Larson Electronics *RENTAL* 30' Portable Solar Tower w/ IP Camera - Backup Genset, LED Strobe, Wireless Hotspot

Made in the USA This unit is for rentals. The Larson Electronics RNT-SPLT-.53K-LM30-1XPTZ.20X-CL1B.B-ISGG-TLR10-W4G Portable Solar Surveillance Tower w/ IP Camera provides a safe and effective way for operators to monitor locations from elevated positions between 13.5` to 30`. This solar security assembly features a telescoping tower that folds over for easy transportation, with a rotating boom that allows 360¡ rotation and a removable mast head for storage when not in use. A full-HD security camera can be used to record images, which is supported by a blue LED strobe lamp that acts as a deterrent. Operators may store footage via a 1TB NVR. This unit features wireless hotspot capabilities, two 265-watt solar panels, a 500aH capacity battery bank with 250aH being usable and a 120V battery charger for powering the cells when sunlight is unavailable, as well as a 7kW backup generator. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS* The RNT-SPLT-.53K-LM30-1XPTZ.20X-CL1B.B-ISGG-TLR10-W4G is a complete, portable solar-powered surveillance system for outdoor and remote locations. This unit consists of a 13.5`-30` mast, full-HD IP security camera, blue LED strobe fixture, 7kW backup generator and a 1TB NVR. All components are mounted on a single axle trailer. Security Camera: The monitoring device provides operators with crisp 1080p full-HD high resolution images. A 4.7-94mm varifocal lens automatically adjusts focus, providing operators with precise 20x optical zoom levels. Integrated long-range IR LEDs, with a wavelength measurement of 850 nm, enable the day/night camera to see distances up to 492` under nighttime conditions. This unit offloads videos in MP4 format and features H.264 and MJPEG video compression. The IP security camera is designed to perform in outdoor locations and rainy conditions. This IP66-rated unit resists the negative effects of non-corrosive liquids. De-fogging features enable the unit to operate in rainy and foggy conditions. This device is capable of operating in temperatures between -22¡F and 149¡F. This solar security assembly comes with a 1TB, 8-channel network video recorder. Installation only takes minutes via plug-and-play, which automatically detects, displays and configures system components. With multiple recording modes (Schedule, Continuous, Motion Detection and Event), users could capture hours of footage with ease. The remote configurable network recorder features a bit rate of 40Mbps incoming and 80Mbps outgoing at up to 60fps per channel. To maximize storage, the unit supports H.265, H.264, and H.264 OVC video compression. The network recorder is compatible with two-way audio streaming (camera dependent) and includes 9 ethernet ports (RJ-45 interface). During recording, the unit handles the following data: activity log, email notification, event log, event notification, video analytics and event search. This device offloads videos in MP4 format. Router/Wireless 4G Hotspot: Operators can connect to the provided Verizon 4G internet via a professional-grade router. The unit supports dual-band 2.4 GHz (450 Mbps) and 5 GHz (1,300 Mbps), as well as 3x3 MIMO. Stateful firewall and DoS prevention ensures secure network usage during operation. Settings and configurations are controlled via a cloud-based smartphone app or web-based computer program. An external antenna is available for signal boosting and extending hotspot coverage. The antenna measures 12` and offers compatibility with the following frequencies: 690~960 MHz, 1710~2170 MHz and 2500~2700 MHz. NOTE: This rental comes with a monthly service contract for Verizon 4G remote viewing (5GB data limit). Options for duration of service contract include: daily, weekly or monthly. LED Strobe: The RNT-SPLT-.53K-LM30-1XPTZ.20X-CL1B.B-ISGG-TLR10-W4G features a Class 1 blue LED strobe lamp as a deterrent. This compact, high powered LED beacon contains an LED lamp assembly that produces 360¡ of brilliant blue light without the dark spots or unevenness of traditional incandescent beacon lights. This beacon is equipped with auxiliary LEDs on top, helping to make this a Class 1 rated beacon and capable of producing a brilliant flashing pattern that is visible at extended distances. This LED beacon has 30 flash patterns including four simulated rotating patterns that can be changed via a toggle switch from the control box. This waterproof beacon has a black powder coated die cast base that contains a fully potted circuit board. A clear polycarbonate lens protects the LED assembly and the housing is waterproof, shock resistant and built for for reliable and durable operation. