Larson Electronics *RENTAL* Explosion Proof LED String Lights - 10 lights - Daisy Chain End-2-End Connection - 100ft

Made in the USA *THIS UNIT IS FOR RENTALS* The Larson Electronics RNT-EPL-SL-10-LED-E2E Explosion Proof String Light set is UL Listed Class 1 Division 1 Groups C and D and is ideal for general close work and inspection activities in hazardous locations requiring explosion proof protection. Click here to see the Incandescent version of this lightThis explosion proof string light set from Larson Electronics contains a total of ten 10 watt work lights equipped with aluminum hooks and connected in series along 100 feet of 14/3 SOOW explosion proof cord. A molded T junction is mounted every ten feet, with 3 feet of 16/3 SOOW cord connecting a single drop light to the backbone. The cord on this unit is terminated with a 20 amp 5-20 or 6-20 Class 1, Division 1 explosion proof plug for complete protection. With this arrangement, each drop light cannot spark if pulled apart or dragged. An 25 foot tail section of main SOOW cord is included to allow ample length for connection to power sources. An explosion proof outlet at the end of the backbone provides the ability to conenct multiple units end to end, allowing operators to daisy chain multiple stringers together along the jobsite. 100FT of 14/3 SOOW Explosion Proof Cord Click Photo`s to Enlarge Explosion Proof Daisy Chain Outlet 100 Watt Incandescent Bulb Molded T Connector w/ Hook Ring With the RNT-EPL-SL-10-LED-E2E Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting. This unit incorporates ten explosion proof LED hand lamps connected in series and is suitable for use in areas where petrochemical vapors and various dusts are present. The machined aluminum housings, cast aluminum guard, tempered glass lamp globe, and abrasion resistant cord make this a very durable unit that will resist damage from chemicals, abrasion, vibrations and impacts. This string lighting solution will provide the lighting you require in a flexible, easy to manage configuration. The hand lamps can be moved around and hooked to different points on your scaffold. The lights, however must remain within 10 feet of one other. Each molded T section contains a hook eyelet, allowing operators to suspend the entire backbone off the ground and out of the work space. This explosion proof string light is equipped with an explosion proof outlet 5` from the last junction point, allowing operators to connect multiple units together end to end. Operators can daisy chain up to 10 units end to end in 120 volt or 20 units in 240 volt configurations. Up to three units in 24 volt AC/DC can be connected end to end. Stringer Energy Consumption Comparison Incandescent CFL LED Wattage 1000 watts 260 watts 100 watts Amp Draw @ 120V AC 8.34 amps 2.17 amps 0.84 amps Amp Draw @ 277V AC 3.61 amps 0.94 amps 0.36 amps Amp Draw @ 12V DC 83.34 amps 21.67 amps 8.34 amps Amp Draw @ 24V DC 41.67 amps 10.84 amps 4.17 amps Lamp Life Expectancy 1,500 hours 8,000 hours 50,000 hours Color Temperature 2800K 4300K 6000K Operation cost per year(8hs/day @ 11c/kWh) $321.2 $83.52 $32.12 This stringer light set is Class 1, Division 1 rated for Groups C and D and Class II, Division 1 Groups F and G. This unit is multi-voltage and configured to operate on 120-277V AC or 12-24V DC, please choose your configuration below. Made in USA Quality Lamp Features 1. Federal Spec Cord.2. Explosion Proof.3. Total of (10) 10 watt LED Lamps.4. Non-sparking aluminum construction.5. UL Class 1 Div 1 Class 2 Div17. 120-277V AC or 12-24V DC Operation8. SOOW cable.9. Aluminum Hooks for Convenient Placement.10. Daisy Chain Connections. 100 watts of LED illuminationNon-sparking aluminum housingsLight weight mold T JuctionsCast aluminum guard prevent lamp or globe damageTemptered Soda-Lime Glass Lamp GlobeIntegrated lamp shock absorbers prevent drop damageSwivel hook for hanging and hands free operation14/3 SOOW Abrasion Resistant Cable Specifications / Additional Information RNT-EPL-SL-10-LED-E2E U.L. Ratings UL Listing: United States Class 1, Divisions 1 & 2, Groups C, D Dimensions- Each Lamp: L-16.5" Diam-5" Class 2, Divisions 1 & 2, Groups, F, G Total Watts: 100 Class 1, Zone 1, Group IIB Single Lamp Watt: 10 watts NEMA 4X Voltage: 120-277V AC or 12-24V DC Amps: 0.84 120V AC Mounting: Handheld / Hanging via Aluminum Hooks Wiring: 100` 14/3 SOOW Cable - 20A EXP Plug - EXP Outlet Total Length: 125` Special Orders- Requirements Single Lamp Weight: 6 lbs Contact us for special requirements Total Weight: 70 lbs Toll Free: 888-325-4448 Rental Type: Monthly, Weekly, Daily YOU CAN RENT THIS UNIT. CONTACT 888-325-4448. E-mail: [email protected] Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363 for further information if required. Rental Prices for the RNT-EPL-SL-10-LED-E2E;Monthly...$624.05 USD Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive cleaning, if needed.