Larson Electronics 150KVA Power Substation - 480V to 208Y/120V 3PH - (4) 4100R12W Receptacles

Made in the USA The Larson Electronics MPD-480D-CMLK-150KVA-208.120-4X2P.100A heavy duty power transformer substation converts three-phase 480VAC electrical current into three-phase 208Y/120V. This unit provides operators the ability to safely tap into and distribute 480V power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Portable Power Distribution Purpose and UseThe MPD-480D-CMLK-150KVA-208.120-4X2P.100A temporary power distribution system gives operators the ability to power their 208 volt and 120 volt equipment from a single system. On the primary side, operators connect 480 volt line-in power using one set of male cam-lock inputs (brown, orange, yellow, green). On the secondary side, operators are provided access to four 4100R12W receptacles for 208Y/120V equipment. All receptacles are equipped with weatherproof covers. Operation: One set of 400-amp, 600V rated E1016 male cam-locks (brown, orange, yellow, green) brings 480V three-phase power into the primary panel, which is protected by a 200-amp, 480V three-phase time delay fuse block, and passes power to the transformer. The NEMA 3R 150KVA transformer converts 480V to 208Y/120V three phase and passes the current to the secondary panel. The secondary side of the transformer feeds a NEMA 3R 400-amp, 208Y/120V three phase main circuit breaker panel. This secondary panel contains four 100-amp, 2-pole, 250V breakers protecting four 100-amp, 125/250V, 4100R12W receptacles. Protective Construction: The transformer and distribution assembly is mounted onto a rugged carbon steel frame with integrated skid pockets and a top located lifting eyelet to allow easy transport. The standard frame construction is _ inch thick, 3 inch square tubing frame. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customers needs. This power distribution system is designed for outdoor use and applications including but not limited to, plant maintenance, hazardous location operations, as a welding station, shows, exhibits, and marine applications. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MPD-480D-CMLK-150KVA-208.120-4X2P.100A Temporary Power Distribution Ratings Line In: (One Set) 400A E1016 Male Cam-locks 600V Rated [Brown, Orange, Yellow, Green] Max OCP Primary: 200A @ 480V Primary Voltage: 480VAC 3PH Max OCP Secondary: 400A @ 208V Primary Input: Male Panel Cam-locks Max Secondary Output: 400A @ 208V Primary Protection: 200A 480V 3PH Time Delay Fuse Block UL 1640 Portable Power-Distribution Equipment Transformer: 150KVA 480V to 208Y/120V 3PH 60 Hz N3R NEMA 3R Indoor or Outdoor Use Secondary Voltage: 208Y/120VAC 3PH Made in the USA Secondary Panel: 400A 208Y/120V 3PH MCB N3R Secondary Breakers: (4) 100A 2P [250V] Secondary Receptacles: (4) 100A 4100R12W [125/250V] Special Orders- Requirements Secondary Protection: Weatherproof Covers Contact us for special requirements Form Factor: Square tube frame w/ 1/4" thick, 3" tubing, skid pockets, top pick eye & 8” locking casters Phone: 1-214-616-6180 Frame Materials: Powder coated steel frame Toll Free: 888-325-4448 Dimensions: 40" x 32" x 60" Fax: 1-903-498-3364 Weight: - E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local code and meet the minimum requirements of the Nation Electrical Code (NEC Section 250) Scroll Down to Purchase