Larson Electronics 0.5kVA & 6kVA Explosion Proof Transformers - C1D1&2 - 3PH - 600V Delta Primary - 120V Secondary

The ETX-600D-6KVA-500VA-110V-4X0.75 from Larson Electronics is a Pair of Transformers with an Explosion Proof Enclosure for use in hazardous areas. These three phase transformers are powerful, reliable and designed with the environment in mind. Suitable for both indoor and outdoor applications, the ETX-600D-6KVA-500VA-110V-4X0.75 provides increased reliablity and protection against critical equipment failures. The lower operating costs, lower heat emissions and lower cost of ownership make these transformers ideal for a wide range of applications and businesses. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* First Transformer Features: With a transformer rating of 0.5kVA (500 VA), the first transformer in the ETX-600D-6KVA-500VA-110V-4X0.75 explosion proof transformer set is a 50/60Hz three phase unit with a primary voltage of 600V Delta. It also provides a secondary voltage of 110V. Featuring robust construction, this unit`s cores are manufactured with non-aging, cold-rolled silicon steel laminations using state of the art technology. The first transformer boasts a low cost of ownership and is highly energy efficient. Lower heat emissions mean less cooling is needed as well. The unit also features 180¡C insulation with a 80¡C temperature rise. Second Transformer Features: With a transformer rating of 6kVA, the second transformer in the ETX-600D-6KVA-500VA-110V-4X0.75 explosion proof transformer set is a 60Hz three phase unit with a primary voltage of 600V Delta. It also provides a secondary voltage of 110V. Featuring robust construction, this unit`s cores are manufactured with non-aging, cold-rolled silicon steel laminations using state of the art technology. The second transformer also boasts a low cost of ownership and is highly energy efficient. Lower heat emissions mean less cooling is needed as well. The unit also features 180¡C insulation with a 135¡C temperature rise. Benefits: The ETX-600D-6KVA-500VA-110V-4X0.75 explosion proof transformers offer many benefits to the consumer. Precision cut copper transformer winding material help to improve performance. The close tolerances used during manufacturing also eliminates burrs which hinder performance. Each core is specially coated to prevent the ingress of moisture and are electrically balanced to minimize axial forces during short circuit situations. These transformers provide owners with significant energy savings as well as offering environmental benefits. Higher efficiency not only extends the life of the transformer, but also turn into cost savings for owners in the form of lower energy bills and decreased cost of ownership. Enclosure: The transformers in the ETX-600D-6KVA-500VA-110V-4X0.75 are located inside an explosion proof enclosure. The explosion proof enclosure holding the transformers is rated for Class I Divisions 1 & 2 Groups B, C and D, Class I Zones 1 & 2 Groups IIB + H_ and IIA, Class II Divisions 1 & 2 Groups E, F and G and Class III Divisions 1 & 2 hazardous areas. The cast aluminum enclosure is factory tapped with four 3/4" NPT holes and is ideal for indoor or outdoor applications where flammable vapors, gases, or dusts exist or stand the potential to exist. The enclosure of the ETX-600D-6KVA-500VA-110V-4X0.75 is ATEX / IEC Ex Certified and has internal dimensions of 36"L x 24"W x 10"H. The explosion proof enclosure is made of cast aluminum, is equipped with stainless steel hinge and bolts, and includes a watertight gasket for a NEMA 4X protection rating. The internal cavity of this flameproof enclosure measures 36" in length by 24" in width by 10" in height. A removable backplate for easy mounting of equipment outside of the enclosure can be provided at an additional cost. Four 3/4" NPT hubs are factory tapped to allow conduit entry into the enclosure. Mounting is provided by four ears, two per side of the enclosure. Applications: Situations that require transformer use within hazardous locations. Larson Electronics is a manufacturer and as such can build stationary and portable transformer systems to your specifications. Although we carry several models of power distribution transformer systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information ETX-600D-6KVA-500VA-110V-4X0.75 Explosion Proof Transformers Ratings/Approvals First Industrial Control Transformer Class I Divisions 1 & 2 Groups B, C and D Phase: Three Phase Class I Zones 1 & 2 Groups IIB + H_ and IIA Frequency: 50/60Hz Class II Divisions 1 & 2 Groups E, F and G kVA: 0.5kVA (500 VA) Class III Divisions 1 & 2 Primary Voltage: 600V Delta NEMA 3, 4, 4X, 7 (B, C, D) & 9 (E, F, G) Taps: None CENELEC/ATEX/IEC Ex Certified Secondary Voltage: 110V Ex d IIB + H_ T5 or T6 Winding Material: Copper Ex tD A21 IP66 Insulation: 180¡C Tamb = + 60¡C Temperature Rise: 80¡C Industrial Control Transformers Impedance (Std): - Seismic: Yes Sound Level: Meets NEMA ST-20 Standards Primary Termination: - Secondary Termination: - Enclosure Material: Cast Aluminum w/ Stainless Steel Hinges & Bolts Enclosure Taps: (4) 3/4" NPT Hubs Enclosure Internal Dimensions: 36"L x 24"W x 10"H Transformer Dimensions: 5.66"H x 5.25"W x 5.53"D Second Industrial Control Transformer Phase: Three Phase Frequency: 60Hz kVA: 6kVA Primary Voltage: 600V Delta Taps: 4 - 2.5% FCBN Secondary Voltage: 110V Winding Material: Copper Insulation: 180¡C Temperature Rise: 135¡C Impedance (Std): - Seismic: Yes Sound Level: Meets NEMA ST-20 Standards Primary Termination: - Special Orders- Requirements Secondary Termination: - Contact us for special requirements Transformer Dimensions: 14.56"H x 7.56"W x 7.15"D Toll Free: 888-325-4448 Total Unit Weight: 357.2 lbs Mounting: Floor or Wall Mount E-mail: [email protected] -Scroll Down to Purchase-