Larson Electronics 112.5 KVA Power Distribution - 480V to 240D/208-120V 3PH - (6) AR642 (4) L15-30R (12) GFCI Duplex

Made in Texas The Larson Electronics MPD-480X6-112.5K-12X120-4X240-CWRF-V3 power distribution substation converts 480V AC electrical current into three phase 240D/208-120V. This unit provides operators the ability to safely tap into and distribute 480V AC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Portable Power Distribution Purpose and UseThe MPD-480X6-112.5K-12X120-4X240-CWRF-V3 portable power distribution system gives operators the ability to power their 480 volt, 240 volt and 120 volt equipment from a single system. On the primary side, operators connect 480V line-in power using a 20` 350KCMIL Type W cord to six 480V AR642 receptacles (compatible with APJ6485 plug). On the secondary side, operators connect to four L15-30R receptacles for 240V equipment and to twelve GFCI duplex receptacles for 120V equipment. All receptacles are equipped with weatherproof covers. Operation: A 20` Type W line-in cord brings 480V three phase power to the NEMA 3R 600-amp, 480V three phase main circuit breaker panel, which contains six 60-amp breakers protecing six 60-amp, 480V AR642 receptacles (compatible with APJ6485 plug), and passes power through to the transformer. The NEMA 3R 112.5 KVA transformer converts 480V to 240D/208-120V three phase and passes the current to the secondary panel. The secondary side of the transformer feeds a NEMA 3R 200-amp, 240D/208-120V three phase main circuit breaker panel. This secondary panel contains four 30-amp breakers protecting four 30-amp, L15-30R, 240V receptacles, and twelve 20-amp breakers protecting twelve 20-amp, 120V GFCI duplex receptacles. Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer is mounted on a 1/8” thick carbon steel plate mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 3/16" thick square carbon steel tubing frame, resulting in an extremely stable, durable, and well protected power distribution platform. This model is equipped with 10.5" x 3.5" heavy duty flat-free tires, fork lift skid pockets, and a top located lifting eyelet which allows easy lifting with crane or chain hooks. Larger units are available upon request, and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4x equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MPD-480X6-112.5K-12X120-4X240-CWRF-V3 Power Transformer Line-In Cord: 20` 350KCMIL Type W Max OCP Primary: 600A @ 480V Line-In Cord Cap: Customer Provided Max OCP Primary: 200A @ 240V Primary Voltage: 480V 3PH UL 1640 Portable Power-Distribution Equipment Primary Disconnect: - NEMA 3R Indoor or Outdoor Use Primary Panel: 600A 480V 3PH MCB Panel N3R Made in the USA Primary Breakers: (6) 60A Primary Receptacles: (6) 60A AR642 [480V] - Compatible with APJ6485 Primary Protection: Weatherproof Covers Transformer: 112.5 KVA 480V to 240D/208-120V 3PH N3R Secondary Voltage: 240D/208-120V 3PH Secondary Panel: 240D/120V 3PH 200A MCB Panel N3R Secondary Breakers: (4) 30A (12) 20A Secondary Receptacles: (4) 30A L15-30R [240V] (12) 20A GFCI Duplex [120V] Secondary Protection: GFCI, Weatherproof Covers Special Orders- Requirements Form Factor: (4) 10.5" x 3.5" `Flat-Free` Tires Contact us for special requirements Frame Materials: Powder coated steel frame Toll Free: 888-325-4448 Dimensions: 42"-L x 42"-W x 65"-H Weight: 800 pounds E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase