Larson Electronics *RENTAL* Explosion Proof 300 Foot SOOW Extension Cord - 20 Amp Continuous Service

Made in the USA *This unit is for rental* The Larson Electronics RNT-EPEXC-300-20A-12-3 300` Explosion Proof extension cord allows operators to safely extend the range of their explosion proof light or equipment cords beyond the boundaries of the hazardous work area. These units are constructed of 300 feet of 12/3 SOOW explosion proof cord rated at 20 amps of continuous service. The cord is chemical and abrasion resistant and comes with an explosion proof receptacle installed on one end and an explosion proof plug installed on the other end. We also include an extra matching plug for operators to attach to their equipment which allows them to avoid any issues with plug and receptacle equipment compatibility with this cord. The plugs on these units are of a twist lock design. In order for a secure and working connection to take place, the operator must insert the plug and twist until it locks into place. This ensures a safe seal is made before any sparks from electrical contact can take place. To ensure the highest safety, operators should make connections outside of the hazardous area. We offer this unit in a 125V or 250V configuration. Each receptacle`s contacts are deep recessed to avoid accidental contact and will accept standard non explosion proof plugs that are NEMA 5-20R, or 6-20R compatible although explosion proof plugs must be used to preserve explosion proof approval in hazardous environments. Ordinary location plugs will NOT activate this cord`s explosion proof receptacles. Click Photos to Enlarge These explosion proof extension cords are preconfigured in 125V (left) or 250V (right). Each unit is equipped with a 20 amp explosion proof cord cap and rated for 20 amps of continual service. The outlets are a twistlock design. The deep recessed contacts in the receptacle housing prevents ordinary and wet location plugs from activating the explosion proof outlets. 125V 5-20P Explosion Proof Straight Blade Plug 250V 6-20P Explosion Proof Straight Blade Plug 125V 5-15/20 Explosion Proof Outlet Outlet accepts 15A and 20A Explosion Proof Plugs Outlet accepts 6-15P and 6-20P Explosion Proof Plugs Inter-Compatibility: The plugs on these cords will work with non-explosion proof standard receptacles (NEMA 5-20R, 5-20R, or 6-20R) and standard wall outlets, however, they must be used with explosion proof rated outlets to retain their explosion proof rating. The included plugs and receptacle are cross-interchangeable with Crouse Hind™ part# ENPENP5201 plugs and receptacles and Hubble-Killiark part# UGP-20231 ACCEPTOR¨ plugs and receptacles. Any equipment requiring these C-H or H-B plugs should work with these cords. Due to possible manufacturer changes we cannot guarantee interchangeability although we have made every effort to ensure cross compatibility correctness. Suggested Applications: Manufacturing, Industrial, Warehouse, Lighting, Explosion Proof Light Fixtures, Grinders, Wet areas or Locations Where Combustible Dust is Present. Specifications / Additional Information RNT-EPEXC-300-20A-12-3 Explosion Proof Extension Cord Plug / Outlet Certifications Amp Rating: 20 amp Continuous Service Class 1 Div 1 Groups C and D Dimensions: Cord length-100 Feet Plug-2.78"-L 1.75"-W Class 2 Div 1 Groups F and G Configuration: 3 Pole 2 Wire Suitable Plug Cable Diameter: .538" to .639" Wiring: 300` 12/3 SOOW Cable Terminated w/ (1) 5-15P Explosion Proof Straight Blade Plug and (1) 20 Amp Receptacle Voltage: 125 Volts or 250 Volts Receptacle Specs: 1 Inline Receptacle Configuration:3 Pole 2 Wire Materials: Copper Free Aluminum Dimensions: 3"-W X 5.69"-D X6.13"-H Special Orders- Requirements Mating Plugs: **** EPP-15A, EPP-20-A **** Contact us for special requirements Finish:Epoxy Powder Coat Toll Free: 888-325-4448 Rental Type: Monthly, Weekly, Daily U.L. Certification E-mail: [email protected] Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363 for further information if required. Rental Prices for the RNT-EPEXC-300-20A-12-3;;Monthly...$172.32 USDWeekly...$114.88 USD Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive cleaning, if needed.