Larson Electronics 15 KVA Power Distribution Station - (8) 480V Outlets & (6) 120V GFI Outlets

Made in Texas The Larson Electronics MGS-8X480.100A-15KVA-6X120.20A temporary power distribution system converts 480 VAC current to single phase 120V AC 60 Hz. This power distribution system provides operators the ability to safely tap into and distribute 480V AC and 120V AC power from a variety of sources including generators and direct grid power. This portable substation is suitable for outdoor applications, with a fully potted transformer and NEMA 3R load center. This power distribution system is configured to transform 480V to 240/120V Delta. Operators can connect up to six devices on 120V circuits via 5-20R GFCI receptacles and eight 480V tools via the pin/sleeve 4100R7W receptacles with covers. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* The MGS-8X480.100A-15KVA-6X120.20A temporary power distribution system provides a safe and reliable way for operators in industrial settings to tap into and utilize power sources independently of the work area. This unit provides an effective power distribution system for operators performing plant turnarounds, maintenance, equipment installations and any activities requiring an alternative to native power sources. This portable transformer is designed to operate with 480V, three phase, 60hz which it then steps down to single phase 120V AC. The power distribution system on this portable substation makes 120V AC available via (6) 5-20R 20A, 125V GFCI protected duplex receptacles and (8) 480V AC available via (8) 4100R7W 100A, 480V receptacles. Description: Operation: The customer provided line-in cord brings 480V three phase power to the NEMA 3R 600-amp main breaker 480V three phase primary main panel, which contains eight 100-amp breakers protecting eight 100-amp, 480V, 4100R7W receptacles and one 40-amp, 480V breaker protecting the 15 KVA transformer. The NEMA 3R 15 KVA transformer converts 480V three phase power to 120/240V single phase and passes the current to the secondary panel. The secondary side of the transformer feeds a NEMA 3R 125-amp, 120/240V single phase main lug panel. This secondary panel contains four 6-amp, 120V breakers protecting six 20-amp, 5-20R GFCI protected duplex receptacles. All receptacles are equipped with weatherproof covers. Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MGS-8X480.100A-15KVA-6X120.20A Temporary Power Distribution Line-In Cord:Customer Provided Max OCP Primary: 600A @ 480V Line-In Cord Cap: Customer Provided UL 1640 Portable Power-Distribution Equipment Primary Voltage: 480V 3-Phase NEMA 3R Indoor or Outdoor Use Primary Disconnect: - Made in the USA Primary Panel: 480V 600A MB N3R Primary Breakers: (8) 100A [480V RCPT], (1) 40A [XMFR] Primary Receptacles: (8) 4100R7W Primary Protection: Main Breaker, Weatherproof Covers Transformer: 15KVA 480V 3-Phase to 120/240V 1-Phase N3R Secondary Voltage: 120V 1-Phase Secondary Panel: 120V 125A MLO N3R Secondary Breakers: (6) 20A [120V] Secondary Receptacles: (6) 20A 5-20R [120V] Secondary Protection: GFCI [5-20R], Weatherproof Covers Special Orders- Requirements Form Factor: Square tube frame, skid pockets, top pick eye & locking 8” locking casters Contact us for special requirements Frame Materials: Powder coated steel frame Toll Free: 888-325-4448 Dimensions: 32” X 44” X 58” Weight: 500 pounds E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase