Larson Electronics 150 Watt Explosion Proof Ultraviolet LED Light - C1D1 - 5' Tall Base Stand Mount - UVA - 22' Stand

Made in Texas The EPL-24BS-5FT-1X100LED-UVA-100 Explosion Proof Ultraviolet LED Light from Larson Electronics is rated Class I Division 1-2 Groups C & D and Class II Division 1-2. This portable UV light system incorporates a 16" LED light head to produce 46,550 mW of ultraviolet light in the 365NM while drawing only 150 watts. This portable fixture uses advanced LED light technology to produce ultraviolet A light and is T5 rated for hazardous locations where UV lamps are used in paint and adhesive curing, food inspection or for non-destructive testing. ***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** The EPL-24BS-5FT-1X100LED-UVA-100 explosion proof LED light provides 46,550 mW of ultraviolet light output. This portable LED light is mounted to a 24" wide four leg aluminum base and has an LED light head measuring 16" wide by 14" tall. The LED light head on this unit produces a brilliant flood pattern of UV-A light that is ideal for illuminating enclosed areas and hazardous locations where flammable vapors, gases and dusts may be present. This Class 1 Division 1 & 2, Class 2 Division 1 & 2 explosion proof UV light fixture provides 46,550 mW of high quality ultraviolet light while drawing only 150 watts. This high output UV LED fixture provides a 6,384 µW/cm2 center beam maximum intensity at 12" while providing a minimum 2,660 µW/cm2 intensity over a 14" by 14" area. The EPL-24BS-5FT-1X100LED-UVA-100 is typically used for curing coatings or adhesives and for non-destructive testing applications. This fixture has been thoroughly tested with the DuPont line of ultraviolet curable paints and primers, accelerating the cure times over metal halide fixtures with surface temperatures as low at 55¡F. Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge The explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twelve individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate. The EPL-HB-100LED-RT-UVA uses ultraviolet LED light technology, a technology that is far better in energy saving than traditional fluorescent bulbs used for the same purposes. Traditional ultraviolet lights require a coating to block out visible light or a special composition of gases and chemicals used to create a higher concentration of ultraviolet light. This process, however, also produces many other wavelengths of light which go unused and end up as wasted energy. LED lights are unique in that they have a narrower wavelength band than traditional ultraviolet sources and therefore do not require these special coatings. As a result, LED lights do not produce unused, wasted light and therefore consume less energy than traditional UV lights on the market. LED lights have the added benefit of being capable of producing very specific wavelengths with tighter curves and are more durable and light weight as well. This eliminates harmful UV-B and UV-C wavelengths from being emitted from the light source, adding in productivity and safety during operation. Energy Comparison 400W MH 100W LED Wattage 400 watts 100 watts Amp Draw @ 120V AC 3.34 amps 0.84 amps Amp Draw @ 24V DC 16.67 amps 4.17 amps Lamp Life Expectancy 15,000 50,000+ Hours Wavelength 320-400NM 350-380NM Operation Cost per Year (8hs/day @ 11c/kWh) $138.12 $32.12 Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting. Click Photos to Enlarge 5-15 Straight Blade Plug 5-20 Straight Blade Plug 6-20 Straight Blade Plug Wiring & Plug: The EPL-24BS-5FT-1X100LED-UVA-100 portable explosion proof ultraviolet light fixture is U.S. and Canada approved for use in paint spray booths. This fixture is equipped with 100` of 16/3 chemical and abrasion resistant SOOW cable terminated in an explosion proof cord cap. Plug options include explosion proof 5-15 15 amp straight blade plug, explosion proof 5-20 20 amp straight blade plug, or explosion proof 6-20 20 amp straight blade plug. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug. The Class 1 & 2, Division 1 & 2 LED ultraviolet light fixture can be used for non-destructive testing in aviation and manufacturing, food processing and inspection, and in paint, coating, and adhesive curing. The EPL-HB-100LED-RT-UVA provides operators in hazardous locations with a reliable and durable UV lighting solution that combines effective production of UV light with explosion proof protection and is applicable for leak detection, paint spray booths, ink, coatings, and adhesive curing, non-destructive testing, inspection, and food processing. This light is universal voltage capable and can be operated with 100-277 VAC, 50/60Hz. We also offer a low voltage version of this LED fixture that operates on AC/DC voltages from 11-25 Volts. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics. Click Photo to Enlarge This LED light produces 46,550 mW with a wavelength curve of 350-380NM. Further adding to the versatility and convenience of this explosion proof LED light are 25 peel off mylar overspray lamp protectors that ship with the unit. The protectors provide lamp protection from dirt or debris and can be removed, cleaned and replaced, lessening the need for tedious lamp cleaning or replacements. This lamp is T5 temperature rated and the LED light head retains 80% of its lumen output after 50,000 hours of use, far longer than incandescent or fluorescent lamps. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information EPL-24BS-5FT-1X100LED-UVA-100 Explosion Proof LED Light Quick Summary Listing: United States & Canada Class I Division 1, Groups C and D Lamp Type: LED Class I Division 2, Group A,B,C,D Dimensions: 24"-W x 60"-H - 14` x 16` Light head Class II, Divisions 1 & 2, Groups E,F,G Weight: 40 Lbs Class III, Divisions 1 & 2 Voltage: Universal Voltage 120-277V AC 50/60Hz T5 Temperature Rating Total Watts: 150W Certified to UL844 and C22.2 Standards Total Intensity: 46,550 mW Paint Spray Booth Approved Efficiency: 350 mW/w IP67 Rated Waterproof Light Color: Ultraviolet - UV-A Multiple Driver Banks Wavelength: 365NM Peak - 380-350NM Curve Lighting Configuration: Flood Pattern Special Orders- Requirements LED Lamp Life Expectancy: 50,000 Hours Contact us for special requirements Operating Temp Range: T5 Rated -40¡C to 65¡C Toll Free: 1-800-369-6671 Mounting: Aluminum Base Stand Intl: 1-214-616-6180 Wiring: 100` SOOW Cord Terminated w/ an Explosion Proof Straight Blade Plug Fax: 1-903-498-3364 Cord Cap: 5-15, 5-20, or 6-20 Straight Blade Plug E-mail:[email protected]