, 1ph, 60hz). A fused disconnect, main on/off switch provides primary line protection and supplies primary power to the 15KVA transformer. This power distribution system conforms to UL 1640. Secondary current is wired to a 120/240v, 1 phase, 125-amp load center with main breaker for circuit protection. 120/240 line out protection is provided by eight 20 amp, 125 Volt, 1 pole breakers. Connection for 120-240VAC is through 5-20 GFCI receptacles with weather proof covers. The load center is mounted within NEMA 3R enclosure. The transformer and load center/distribution assembly is mounted to a standard steel cart style frame resulting in an extremely stable, durable, and mobile power distribution platform. Two rubber tires and a cart style mounting platform provides easier substation mobility, and a center point lift eye allows easy lifting with cable or chain hooks. This temporary power distribution solution can be modified to meet the needs of job-site receptacle requirements. Units are available up to 150kva, and can be equipped with skids or trailer mounted. Applications: This power distribution system is UL 1640 and NEMA 3R rated and ideal for indoor/outdoor use and applications including but not limited to; construction sites, plant maintenance, plant turnarounds, hazardous location operations, shows, exhibits, and shipyard operations. These temporary power distribution systems are popularly used for HAZLOC applications where external power sources are often necessary and work well in combination with explosion proof lights and equipment. Larson Electronics` Larson Electronics is a manufacturer and as such can build portable transformer systems to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information RNT-MGL15-480-120-8X120.20 Temporary Power Distribution System Ratings/Approvals Line In: 480V via 25-foot $4 Type-W Cable w/ Blunt Cut End Made in the USA Primary Disconnect: 20-amp fused disconnect UL 1640 Transformer: 15 KVA 480 to 120/240 transformer - NEMA 3R NEMA 3R Secondary Panel: 125-amp main breaker, NEMA 3R panel Secondary Panel Breakers: (8) 20-amp breakers Secondary Panel Outlets: (8) 20A GFCI 5-20 outlets w/ weather-tight box & covers Form Factor: Powder coated steel frame, dolly cart style, with 8-inch rubber wheels Dimensions: 37"-W x 30"-D x 56"-H Weight: 300lbs Special Orders- Requirements Maximum Primary OCP: 18A @ 480V Contact us for special requirements Maximum Secondary OCP: 62A @ 240V Toll Free: 888-325-4448 Rental Type: Monthly, Weekly, Daily *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* E-mail: [email protected] Down to Rent