Larson Electronics Triple Gang Portable Explosion Proof GFCI Protected Receptacles - Three 20 Amp Outlets - Class I

Made in the USA The Larson Electronics EPEXC-3O-GFCI-3X20A explosion proof power outlet provides ground fault protection for portable electrical devices and equipment in locations where equipment is susceptible to wet and corrosive environments. This 60 amp rated triple gang Portable Explosion Proof Receptacle provides required ground fault protection and is deal for operators seeking a high quality, wet area rated power receptacle suitable for use in industrial and manufacturing applications. This unit`s power features three receptacles that are constructed of copper free aluminum and meets all UL and CSA requirements for ground protection. The units receptacles are factory sealed and any arcing is safely contained with the interior of the receptacle. The receptacle contacts are deep recessed to avoid accidental contact and will accept standard non explosion proof plugs that are NEMA 5-20R, or 6-20R compatible although explosion proof plugs must be used to preserve explosion proof approval in hazardous environments. Ordinary location plugs will NOT activate this explosion proof receptacle. The receptacle is finished with an epoxy powder coat. This unit is designed to withstand wet and corrosive conditions such as those found in docks and shipyards and comes with a spring loaded receptacle door to prevent ingress of water and contaminants when the unit is not in use. Click Photo to Enlarge The EPEXC-3O-GFCI-3X20A triple gang ground fault protection power receptacle constructed of non sparking aluminum and finished with an epoxy powder coating and provides open neutral protection to maximize safety for plant personnel. The internal receptacle plug contacts are constructed of brass and designed to maintain constant pressure along their entire length for superior connectivity. The 20 amp plug receptaclea are deeply recessed to prevent accidental contacts and designed for twist lock plug insertion to provide secure connections. A neoprene seal fitted inside the connector receptacle seals against the plug when inserted to provide positive sealing against water ingress. A spring loaded receptacle door provides an automatic weather-tight seal when the plug is removed. This portable receptacle includes 5 foot of 8/3 SEOW (chemical, abrasion resistant cord for wet/outdoor use) cord, a 60 amp Class I Division I pin and sleeve type explosion proof plug, and a convenient carrying/hanging handle. The mate outlet mate for this 60A plug is the Larson Electronics EPO-60A. This outlet is a mate for the Larson Electronics EPP-15A and EPP-20-A explosion proof plugs and is compatible with all the Larson Electronics explosion proof lights we make with an explosion proof plug. Circuit breaking protection: Provides required portable ground fault protection and meets all UL and CSA requirements for ground fault protection in hazardous locations. Inter-Compatibility: These units are compatible with Crouse Hind™ plugs under catalogue number ""ENP5151" and Hubble-Killark Acceptor¨ plugs under catalogue number "UGP-20231,UGP-20232 ". Due to possible manufacturer changes we cannot guarantee interchangability although we have made every effort to ensure cross compatibility correctness. Suggested Applications: Areas Where Ignitable Vapors Or Gases May Be Present, Manufacturing, Industrial, Commercial, Docks, Shipyards, Shipping Ports and other similar ship to shore applications as well as any application requiring a wet area suitable and highly durable source of secure power connection. Features 1. Specially designed receptacle contains arcs within the unit.2. Spring loaded door seals receptacle when not in use.3. Brass contacts provide constant pressure and superior conductivity.4. Accepts non explosion proof plugs that are NEMA 5-20R, or 6-20R compatible.5. Neoprene seal compressed by plug prevents water ingress into receptacle when in use.6. Rated to handle loads up to 20 Amps.7. Open Neutral Protection to maximize safety for plant personnel. 8. Compatible with Crouse Hind™ "ENP5151" and Hubble-Killark Acceptor™ "UGP-20231,UGP-20232 " plugs.8. High Intensity LED Pilot Light.9. Corrosion resistant and suitable for use in wet locations. Specifications / Additional Information EPEXC-3O-GFCI-3X20A Explosion Proof Power Outlet Plug / Outlet Certifications Unit Dimensions: 6.25"-W X 5.92"-D .12.90"-L Class 1, Division 1 & 2 Groups C, D Receptacle Current Rating: 20 Amp Class 2, Division 1 & 2 Groups F, G Configuration: 2 Pole 3 Wire Class III Number of Poles: 3 NEMA 3, 3R, 7CD, 9FG Conduit Openings: N/A UL Standard: 943, 1203 Mating Plugs: ****EPP-15A, EPP-20-A**** EPO-60A CSA Standard: C22.2 No. 30 Grounding: Open Neutral Protection Unit Materials: Receptacle- Copper Free Aluminum (4/10 of 1% max.) Finish: Epoxy Powder Coat Insulating Blocks: Fiber Glass Reinforced Polyester Special Orders- Requirements Contact us for special requirements Toll Free: 888-325-4448 Fax: 1-903-498-3364 E-mail: [email protected] U.L. Certification