Larson Electronics 12' Light Mast w/ Electric Winch - 7' to 12' - 120V - Fixed Mount, Base Plate - 3/4" Coiled Cord LM-12-7-3S-FM-EW-120V-NYC

The LM-12-7-3S-FM-EW-120V-NYC from Larson Electronics is a 3-Stage Light Mast with Electric Winch that provides a safe and effective way for operators to quickly deploy lights, security cameras, and other equipment to elevations of up to 12 feet. Equipped with a 3/4" weatherproof coiled cord, this light tower features a rotating boom that allows for 360¡ of rotation, one electric winch that operates on 120 V, and a removable mast head for storing mounted equipment when not in use.

*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS, LIGHT TOWERS, OR TRIPODS*

This telescoping three stage steel light mast from Larson Electronics is designed to allow operators to quickly and safely deploy lighting, cameras, and other electrical equipment in locations where this equipment must be elevated to heights up to 12` for effective coverage. This light boom can be extended to 12` for maximum area coverage and collapsed to 7` for applications where a smaller footprint is required. The tower is constructed of square steel tubing with a lower section 3.86` in length and 4" by 4" by 1/8" thick, middle section 4.15` in length and 3" by 3" by 1/8" thick, and an upper section 4.56` in length and 2 1/2" by 2 1/2" by 1/8" thick. The mast is elevated using one 1,000 lb electric winch with 3/16" cable. The electric winch operates on 120 V.

Locking Pin	Towers Rotated	Control Panel
	Ê
Raised	Ê	Back

The LM series towers are available in two finish options: powder coated with glossy blue finish for corrosion resistance and aesthetics, or hot dip galvanized for superior corrosion resistance. This light mast can be mounted to trailers or other stable surfaces via a 13" x 15" x 1/4" thick mounting base plate which has been drilled to accept six 9/16" anchor bolts (anchor bolts not included). A 44" wide and 2" by 2" by 1/4" thick mounting plate is attached to the upper section of the mast which provides a strong and stable platform for mounting fixtures and equipment.

The LM family of telescoping towers feature a proprietary mast guidance system, which provides increased stability during high winds. When lowered to 7 feet, the mast can withstand winds up to 125 mph. When elevated to its full upright position, the mast can be rotated a full 360¡. By loosening the T-Handle, operators can rotate the mast with ease in either direction. The mast can be positioned in one of four different directions, and locked back in place by re-tightening the T-handle. The mast itself spins freely and can typically be rotated with a single hand.

Wire Management: The LED light tower includes a weatherproof 3/4" coiled cable that runs the length of the tower to secure wiring during deployment. The wiring wraps around the mast and ends in a top located junction box. This wire management prevents installed cable from getting hung up during deployment operations and reduces chances of damage to the cable.

Mast Hand Control

This light tower weighs approximately 400 lbs and can easily support and lift customer-provided fixtures. The entire tower assembly is shipped via common freight carrier and when shipped measures approximately 16.5` long, 4` wide, 5` tall and weighs approximately 1075 lb. Larson Electronics can custom tailor these units to the customer`s requirements with longer sections and larger mounting plates. We also offer a choice of either the electric 1,000 lb hand winch or optional manual winches.

Suggested Applications: Temporary lighting, construction sites, and security camera deployment. We can equip this mast with 1000W or 1500W Metal Halide lights or a wide variety of high powered LED lights with comparable power, including the LED10WSA-160, LEDLB-200X2E, LEDLB-160X2E or LEDLB-80x2E.