Larson Electronics 100KVA Power Distribution - 480V 1P Pri. - 240/120V Sec. - 16x 240V 20A & 6x 120V 20A Outlets

Made in Texas The MPD-480-100KVA-16X240.20-6X120.20 portable power distribution system is designed to enable operators to connect to 480V single phase primary voltage and step it down to 240/120V single phase to operate lights and equipment. On the secondary side, operators can connect up to six 120V, 20-amp devices and sixteen 20-amp, 240V devices via the secondary electrical trough. This versatile system enables operators to make the most of a single 480V 1-phase connection via an operator provided line-in cord. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Operation: The 25` 1/4 Type-W line-in cord brings 480V three phase power to the 200-amp, 480V, 1-phase fused disconnect , which contains two 200-amp time delay fuses protecting the 100 KVA transformer. The NEMA 3R transformer converts 480V single phase power to 240/120V and passes the current to the secondary disconnect and panel. The secondary side of the transformer feeds a NEMA 3R 500-amp main breaker panel. This secondary panel contains six 20-amp, 120V breakers protecting six 20-amp, 5-20R duplex receptacles, and sixteen 20-amp, 240V breaker protecting eight 6-20R duplex receptacle. All receptacles are equipped with waterproof covers. Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking polyurethane casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MPD-480-100KVA-16X240.20-6X120.20 Power Distribution System Ratings Line-In Cord: 25` 1/4 Typw-W UL 1640 Portable Power-Distribution Equipment Primary Voltage: 480V 1P NEMA 3R Indoor or Outdoor Use Primary Disconnect: 200A Fused @ 200A Made in the USA Transformer: 100KVA 480V-1P to 240/120V-1P N3R Secondary Panel: 240/120V 1P N3R 300A Secondary Breakers: (16) 20A (240V RCPT) & (6) 20A (120V RCPT) Secondary Panel Outlets: (16) 6-20R (240V) & (6) 5-20R (120V) - All w/ Weatherproof covers Form Factor: Square tube frame w/ skid pockets, top pick eye & locking 8” casters Dimensions: 34”-L X 40”-W X 58”-H Weight: 650lbs Special Orders- Requirements Features: Contact us for special requirements Max Primary OCP: 200A @ 480V 1P Toll Free: 888-325-4448 Max Secondary OCP: 500A @ 240V 1P E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase