Larson Electronics Roof Mount HID Spotlight with Manual Handle Control

Dimensions:10.25 inches of post, measuring from the center of the lamp to the center of the handle. 4.75 inches of post are exposed (2.75 inches are inside the lamp head and 2.75 inches are inside the handle attachment). 2 3/4" roof clearance (measured from top of roof surface to bottom of headliner).Roof mount light comes complete with `O` ring for a leak-proof design, universal mounting bracket, installation template, and installation instructions. Operation: Operator controls rotation and elevation of spotlight outside of vehicle by twisting and turning a handle on the inside of the vehicle. Operator remains protected from the elements and can position the beam quickly and easily. The beam remains where the operator places it until the handle is moved. Twisting the handle moves lamp head up and down, while turning rotates the light. On/off switch located just above the rubberized handle for easy access with the thumb. Click Photo to Enlarge Click Photo to Enlarge Format: 6 inch round spun steel housing with triple plate chrome finish. Shaft: Stainless steel with triple plate chrome coating Handle: Black rubberized handle Switch: Thumb activated toggle on the top rear of the handle Voltage: 12 Volt, 35 Watt configuration. Check accessories for 24 volt availability. Lens Type: Sealed beam – glass lens Beam Type: Spot beam Beam Length: 2800 feet projection with 3200 lumens Bulb Type: 35 Watt HID (High Intensity Discharge lamp) Candlepower:Industrial candlepower – 1,200,000Retail Candlepower: 15 million Electrical: Single positive lead from handle connects to vehicle power. Spotlight is grounded via mounting kit to vehicle chassis. Separated connection stems from back of the housing to separate ballast unit. Ballast is mounted separately. Amp draw: 14 amps to start for 60 seconds. Continuous operation is 3 amps on 12 volts.