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Surveillance Tower: This telescoping five stage steel security mast from Larson Electronics is designed to allow operators to quickly and safely deploy a reliable monitoring system in locations where it must be elevated to heights up to 30` for effective coverage. This security tower can be extended to 30` above the trailer floor for maximum area coverage, and collapsed to 13.5` for applications where a footprint smaller is required.The tower is constructed of square steel tubing with a base section 6.6` in length and 6" by 6" by 3/16" thick, lower section 6.78` `in length and 5" by 5" by 3/16" thick, middle section 6.93` in length and 4" by 4" by 1/8" thick, upper section 7.08` in length and 3" by 3" by 1/8" thick, and top section 7.58` in length and 2" by 2" by 1/8" thick. Each section has a 1`+ overlap. The mast is extended to its full height using an included 1,000lb rated hand winch with 3/16" galvanized steel cable. Junction boxes are mounted at the top of the first stage and at the very top of the mast for equipment setup, connection, and deployment. A 44" wide and 2" by 2" by 1/4" thick mounting plate is attached to the upper section of the mast which provides a strong and stable platform for the equipped IP security camera and LED strobe. A half-moon shaped mounting plate on the top of the mast head provides a secure mounting platform for the NEMA 3R 12" x 12" x 6" junction box, where operators can mount cameras, indicator lights, and route electrical cabling. When elevated to its full upright position, the mast can be rotated a full 360¡. By loosening the T-Handle, operators can rotate the mast with easy in either direction. The mast can be positioned in one of four different positions, and locked back in place by re-tightening the T-handle. The mast itself spins freely with easy, and can typically be rotated with a single hand. The LM series of towers are powder coated with glossy blue finish for corrosion resistances and aesthetics. The LM family of telescoping towers feature a proprietary mast guidance system, which provide increased stability during high winds. Four 1,000 lbs hand crank leveling jacks are used for leveling. The jacks can be leveled by hand crank or attachment provided for power drills. These outriggers can be extended 2` out from the side of the trailer for added stability. When lowered to 13.5`, the mast can withstand winds up to 125 mph. Custom builds can be provided for higher wind speed resistance when fully raised. Solar Panel Assembly: This unit is comprised of two 265-watt solar panels, generating a total maximum output of 0.53 KW. The panels are mounted to a stationary assembly. The panels are wired to the solar charger control box which manages the charging system. The two solar panels are mounted to a frame angled at 45¡ to capture the intensity of the sun for optimized light intake. A 120V battery charger can be used for powering the batteries when sunlight is unavailable. Component Control Center: All the electrical components are encapsulated in a NEMA 3R job box that is bolted to the trailer. Since most of these components are not rated for high heat, our component cooling system circulates air within the job box at 1400 CFM when the ambient temperature exceeds 90 degrees Fahrenheit. The job box that contains the component control system includes locks for security purposes. Backup Generator: This solar security tower features our GPG-9KW-1P-120.240 backup generator. This generator is powered by a 4-stroke OHV single cylinder engine with a forced air cooling system that runs on gas, and is started by pulling the recoil starter, or with the push of a button using the key less electric start. This genset will automatically kick on whenever the voltage of the battery system falls below 12V. This is useful for times when sunlight is not readily available. Trailer Assembly: The entire assembly is mounted to a 10` (trailer length) x 10` (trailer bed) x 14` (tow length), single axle trailer via six 1/2" anchor bolts. The two wheel trailer is equipped with 3,500 lbs axle and leaf springs with 15" trailer tires. A standard 2" ball coupling, two standard safety chains, and 7-pin flat trailer plug allow for easy hookup and towing. The trailer tongue can be folded up for seamless storage. A rugged and waterproof job box is included, safely secured to the trailer. Four outriggers mounted to the corners of the trailer allow operators to level the trailer, and provide stabilization during deployment. All trailer lighting complies with DOT/FMVSS regulations. Applications: Security, monitoring, live events, law enforcement, military, commercial, industrial facilities, outdoor surveillance, remote locations and more. