Larson Electronics 120W Dual LED Light Fixture with Adjustable Beam Clamp Mount - 10800 Lumens - 100' SOOW Cord

The WAL-HDBC-2XWP60E-100 from Larson Electronics is a Dual LED Beam Clamp Light fixture that features two independently adjustable LED light heads that produce 5,400 lumens each for a total of 10,800 lumens of high-intensity LED light output while drawing a total of 120 watts. The WAL-HDBC-2XWP60E-100 also features a sturdy adjustable I-beam clamp mounting system, making it suitable for illumination in construction sites, industrial facilities and civil engineering projects. Each light head on this unit produces a long flood beam of light while drawing only 0.5 amps at 120V AC. The light assembly consists of six high powered LEDs paired with high purity specular optics to produce a wide light distribution overpowering that of a 500 watt quartz flood lights. This light is constructed of three angled boards that helps provide a wider spread. Instead of the light only shining forward, the center board is concentrated to go straight out while the boards on the side are 45¡ offset. Each light head on the WAL-HDBC-2XWP60E-100 consists of forty-five LEDs housed within a waterproof aluminum housing that is powder coated for added durability and resistance to corrosion. The housing incorporates integral cooling fins for efficient heat dissipation and increased LED longevity. The LED lamp assembly is protected by a shatterproof polycarbonate lens which is secured to the housing with a waterproof seal. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Click Photos to Enlarge 5-15 Straight Blade Plug15 Amp / 125V Rated L5-15 Twist Lock Plug15 Amp / 125V Rated L6-15 Twist Lock Plug15 Amp / 250V Rated UK BS1363 Straight Blade Plug13 Amp / 250V Rated / Internal Fuse Intl Schuko 2-Pin Plug16 Amp / 250V Rated / Grounded Flying Leads / Pigtail Wires Wiring and Plug: This LED flood lighting system is equipped with 100 feet of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, standard 6-15 15 amp straight blade plug for 220-240V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug. Mounting: A custom designed I-beam mounting bracket allows for easy attachment of the fixture to any I-beams (up to 10") commonly found in construction sites and civil engineering projects. The component`s ability to resist bending ensures stable lighting performance in rough environments. During installation, the mounting bracket slides over the beam’s horizontal flanges. After securing the preferred position on the I-beam, the operator can then tighten the fixture to the beam using the two adjustable handles. It is important to tighten both handles evenly and securely to prevent shaking or uneven positioning. Operators may reposition the light on the beam by loosening the handles, moving the unit to the desired location and tightening the handles. Note: This mounting system comes in the following I-beam size options: 2", 3", 4", 5", 6", 7", 8", 9", 10" and 12". The orientation of the mounting component may also be customized to accomodate vertical or horizontal positioning (please select the preferred I-beam size and orientation below). Suggested Applications: Construction sites, surveying, civil engineering applications, inspections, large-scale installations, maintenance and repair projects, industrial facilities, outdoor lighting, temporary lighting systems, supplementary lighting, rugged environment applications and more. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. High Quality Features Superior LED Benefits 1. Low power consumption.2. Instant on/off operation.3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.4. Superior color rendering compared to HPS, LPS, MH.5. Retains 70% lumen output after 50,000 operating hours.6. Powder coated aluminum fixture body. 7. I-beam clamp mount included8. Low profile - Light weight9. 10,800 Lumen output from 120 watts 1. 50,000+ hour lifespan.2. Can SAVE 50% or more on energy.3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.4. Reduces energy use and prolongs life-spans of peripheral cooling units (A/C, refrigeration)5. 100% recyclable.6. No toxins-lead, mercury.7. No UV light, infrared radiation or CO2 emissions.8. Qualifies buildings for LED and other sustainable business certifications.9. Bright, even light maintains consistent color over time.10. Instant on/off - No flickering, delays or buzzing. 11. Very good color rendering.12. Vibration/impact resistant.13. Significantly cooler operation.14. Less frequent outages, higher output improves workplace safety. Specifications / Additional Information WAL-HDBC-2XWP60E-100 I-Beam Clamp Mount LED Light Features Lamp Type: LED Waterproof/Vapor Proof Dimensions: Each Light Head - 9"W x 3.25"D x 6.5"H Operates on Standard 110-277V AC Weight: 20 lbs Impact/Vibration Resistant Construction Voltage: 120-277 Volts AC 50/60hz 50,000 Hour LED Life Total Watts: 120W (60W Per Lamp) ETL Approved for Wet Locations Total Lumens: 10,800 (5400 Per Lamp IP68 Waterproof Luminous Efficacy: 90 Lm/W I-Beam Clamp Mount Lamp Life: 50,000+ Hours Color Temp: 6000K Color Rendering Index: >75 Beam Angle: 60¡ Vertical, 75¡ Horizontal Lighting Configuration: Flood Beam Power Efficiency: >95% Power Factor: 0.992 Amperage: 0.5A @ 120V, 0.25 @ 240V, 0.22 @ 277V Ambient Temp Range: -25¡C to +60¡C Housing Material: Cast Aluminum Lens Material: Polycarbonate Special Orders- Requirements Mounting: Adjustable Beam Clamp Mount Contact us for special requirements Wiring: 100` 16/3 SOOW w/ Cord Cap Toll Free: 1-800-369-6671 Cord Cap: 5-15, 6-15, 5-20, 6-20, L5-15, L6-15, L5-20, L6-20, BS1363, Schuko, or Pigtail Warranty: Yes - 3 Years E-mail:[email protected] 3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement. -Scroll Down to Purchase-