Image coming soon

Larson Electronics Hazardous Location Signal Light w/ Audible Alarm - C1D2/C2D2 - Control Module - NEMA 4X

(No reviews yet) Write a Review
0.00 LBS
Calculated at Checkout
Adding to cart… The item has been added
The HAL-TL-1X10W-C-PA-MOD2 Class 1 Division 2 LED Signal Stack Light with Audible Horn from Larson Electronics is approved for use in hazardous environments where explosive and flammable gases, vapors, and dusts stand a potential to exist, as well as wet locations and marine environments. Equipped with an analog input/output control module, this vapor proof signal stack light light is designed for routing traffic in industrial refueling stations and processing status indications in manufacturing facilities. The HAL-TL-1X10W-C-PA-MOD2 is a hazardous location signal stack LED light with audible horn and signal/traffic light that offers one 10 watt LED lamp in red, amber, blue, green or white light output (other custom configurations available upon request). This unit is rated for Class 1 Division 2 and Class 2 Division 2 work environments, T2D temperature rated, weatherproof/dust-proof, and NEMA 4X and marine rated for wet environments. These indicator lights have 50,000 hours of operational life and the unit works on 120/240 volts AC or 24 volts DC configurations for standard or low voltage operation. The HAL-TL-1X10W-C-PA-MOD2 -MOD2 is equipped with a control module, which enables connection to remote alarms. During use, a customer-provided 24V power supply and up to 4 sensor control wires are connected to the analog input/output unit, allowing the explosion proof signal stack light and horn to be activated via an alarm trigger. Stack Light: The 10 watt lamp in this hazardous location stack light provides high output in visible signal colored LED lamp, with a lifespan of 50,000 hours, is protected by durable heat treated glass globes and globe guards for added durability, and offer cool operation and clean, bright output surpassing that of 100 Watt incandescent indicator lamps. The LED lamp is colored LEDs instead of colored globes, providing more light output. We offer strobe or steady burn lamps for this fixture. The light housing is constructed of a non-metallic polymer that is chemical resistant and flame retardant while the horn is made of fiberglass. This hazardous area fixture is configured ready burn, strobe, or ready burn and strobe combination and each LED lamp offers exceptional 1050 lumen output each. Horn: This stack light is equipped an explosion proof horn. Attached to the far end of the fixture, this audible horn provides operators with up to 5 different tones that can reach a peak output of 110dBA, powerful enough to be heard over industrial operations. There is no dimming or volume control for the lights or horns. The explosion proof audible alarm setup sounds a unique tone per the user setting. Multiple units can be configured for different lamp colors and different tones, providing operators in hazardous locations with an effective and powerful alert/signal system that can withstand demanding conditions and be heard over the operation of industrial machinery and equipment. A NEMA 4X rated explosion proof junction box protects the internal wiring and can be tapped in order to connect this stack light to power sources. Wiring/Mounting: Wiring is through a 3/4" NPT conduit access hub. The unit can be ordered in 120V or 240V AC configuration for use with standard line voltages or 24V DC for low voltage use. Mounting is provided by a heavy gauge aluminum base with predrilled holes designed to be bolted to walls and flat surfaces for permanent and secure attachment. Power is provided by individual conductors to allow independent operation of each lamp and tone combination. Operators can tap the C1D1 junction box in order to connect to a power source. Note on Lights: Please note, the color choices and light configuration of this unit can be customized to your requirements. We offer steady burn or strobing LED lamps, as well as high or low voltage configurations. Please contact us for special color configurations. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information HAL-TL-1X10W-C-PA-MOD2 Signal Stack Light w/ Alarm Ratings/Approval Lamp Type: LED United States & Canada Dimensions: - Class I, Division 2 Groups C, D Weight: - Class II, Division 2 Group F Voltage: 120/240 Volts AC or 24V DC Class III Watts: 10W Lamp UL 1598 / UL 1598A Lamp Life: 50,000+ Hours T2D Temperature Rating Colors: Red &Amber, Green & Blue (Custom Configurations Available) NEMA 4X Rated Lighting Configuration: Steady Burn, Strobe, Custom New York City Department of Buildings approved Temp Rating: T3 Materials: Non-metallic Polymer, Fiber Glass Special Orders- Requirements Mounting: Ceiling, Wall, Flat Surface via Predrilled Aluminum Base Contact us for special requirements Wiring: 3/4" Hub - Flying Leads Phone: 1-214-616-6180 Control Module: Analog Input/Output - 24V Toll Free: 888-325-4448 Fax: 1-903-498-3364 E-mail: [email protected] Scroll Down to Purchase