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or message [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information RNT-SPLT-.53K-LM30-1XPTZ.20X-CL1B.B-ISGG-TLR10-W4G Trailer Mounted Solar Security Mast Quick Summary Mast Specs 13.5` to 30` Solar Surveillance Tower Tower Length: 13.5` to 30` Steel Construction Mast Head Length: 44" Powder Coated Finish Materials: Steel Removable Mast Head Finish: Powder Coated - Gloss Blue (4) 1,000lb Outriggers Operation: (1) 1,000lbs Hand Winch 125 mph Wind Resistance Mast Cable: 3/16" Galvanized Aircraft Cable Manual or Optional Electric Operation Cable Sheath: Sealtight Coiled Tubing A-Frame for mounted (2) 265 Watt Solar Panels Fully Solar, No Fuel Needed Solar Specs SAEJ845, Class 1 LED Strobe Panels: (2) 265 Watt panels PTZ IP Camera w/ Motion Detection Method of Deployment: Fixed Mount De-fog Viewing (Rain and Fog) System Voltage: 12 Volts 360¡ Rotation, -15¡~90¡ Tilt Battery Bank: (2) 12V 8D 250aH batteries 7kW Backup Generator Battery Capacity: 500aH Total / 250aH Usable 1 TB NVR Battery Charger: Yes, 120V AC Wireless 4G Hotspot Foldable Tongue Backup Generator Specs Dimensions: 26" x 22.4" x 28.4" Weight: 224 lbs Engine: 420CC 15 HP OHV Rated Power: 7,000W Output, 9,000W Peak Fuel Capacity: 6.5 Gal Starting System: Recoil & Electric LED Strobe Specs Lamp Type: LED Strobe (Blue) Dimensions: 4.5" x 6.5" - D Voltage: 12 or 24V DC Watts: 14.4W Lumens: 1,440 Luminous Efficiency: 100 LPW Lighting Configuration: Strobing Flash LED Life Expectancy: 50,000+ Hours Operating Temp Range: -45¡C ~ +55¡C Materials: Polycarbonate Lens Camera Specs Camera Type: Security Camera Dimensions: 14.38" H x 7.12" D Camera Weight: 9 lbs Total Watts: 25.5 (Max) Voltage: 24V AC (PoE - 802.3at) Image Sensor: CMOS Connectors: 1.0Vp-p, 75 Ohm, BNC Effective Pixels: 2.1 MP, 1920 x 1080 Resolultion Min. Illumination: 0.02 Lux @ F1.6 AGC On, 0 Lux w/ IR Electronic Shutter: 1 ~ 1/10,000s Lens: 4.7-94mm Varifocal Lens Angle of View: 58.3¡ (Wide) ~ 3.2¡ (Tele) Optical Zoom: 20x Day/Night: ICR IR Distance: 492` (850 nm) Video Framerate: 1080p @ 30fps Video Offload: MP4 Video Output: (1) BNC Language: English Ambient Temperature Range: -22¡F to 149¡F Housing Materials: Aluminum Lens Material: Polycarbonate Color: Beige/Black Network Video Recorder Specs Storage Capacity: 1 TB SATA Hard Drive Channels: 8 Camera Resolution Support: Up to 8 MP Installation Type: Plug and Play Incoming/Outgoing Bit Rate: : 40 Mbps/80 Mbps Frame Rate (fps): 60 fps per Channel Recording Modes: Continuous, Schedule, Event, Motion Detection and VCA Export Format: MP4 Video Outputs: (1) RCA, (1) VGA, (1) HDMI, (1) USB 2.0 (Front), (1) USB 3.0 (Rear) PoE: = 120W, Supported Standards- 802.3af and 802.3at Alarm Input: 4x (Rear Panel), Camera Dependent Alarm Output: 1x (Rear Panel), Camera Dependent Protocols: IPv4, TCP/IP, UDP, HTTP, UPnP, RTSP/RTP/RTCP, SMTP, FTP, DHCP, NTP, DNS, ONVIF, HTTP Multipart Materials: Aluminum Router/Antenna Specs Router Type: Pepwave Surf SOHO Router WAN Interface: 1x 100/1000M Ethernet Port, 1x USB 2.0 Interface, Wi-Fi as WAN LAN Interface: 4x 100/1000M Ethernet Ports, Simultaneous Dual-Band 11ac Wi-Fi AP Wi-Fi AP Operating Frequency: 2412 - 2472MHz and 5180 - 5825MHz Wi-Fi Data Rates: 3x3 MIMO, 2.4GHz: 450Mbps or 5GHz: 1300Mbps Wi-Fi Antenna: 3x External Wi-Fi Antenna Router Throughput: 120 Mbps Power Input: DC Jack: 10V - 24VDC AC Adapter: AC Input 100V - 240V, DC Output 12V, 3A Power Consumption: 26W (w/ USB WAN), 22W (w/o USB WAN) Dimensions: 9.17` x 5.6` x 1.18` Weight: 0.86 lbs Humidity: 15% - 95% (Non-condensing) External Antenna Frequency: 690~960 MHz, 1710~2170 MHz, 2500~2700 MHz External Antenna Gain: 5dB External Antenna Height: 12` Service Contract Options: Daily, Weekly or Monthly Trailer Specs Materials: Steel Trailer Dimensions: 10`L x 6`W (Trailer Bed) - 14`L (Tow Length) Trailer Footprint (w/ Outriggers Extended): 14.65`L x 12.91`W Wiring: 7-Pin Flat Axle: 3,500lb Suspension: 3,500 Lb 4-Leaf Double Eye Springs Outriggers: (4) 1,000 Manual Crack Leveling Jacks Wheels: (2) 15" 5x4.5 Steel Rims Tires: ST205/75/D15 H188 Hitch: 2" Ball Coupler Special Orders- Requirements Weight: +-1200 lbs Contact us for special requirements Shipping: Common Freight Phone: 1-214-616-6180 Shipping Dimensions: 14`L x 10`W x 12`H Toll Free: 1-800-369-6671 Shipping Weight: +-600 lbs Fax: 1-903-498-3364 Options: Length- Mounting-Fixtures/ Call Us for Special Requirements E-mail: [email protected]