Larson Electronics 150 KVA Transformer Power Distribution - 480V Primary to 120/208Y Secondary - 400 Amps - ALU

MADE IN THE USA This Larson Electronics power distribution system takes 480 volt 3-phase power and converts it to 400 amps of 120/208Y, available via one 400-amp Veam Power Lock connector. 120/208Y is also available via a 200-amp sub panel with protection for a L15-50 receptacle, a L6-50 receptacle and four 120 Volt Edison style connectors. This power distribution system is encapsulated in a powder coated steel frame with top pick eye, skid pockets and locking casters. 200-amp NEMA-3R 600v 3-phase circuit breaker enclosure with single lock off on the breaker. 150KVA Transformer (NEMA 3R) with tap settings for primary voltage of 420, 410, 390, 380, 370 and 360 50/60hz and secondary of 120/208Y. Transformer will be sub metered by DORK LCD Digital Meter that will read primary and secondary voltage via a digital display on the transformer. 400 amp 120/208Y 3-phase rated MLO panel, NEMA 3R, with feed-through bus and 200 amp breaker. Sheet metal enclosure at base of 400 amp panel houses a single Veam Power Lock 400-amp feed-through connector (part number PBX-SLF-PS-EU-400). 200-amp breaker in the 400-amp MLO panel feeds a 200-amp 3-phase main breaker NEMA 3R panel with 42 circuits. 200 MCB panel includes: One 120 volt 50 amp breaker (for L15-50 Hubbell connector with watertight cover) One 208Y volt 50 amp breaker (for L6-50 Hubbell connector with watertight cover) Two 20 amp 120 volt breakers (for a 4-gang Edison connector set) The transformers have aluminum windings and the panels have aluminum buses. Click Photo to Enlarge Power Distribution system is mounted on a 12-gauge steel floor within 2 inch square tubing, 3/16 thick, steel frame. The frame is blasted and powder coated and equipped with top pick eye, fork lift pockets and 6 inch locking casters. Dimensions: 60 inches long by 50 inches deep by 80 inches tall Weight: 650 pounds Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, hazardous location operations, shows, exhibits, and shipyard operations. These power transformers are popularly used in applications where external power sources are often necessary and work well in combination with explosion proof lights and equipment. Larson Electronics is a manufacturer and as such can build portable transformer systems to your specifications. Although we carry several models of power distribution transformer systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MPD-480-200D-150K-1XVE400-1X120-1X208-4X120-ALU Power Distribution Substation Ratings Line In: Three Phase 480 VAC with SO cable provided by customer UL 1640 Portable Power-Distribution Equipment Line Out: Single Phase 120V/208Y NEMA 3R Indoor or Outdoor Use Transformer KVA: 150 KVA Made in the USA Dimensions: W-60" X L-50" X H-80" Frame: Powder coated/painted steel frame with diamond plate base Transport: 6 inch locking polyurethane casters, forklift access and pick eye Special Orders- Requirements Ground: Mechanical Ground Contact us for special requirements Weight: 650lbs Toll Free: 888-325-4448 American Made E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase