Larson Electronics *RENTAL* 1500 Watt Explosion Proof LED String Light - 10 150W Lights Daisy Chained at 50' I-Beam

Made in the USA This unit is for Rentals The Larson Electronics RNT-EPL-SL-10-50X-150LED-RT-IBC Explosion Proof 1500 watt LED String Light set is approved Class I, Divisions 1 & 2, Groups C and D and Class II, Divisions 1 & 2, Groups E, F, and G and is ideal for inspection activities and temporary illumination in hazardous locations requiring explosion proof protection. This daisy chain temporary lighting system provides 175,000 lumens and comes equipped with individual I-beam mounting brackets per light head, allowing for flexibility within the job site. This explosion proof string light set from Larson Electronics contains a total of ten 150 watt work lights equipped with I-beam mount clamps and connected in series along 500` of 10/3 SOOW cable. The 150 watt LED lights are evenly spaced at 50 foot apart along the 500` feet backbone and junction together with 50` of cable between each light. Each light has a 3-foot whip back to the main backbone. The cord on this unit is terminated with a 6-20 Class 1, Division 1 explosion proof plug for complete protection. With this arrangement, each drop light cannot spark if pulled apart or dragged. A 50` foot tail section of main SOOW cord is included to allow ample length for connection to power sources. Each explosion proof light fixture provides 17,500 of high quality light while drawing only 150 watts, for a combined 175,000 lumens and 1,500 watts. These lights are direct replacement for 400 watt metal halide temporary fixtures. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps these fixtures to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier traditional fixtures and requires less hardware to install. This unit incorporates ten explosion proof 150 watt LED lamps connected in series and is suitable for use in areas where petrochemical vapors and various dusts are present. The cast aluminum housings, tempered glass lens, and abrasion resistant cord make this a very durable unit that will resist damage from chemicals, abrasion, vibrations and impacts. This string lighting solution will provide the lighting you require in a flexible, easy to manage configuration for job site illumination. The lamps can be moved around and mounted to different points within the work area. The lights, however must remain within 20 feet of one other. Each explosion proof LED light features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twelve individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate. Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting. This stringer light set is Class I, Division 1 & 2 rated for Groups C and D and Class II, Division 1 Groups E, F, and G. This light is universal voltage capable and can be operated with 220-240VAC, 50/60Hz. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics. Stringer Energy Consumption Comparison 400W Metal Halide 150W LED Wattage 4,600* watts 1,500 watts Amp Draw @ 240V AC 19.17 amps 6.25 amps Lamp Life Expectancy 18,000** hours 50,000+ hours Color Temperature 4100K 6000K Operation cost per day (12hs/day @ 12c/kWh) $6.63 $2.16 Operation cost per month (12hs/day @ 12c/kWh) $198.72 $64.80 Operation cost per year(12hs/day @ 12c/kWh) $2,417.76 $788.40 *Wattage includes ballast factor to include electricity consumed by metal halide ballast. **Estimated lamp life does not reflect accidental damage or premature failures due to portable applications. LED lamps do not suffer from the same physical downfalls that glass bulbs are susceptible of during temporary lighting. Made in USA Quality Lamp Features 1. Federal Spec 600V Cord2. Explosion Proof - Rated for US and Canada3. Total of (10) 150 watt LED Lamps.4. Non-sparking aluminum construction.5. Class 1 Div 1&2 and Class 2 Div 1&27. 220-240V AC8. 10/3 SOOW cable.9. Aluminum Hooks for Convenient Placement. 1,500 watts of LED illuminationNon-sparking aluminum housingsCast aluminum HousingTempered Soda-Lime Glass LensIntegrated lamp shock absorbers prevent drop damageSwivel hook for hanging and hands free operation10/3 SOOW Abrasion Resistant Cable Specifications / Additional Information RNT-EPL-SL-10-50X-150LED-RT-IBC I-Beam Mount Stringer Ratings/Approvals Listing: United States & Canada Class 1 Divisions 1 & 2, Groups C and D Lamp Type: LED Class 2, Divisions 1 & 2, Groups E,F,G Dimensions: 14"H x 16"W 5"D (per lamp head) T5 Temperature Rating Total Watts: 1,500 Certified to UL844 and C22.2 Standards Single Lamp Watt: 150 watts Paint Spray Booth Approved Total Lumens: 175,000 LEL Approved Single Lamp Lumens: 17,500 IP67 Rated Waterproof Color Temp: 5600K Multiple Driver Banks Color Rendering Index: >75 CRI 80% Lumen Retention after 50,000 Hours Lighting Configuration: 60¡ Flood or 125¡ Wide Flood 125,000 Lumens Total Illumination Lamp Life: 60,000+ Hours Temporary I-Beam Mounting System Voltage: 220-240 Volts AC, 50/60Hz Amps: 6.25A @ 240V Mounting: Temporary I-Beam Clamps - (1) Per Fixture Total Weight: ~425 lbs. Single Lamp Weight: 35 lbs. Special Orders- Requirements Temp Rating: T5 -40¡C to +65¡C Contact us for special requirements Wiring: 10/3 SOOW Cable - 50` between lamps, 50` whip Toll Free: 888-325-4448 Cord Cap: C1D1 6-20P Intl: 1-214-616-6180 Total Length: 500` Fax: 1-903-498-3364 Rental Type: Monthly, Weekly, Daily E-mail: [email protected] Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363 for further information if required. Rental Prices for the RNT-EPL-SL-10-50X-150LED-RT-IBC;;Monthly...$2310.10 USD Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive cleaning, if needed.