Larson Electronics *RENTAL* Hazardous Location Signal Light w/ Audible Alarm - Class 1 Div 2 - 4 Colors Avail

Made in the USA *THIS UNIT IS FOR RENTALS* The RNT-HAL-TL-1X10W-C-PA Class 1 Division 2 LED Signal Stack Light with Audible Horn from Larson Electronics is approved for use in hazardous environments where explosive and flammable gases, vapors, and dusts stand a potential to exist, as well as wet locations and marine environments. This vapor proof signal stack light light is designed for routing traffic in industrial refueling stations and processing status indications in manufacturing facilities. The RNT-HAL-TL-1X10W-C-PA hazardous location signal stack LED light with audible horn an signal/traffic light that offers one 10 watt LED lamp in red, amber, blue, green or white light output, other custom configurations available upon request. This unit is rated for Class 1 Division 2 and Class 2 Division 2 work environments, T2D temperature rated, weatherproof/dust-proof, and NEMA 4X and marine rated for wet environments. These indicator lights have 50,000 hours of operational life and the unit works on 120/240 volts AC or 24 volts DC configurations for standard or low voltage operation. This hazardous area fixture is configured ready burn, strobe, or ready burn and strobe combination and each LED lamp offers exceptional 1050 lumen output each. The explosion proof audible alarm setup sounds a unique tone per the user setting. Multiple units can be configured for different lamp colors and different tones, providing operators in hazardous locations with an effective and powerful alert/signal system that can withstand demanding conditions and be heard over the operation of industrial machinery and equipment. A NEMA 4X rated explosion proof junction box protects the internal wiring and can be tapped in order to connect this stack light to power sources. This explosion proof signal light is durable, can operate in any weather condition, and is rated for Class 1 Division 2, Groups C and D and Class 2 Division 2, Group F areas where flammable gas and dust have potential to exist. The 10 watt lamp in this hazardous location stack light provides high output in visible signal colored LED lamp, with a lifespan of 50,000 hours, is protected by durable heat treated glass globes and globe guards for added durability, and offer cool operation and clean, bright output surpassing that of 100 Watt incandescent indicator lamps. The LED lamp is colored LEDs instead of colored globes, providing more light output. We offer strobe or steady burn lamps for this fixture. The light housing is constructed of a non-metallic polymer that is chemical resistant and flame retardant while the horn is made of fiberglass. This stack light is equipped an explosion proof horn. Attached to the far end of the fixture, this audible horn provides operators with up to 5 different tones that can reach a peak output of 110dBA, powerful enough to be heard over industrial operations. There is no dimming or volume control for the lights or horns. Wiring is through a 3/4" NPT conduit access hub. The unit can be ordered in 120V or 240V AC configuration for use with standard line voltages or 24V DC for low voltage use. Mounting is provided by a heavy gauge aluminum base with predrilled holes designed to be bolted to walls and flat surfaces for permanent and secure attachment. Power is provided by individual conductors to allow independent operation of each lamp and tone combination. Operators can tap the C1D1 junction box in order to connect to a power source. This 20 Watt dual lamp hazardous location signal stack LED light with alarm system is an ideal fixture indicator for manufacturing facilities, routing shipping lanes, and any hazardous work area where status indicators and audible alarms are necessary. Note on Lights: Please note, the color choices and light configuration of this unit can be customized to your requirements. We offer steady burn or strobing LED lamps, as well as high or low voltage configurations. Please contact us for special color configurations. Specifications / Additional Information RNT-HAL-TL-1X10W-C-PA Signal Stack Light w/ Alarm Ratings/Approval Lamp Type: LED United States & Canada Colors: Red &Amber, Green & Blue (Custom Configurations Available) Class I, Division 2 Groups C and D Watts: 10 Watt Lamp Class II, Division 2 Group F Voltage: 120/240 Volts AC or 24V DC Class III Lighting Configuration: Steady Burn, Strobe, Custom UL 1598 / UL 1598A Mounting: Ceiling, Wall, Flat Surface T2D Temperature Rating Temp Rating: T3 NEMA 4X rated Wiring: 3/4" Hub - Flying Leads New York City Department of Buildings approved Lamp Life: 50,000+ Hours Mounting: Predrilled Aluminum Base Special Orders- Requirements Rental Type: Monthly, Weekly, Daily Contact us for special requirements Toll Free: 888-325-4448 Fax: 1-903-498-3364 E-mail: [email protected] Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363 for further information if required. Rental Prices for the RNT-HAL-TL-1X10W-C-PA;;Monthly...$1242.00 USD Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive cleaning, if needed. Scroll Down to Purchase