Larson Electronics Telescopic Tower - 7'-18' Height - 25 lb Capacity - Fixed Mount - 4 Stage Aluminum Light Mast

The LM-VLD-FMIDC-18-7-4S-ALU from Larson Electronics is a Light Duty Fixed Mount 4-Stage Light Mast that provides a safe and effective way for operators to quickly deploy lights, security cameras and other equipment to elevations up to 18 feet. This light tower, which collapses to 7 feet, features a removable mast head for storing mounted equipment when not in use. The unit features two surface mount brackets for improved stability. This light-duty mast comes with a wide foundational base at the bottom of the pole for support. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS* This telescoping four stage aluminum light mast from Larson Electronics is designed to allow operators to quickly and safely deploy lighting, cameras, and other electrical equipment in locations where this equipment must be elevated to heights up to 18` for effective coverage. This light boom can be extended to for maximum area coverage and collapsed to 7` for applications where a smaller footprint is required. The tower is constructed of square aluminum tubing with a base stage 66" in length and 4" x 4" x 1/8", second stage 69.75" in length and 3" x 3" x 1/8", third stage 73.5" in length and 2" x 2" x 1/8", and a fourth stage 78.5" in length and 1" x 1" x 1/8". Each section has a 2` minimum overlap. The mast is elevated by pressing down on the end of base stage, elevating the mast into the upright position. The mast is extended to its full height using an included 1,000 lb hand winch with 3/16" galvanized cable. Mounting: The LM-VLD-FMIDC-18-7-4S-ALU is equipped with a wide base at the bottom of the mast for robust support. This feature utilizes a wide foundational base at the bottom of the pole with two bolts at every corner (total of 8). A total of four vertical right-angle plates, located at every side of the square pole, provides additional support for the foundational base, ensuring it does not warp or bend. The LM series of towers are powder coated with glossy blue finish for corrosion resistances and aesthetics. A 1.5" x 1.5" x 1/8" T-head mounting plate is attached to the upper section of the mast which provides a strong and stable platform for equipment. The LM family of telescoping towers feature a proprietary mast guidance system, which provides increased stability during high winds. When lowered to 7`, the mast can withstand winds up to 75 mph. This light duty aluminum light tower weighs approximately 105 lb and can easily support and lift 25 lb fixtures. The entire tower assembly is shipped via common freight carrier and when shipped measures approximately 8` long, 4` wide, 5` tall and weighs approximately 375 lb. Larson Electronics can custom tailor these units to the customer`s requirements with longer sections and larger mounting plates. We also offer a choice of either the manual 1,000 lb hand winch included standard or optional electric winch. Removable Mast Head 12 Ft Mast Extended 1,000 lb Hand Winch Suggested Applications: Temporary lighting, construction sites, and security camera deployment. We can equip this mast with 1000W or 1500W Metal Halide lights or a wide variety of high powered LED lights with comparable power, including the LED10WSA-160, LEDLB-200X2E , LEDLB-160X2E or LEDLB-80x2E. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information LM-VLD-FMIDC-18-7-4S-ALU Four Stage Telescoping Light Tower Quick Summary Mast Type: Vertical Telescoping, Fixed Wall Mount 7` to 18` Light Mast Weight Capacity Class: 25 lb (Very Light Duty) Aluminum Construction Weight: 105 lb Powder Coated Finish Height (Mast Extended): 18`H Removable Mast Head Height (Mast Collapsed): 7`H 75 mph Wind Resistance Base Footprint: - Manual or Optional Electric Operation Footprint (Storage): N/A Payload Capacity: 25 lb Mast Head: 1.5" x 1.5" x 1/8" T-Head Stages: 6 Top Stage Size: 1" x 1" Base Stage Size: 5" x 5" Operation: Mechanical, Manual Hand Crank Winch: (1) 1,000 lb Winch Mast Material: Aluminum Hardware Materials: Delrin, Zinc Plated Steel Finish: Powder Coated - Gloss Blue Cable: 3/16" Galvanized Aircraft Cable Special Orders- Requirements Mounting: Fixed Mount Bracket Contact us for special requirements Anchor Bolts: (8) Bolts Phone: 1-214-616-6180 Shipping: Common Freight Toll Free: 888-325-4448 Shipping Dimensions: 8`-L x 4`-W x 5`-H Fax: 1-903-498-3364 Shipping Weight: +-375 lb E-mail: [email protected]