Larson Electronics PTZ Day/Night Thermal Imaging Mobile Camera System - 7" LCD Monitor - Wireless Remote - 12V DC LE-3349

The Larson Electronics LE-3349 PTZ Day/Night Thermal Imaging Mobile Camera System facilitates thermal, daylight and low-light viewing in industrial sites. This low voltage monitoring device offers 360¡ continuous rotation and magnetic mounting on compatible surfaces. The system includes a 7" LCD display, mini power center w/ 12V DC plug, CAT5e cable and remote control.

Camera Features: The LE-3349 Multi-sensor PTZ Thermal Camera offers thermal image viewing in outdoor and industrial locations. This complete thermal monitoring system includes the following components: thermal camera, 7" LCD display, mini power center w/ 12V DC plug, CAT5e cable and remote control. The system operates on 12V DC and consumes 2.2 amps (maximum).

The environmentally sealed camera caters to full, 360¡ continuous rotation and a tilt range of 200¡ (with auto tilt @ azimuth). Equipped with a 1/3" SONY Super HAD CCD II Sensor (960H double speed CCD), calibration modes include: internal, auto and manual. This camera offers digital image stabilization, wide dynamic range, digital noise reduction and automatic gain control. Up to 10x optical/digital zoom is achievable in daylight mode (up to 4x in thermal mode). This camera provides a resolution of 700TVL and NTSC: 976x494; PAL: 976x582 picture elements.

During thermal viewing, the unit can detect human targets at a distance of 1,000m (recognition @ 200m). For vehicle targets, detection is possible at a distance of 2,380m (recognition @ 500m). Thermal core standards include 17um 388 x 284/ 640 x 480 Uncooled Vanadium Oxide (VOx) LWIR. Operators are provided the following thermal palette controls: white hot, black hot and multiple color palettes. This camera is protected by a UV stabilized ABS plastic housing and adheres to MIL STD 810E standards (resistant to shock, vibration, sand and dust).

Wiring: Link-up with the camera is achieved via a RJ45 (Cat5e) cable, which connects to the mini power center with a 12V DC plug as well as facilitates connection with the remote control and LCD display. The Cat5e cable is included with the system.

Mounting: The compact thermal camera features a circular neodymium magnetic mount base for seamless mounting on magnetic surfaces. Tools are not required during setup or removal of the unit. The LCD monitor comes with a stand for secure viewing.

Applications: Thermal monitoring, inspections, NDT, thermal scanning, remote observation, industrial, maintenance, repair and more.