Larson Electronics *RENTAL* Class 1 Division 2 Fluorescent Light - 4 foot 2 lamp - UV bulbs - 8 foot cord - *RENTAL*

Larson Electronics

(No reviews yet) Write a Review
SKU:
RNT-HAL-48-2L-UV-8
Weight:
0.00 LBS
Call for price
Made in the USAThe Larson Electronics RNT-Hal-48-2L-UV-8 Hazardous Location UV Fluorescent Light Fixture is U.S./Canada UL Listed Class 1 Division 2 . This fixture uses a special ballast and bulb combination to produce ultraviolet light. This lamp is T4C rated and ideal for hazardous locations where UV lamps are used to cure coatings and adhesives or as germicidal agents. This unit is for rental contracts. The RNT-Hal-48-2L-UV-8 fixture is a 4 foot long, 2 lamp, UL listed Class 1 Division 2 hazardous location fluorescent light that emits light in the ultraviolet spectrum. The RNT-Hal-48-2L-UV-8 can be configured to produce UVA or UVC light which is typically used for curing coatings or adhesives, pest management or in germicidal applications. The lamps are protected by an aluminum framed hinged glass door secured with four turn latches and the fixture is constructed of copper free aluminum alloy. The lamp reflector is corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This fixture, like our other UV lights operates on 120 VAC only. The RNT-HAL-48-2L-UV-8 is equipped with an 8 foot cord and provides operators in hazardous locations with a reliable and durable UV lighting solution for open areas where flammable chemicals and vapors may occasionally be present. Ultraviolet Wavelength Options: Ultraviolet A Wavelength produces a longer wave between the 400nm - 315nm spectrum.Ultraviolet C wavelength is reduced exceptionally. Some refer to this wave as the `germicidal` wave. The Ultraviolet C Wavelength ranges from 280nm - 100nm. Standard Surface Mount Brackets: Each L bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. Mounting brackets are removable. A single through hole enables the operator to install the light to any surface. A sliding bracket mount is available so operators can retrofit this LED light fixture to use the pre-existing mounting holes from other fluorescent fixtures. The sliding mount brackets are available in the related items order section below.. Suggested Applications: Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Gas processing plants, Chemical manufacturing, Waste treatment plants, Gas processing plants. Made in USA Quality Lamp Options 1. Each unit dialectically tested.2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture, where other models may only offer one or three choices.3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.4. Relamping done via 4 turn latches, which enable the operator to unlatch the hinged door and access the lamps.5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.6. 3/4 inch, threaded access hole for wiring conduit. 7. Units are capable of being wired end to end in series. Lamp options for UV fixtures are determined by UV range. Operators can specify when ordering- UVA (-A part number suffix), and UVC (-C suffix).T8 bulbs designed for UV applications are used. The bulb and ballast in our UV fluorescent fixtures are unique to UV applications.UVA(-A) 400nm - 315nmUVC (-C) 280nm - 100nm Specifications / Additional Information RNT-HAL-48-2L-UV-8 Hazardous Location Ultraviolet U.L. Ratings UL Listing: United States - Canada Class 1 Division 2, Groups A,B,C,D Dimensions: W-7" L-49 3/4" H-6 1/8 " UL 595 Outdoor Marine Type (Saltwater) Weight: 33Lbs UL 1598 Marine Type Total Watts: N/A* NTRL Listing- U.S/ Canada Standards Voltage: 120V-60hz Total Lumens: T8 UV Bulbs N/A Lamp Life Expectancy: T8 UV Bulbs N/A Efficiency: T8 UV Bulbs N/A Operating Temp Range: T4C Rated Beam Angle: N/A Special Orders- Requirements Color: Ultraviolet- 400nm-315nm, 280nm-100nm Contact us for special requirements Mounting: Bracket Standard Sliding Bracket Optional Toll Free: 888-325-4448 Wiring: 8 Foot Cord Rental Type: Monthly, Weekly, Daily E-mail: [email protected] U.L Approval: U.S Certificate Canada Certificate Made in the USA *Wattage totals vary with different lamp options. Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like orders until the product is returned. This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us Toll Free: at 888-325-4448 or (903) 498-3363 for further information if required. Rental prices for the HAL-48-2L-UV-8-REN;Monthly...290.00 USDWeekly...193.33 USD Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Deductions will also be made for shipping, repairs, and excessive cleaning, if needed. Scroll Down to Order

Reviews