Larson Electronics 150W Explosion Proof LED Light - 5' Tall Base Stand Mount - 22" Stand - C1D1&2 - Inline Transformer

Made in Texas The EPL-24BS-5FT-1X150LED-240XLV-100 Explosion Proof LED Light from Larson Electronics is rated Class I Divisions 1-2 Groups C & D and Class II Divisions 1-2 and uses a 16 inch Cree LED light head to produce 21,000 lumens of light while drawing only 150 watts. The EPL-24BS-5FT-1X150LED-240XLV-100 features an encapsulated inline transformer to allow this light to be operated on 200-240V AC 50/60 Hz to 12V or 24V DC ***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** The EPL-24BS-5FT-1X150LED-240XLV-100 explosion proof LED light provides 10,000 square feet of work area coverage with 21,000 lumens of light output. This portable LED light is mounted to a 24 inch wide four leg aluminum base and has an LED light head measuring 16 inches wide by 14 inches tall. The LED light head on this unit produces a brilliant flood pattern of light that is ideal for illuminating enclosed areas and hazardous locations where flammable vapors, gases and dusts may be present. Often referred to as simply a "tank light," this unit is considered universal due to its ability to be passed through any conventional manhole such as those found in petrochemical containers and ship storage tanks. Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. This explosion proof LED light fixture is comprised of a 16 inch LED light head mounted atop a base stand fabricated from non sparking aluminum. Transferring the unit through manholes consists of simply removing the light head from the base, passing the light head and base through the manhole separately, and then reassembling the unit once inside. The lamp can be easily adjusted up or down 90 degrees and locked into position by simply loosening the two hand screws located on either side of the light head and re-tightening them once the desired angle is found. Included with this LED light cart is 100 feet of SOOW cord, which combined with the 360¡ of rotation and 90¡ of tilt offered by the LED light head provides an effective alternative to often cumbersome explosion proof string lights. The explosion proof LED light head in this unit features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twelve individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate. Voltage: The EPL-24BS-5FT-1X150LED-240XLV-100 features an inline transformer. The transformer allows the EPL-24BS-5FT-1X150LED-240XLV-100 to draw power from 200-240V AC, 50/60Hz current. The voltage is then stepped down to 12V or 24V DC to operate the light. Please make your output voltage selection below when ordering. ***Please note: The transformer is NOT explosion proof and must be placed OUTSIDE of the hazardous area.*** Click Photos to Enlarge 60¡ Beam Angle 125¡ Beam Angle 140¡ Beam Angle Beam Angles: When used as a portable lighting solution, the varying beam angles are each individually ideal for several environments. The 60¡ beam provides the most intense beam of the three options. It is perfect for narrow, confined spaces and is ideally suited for tank cleaning purposes. It offers focused light to provide ample illumination to tight work spaces and other environments. The 125¡ beam offers a more diffused source of light that is also less intense in brightness. It is a great general area work light and performs well when used for outdoor illumination. The 140¡ beam offers a very wide lighting pattern and is ideal for situations where lighting distance is not a concern, but illumination of a wider area and even light distribution is. The 140¡ beam is great for situations that call for working in close proximity to lights such as in a paint booth. Click Photos to Enlarge L6-15 Twist Lock Plug15 Amp / 250V Rated UK BS1363 Straight Blade Plug13 Amp / 250V Rated / Internal Fuse Intl Schuko 2-Pin Plug16 Amp / 250V Rated / Grounded Flying Leads / Pigtail Wires Wiring/Plug: This general use tank cleaning LED light fixture is equipped with 100` of 12/2 SOOW from the light fixture to the inline transformer and an additional 10 feet of 16/3 chemical and abrasion resistant SOOW cord from the transformer that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 6-15 15 amp straight blade plug for 220-240V wall outlets with ground, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug. Further adding to the versatility and convenience of this explosion proof LED light are 25 peel off mylar overspray lamp protectors that ship with the unit. The protectors provide lamp protection from dirt or debris and can be removed, cleaned and replaced, lessening the need for tedious lamp cleaning or replacements. This lamp is T5 temperature rated and the LED light head retains 80% of its lumen output after 60,000 hours of use, far longer than incandescent or fluorescent lamps. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information EPL-24BS-5FT-1X150LED-100 Explosion Proof LED Light Ratings/Approvals Listing: United States & Canada Class I Division 1, Groups C and D Lamp Type: Cree LED Class I Division 2, Group C,D Dimensions: 24"-W x 60"-H - 14` x 16` Light head Class II, Divisions 1 & 2, Groups E,F,G Total Watts: 150 watts Class III, Divisions 1 & 2 Lumens: 21,000 T5 Temperature Rating Voltage: 200-240V AC, 50/60Hz Stepped Down to 12V DC or 24V DC Certified to UL844 and C22.2 Standards Mounting: Aluminum Base Stand Paint Spray Booth Approved Weight: 30 Lbs Made in the USA Lighting Configuration: Flood Pattern IP67 Rated Waterproof Operating Temp Range: T5 Rated -40¡C to 65¡C Multiple Driver Banks Color Temp: 5600K, 5000K, 4500K, 4000K, 3500K, 3000K, 2700K, or 6500K 80% Lumen Retention after 60,000 Hours Color Rendering Index: >75 CRI LED Lamp Life Expectancy: 60,000 Hours Special Orders- Requirements Beam Angle: 60¡, 125¡, or 140¡ Contact us for special requirements Lighting Configuration: Flood Pattern Toll Free: 1-800-369-6671 Beam Lux: 8500@ 1 Meter 1250@ 3 Meters Intl: 1-214-616-6180 Wiring: 100` 12/2 SOOW from Light to Transformer, 10` 16/3 SOOW from Transformer to Gen. Area Cord Cap Fax: 1-903-498-3364 Cord Cap Options: 6-15 Straight, L6-15 Twist, UK BS1363, Intl. Schuko, Pigtail E-mail:[email protected]