Larson Electronics Power Distribution System - 45KVA transformer - (6) 120V 5-20 GFI & (2) 208Y Outlets - Casters

Made in the USA The Larson Electronics MGS-45KVA-6X120-2X208Y-WC power distribution substation converts 480 VAC three phase electrical current into single phase 120V/208Y AC. This unit provides operators the ability to safely tap into and distribute 480VAC power from a variety of sources including generators and direct grid power. The MGS-45KVA-6X120-2X208Y-WC transformer provides a safe and effective way for operators in industrial settings to tap into and utilize power sources independently of the work area. This unit provides an effective power source for operators performing plant turnarounds, maintenance and cleaning in hazardous areas, equipment installations and repairs and any activities requiring an alternative to native power sources. This unit is designed to operate with 480 three phase which it then transforms to 120 Volt single phase and 208 Wye single phase. This transformer makes 120/208Y readily available via six 5-20 120V GFCI protected 20 amp receptacles and two 208Y L14-30 receptacles. Click Photo to Enlarge Click Photo to Enlarge 20` of #6 Type W cable connects line-in power to a fused ON/OFF disconnect switch which controls current to the 45 KVA, 480 Volt, 3 phase transformer. The transformer and distribution assembly is mounted onto a rugged, powder coated, carbon steel frame with integrated skid pockets, a top located lifting eyelet, and 8" locking casters to allow easy transport. The standard frame is constructed of 3" x 1/4" thick square tubing and powder coated for corrosion resistance. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. This unit is weatherproof and ideal for use in applications including but not limited to, plant maintenance, hazardous location operations, as a welding station, shows and exhibits and marine applications. These units are popularly used in hazardous locations where external power sources are often necessary and work well in combination with explosion proof lights. Larson Electronics is a manufacturer and as such can build transformers to your specifications. Although we carry several models of power distribution systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected]. Specifications / Additional Information MGS-45KVA-6X120-2X208Y-WC Power Transformer Ratings Line In: 480V 3 Phase via 10` #6 Type W Cable UL 1640 Portable Power-Distribution Equipment Disconnect: 60A, fused NEMA 3R Indoor or Outdoor Use Transformer: 45 KVA 480V 3P to 120/208Y - NEMA 3R Made in the USA Load Center: 100 amp main breaker 120 VAC Outlets: (6) 20 amp 5-20 GFCI receptacles w/ waterproof covers 208Y Outlets: (2) L14-30 receptacles w/ waterproof covers Protection: GFCI Outlets, Circuit Breakers Mounting: Carbon Steel Tubular Frame, Powder Coated with locking casters Dimensions: 36"W X 30"D X 56"H Weight: ~350lbs Special Orders- Requirements Features: Contact us for special requirements Max Primary OCP: 54 amps @ 480V Toll Free: 888-325-4448 Max Secondary OCP: 125 amps @ 208Y E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase