Larson Electronics 1000W Metal Halide Light Tower - 110,000 Lumens - 5' Aluminum Base Stand - Wet Area Use

The Larson Electronics WAL-24BS-1X1000W-MHFL Metal Halide Light Tower offers intense and portable illumination for industrial projects. The portable metal halide unit is mounted to a 24-inch wide, four-leg aluminum base. This 1000-watt unit is constructed of die cast aluminum and is suitable for wet areas. The WAL-24BS-1X1000W-MHFL is a portable lighting solution for temporary work sites. This 1,000-watt light tower offers 110,000 lumens of output with a flood-beam configuration for wide-area illumination. Suitable for wet areas, the base stand extends to 5 feet for elevated lighting preferences. The ballast contained within this fixture is multi-tap and allows operation with current of 120, 208, 240, and 277 volts with 480V and 220V options also available. A thermal, tempered, shock resistant, 5/32" thick glass door and heavy duty silicone gasket protects the metal halide lamp from outdoor elements. The door is held captive to the fixture for convenience and safety and the door frame is constructed of die cast aluminum. The lamp housing is constructed of die cast aluminum and features an anodized aluminum reflector, captive held lamp door, separate ballast compartment, stainless steel hardware and an attractive polyester powder coat finish. This lamp is ideal for use in locations where operators need expansive and powerful illumination yet want fixtures that will help to retain a degree of attractive appearance. Click Photos to Enlarge 5-15 Straight Blade Plug15 Amp / 125V Rated L5-15 Twist Lock Plug15 Amp / 125V Rated L6-15 Twist Lock Plug15 Amp / 250V Rated UK BS1363 Straight Blade Plug13 Amp / 250V Rated / Internal Fuse Intl Schuko 2-Pin Plug16 Amp / 250V Rated / Grounded Flying Leads / Pigtail Wires Wiring/Plug: The light tower is equipped with a chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets on the other end. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, standard 6-15 15 amp straight blade plug for 220-240V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug. Base Stand Mount: The metal halide lamp is mounted on a 5-foot base stand fabricated from non sparking aluminum. Transferring the unit through manholes consists of simply removing the light head from the base, passing the light head and base through the manhole separately, and then reassembling the unit once inside. The lamp can be easily adjusted up or down 90 degrees and locked into position by simply loosening the two hand screws located on either side of the light head and re-tightening them once the desired angle is found. Note: Use only lamps specified on nameplate. Bulb not included with fixture. Observe lamp manufacturer’s recommendations and restrictions on lamp operation, particularly ballast type, burning position, etc. Applications: Remote work locations, wide-area illumination, construction sites, military bases, camping sites, outdoor events, security applications, emergency services, outdoor lighting, portable lighting and more. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information WAL-24BS-1X1000W-MHFL Metal Halide Light Tower Ratings Lamp Type: Metal Halide UL Rated for Wet Area Use Lamp Dimensions: 10 1/4" x 29" x 23 3/4" UL Rated for Ground Mounting Within 4` of Ground Stand Height: 5` Voltage: 120-277V AC or 480V Watts: 1,000 Lumens: 110,000 Lumens Per Watt: 102 Lighting Configuration: Flood Pattern Materials: Die Cast Aluminum Mounting: Aluminum Base Stand Special Orders- Requirements Cord Cap Options: 5-15 Straight, 6-15 Straight, L5-15 Twist, L6-15 Twist, UK BS1363, Intl. Schuko, Pigtail Contact us for special requirements Wiring Phone: 1-214-616-6180 1. Connect black fixture lead to the (+) LINE supply lead. Toll Free: 888-325-4448 2. Connect white fixture lead to the (-) COMMON supply lead. Fax: 1-903-498-3364 3. Connect ground wire from fixture to supply ground. E-mail: [email protected] Down to Purchase-