Larson Electronics 150 Watts Magnetic LED Light w/ 20' Cord and L6 Plug - 30 LEDs - 14,790 Lumens - 120-277V AC

Buy American Compliant The LEDP5W-30-M-1227-20L6 High Output Magnetic Mount LED Light offers high output from a compact form factor and is ideal for use in mining applications as well as heavy equipment, hunting, boating, vehicle, military, law enforcement and industrial manufacturing uses. A 14,790 lumen output, 1.25 amp draw @ 120V, 50,000 hour service life and 120 to 277 volt AC compatibility provides mine operators with a rugged and powerful LED alternative to 400 watt metal halide lamps that uses little power and can withstand rugged use and abusive conditions. The LEDP5W-30-M-1227-20L6 magnetic LED light from Larson Electronics is an ideal replacement for fragile and hot running 400 watt metal halide lamps. They offer Pulse Width Modulation control, a small profile, low power requirements, high durability and a versatile mounting system that makes these LED light emitters a superior lighting solution for demanding applications where power and reliability is critical. The heavy duty design and high power of these LED lights also makes them suitable for a wide array of applications including but not limited to: military, industrial manufacturing, machine visioning, security and law enforcement, boating, vehicles and commercial structure illumination. These lights include an inline transformer and 20 feet of cord fitted with a L6-20 twist lock plug for connection to twist lock outlets. Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle” accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours. PWM Control: The pulse width modulation drivers in this unit also provide secondary benefits through the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LEDP5W-30 series light bars can operate on current ranging from 120 to 277VAC without any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED failure without it. Magnetic Mounting: This unit is also equipped with two 200 lbs grip magentic feet, which provides a total of 400 lbs of grip and allows operators to securely mount this unit to metallic surfaces such as tank walls or equipment, and mount the light as a temporary work area light. This unit is lightweight and the aluminum frame and adjustable carry handle allows operators to simply carry the unit from one location to another as needed and adjust the handle to any position for better mounting versatility.The light housing and handle are adjustable and can be moved vertically by loosening two thumb bolts located on either side and moving to the desired positions. Specifications / Additional Information LEDP5W-30-M-1227-20L6 LED Light Bar Internal LED Driver Features Lamp Type: CREE XLamp-XPG¨ LED Automatic Current Sensing and Adjusting 9-32VDC Dimensions: 11.69 "-L 7.54"-H 4.94"-D Active Heat Management Weight: 13 Lbs Ambient Op Temp -40C to +80C Voltage: 120-277V AC UL1012 Compliant Watts: 150 UL60950-1 Compliant Lumens: 14,790 LED Life Expectancy: 50,000 hours LED Light Color: White Color Temp: 6000K Lighting Configuration: 25¡ Spot or 60¡ Flood Led Drive %: 90% Optics Efficiency: 90% Amps: 1.25 (on 120 volts) Special Orders- Requirements Housing Colors: Black Contact us for special requirements Materials: Aluminum Housing, Polycarbonate Lens Toll Free: 1-800-369-6671 Mounting: Magnetic Mount w/ 360 Degree Adjustable Wiring: 20ft cable w/ L6-20 twist lock plug E-mail:[email protected] 3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, we will ship a new replacement. Scroll Down to Purchase-