Larson Electronics Power Distribution System - 45 kVA - 4 Welding Outlets - 10 X 120V and 2 X 240V Outlets

Made in Texas The Larson Electronics MGS-480.2X30A.2X60A-45K-2X240-10X120 heavy duty power transformer substation converts 480 VAC electrical current to single phase 120V AC and 240V AC. This unit provides operators the ability to safely tap into and distribute 480 volt power from a variety of sources including generators and direct grid power via ten 120 Volt outlets and two 240 Volt outlets. This portable power distribution panel also provides two 30-amp, 480V welding receptacles and two 60-amp, 480V welding receptacles on the primary side. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* The portable power transformer provides a safe and reliable way for operators in industrial settings to tap into and utilize power sources independently of the work area. This unit provides an effective power source for operators performing plant turnarounds, maintenance, equipment installations and repairs and any activities requiring an alternative to native power sources. This portable transformer system is designed to operate with 480 VAC which it then steps down to single phase 120 and 240 VAC. This substation makes 120VAC available via 10 GFCI protected 20 amp receptacles and 240VAC available via two L6-30 240VAC outlets. This portable power distribution system also provides two 30-amp, 480 Volt outlets and two 60-amp, 480 Volt outlets for welding receptacles. Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge This power distribution converts 480 VAC to single phase 120V AC and 240V AC with a 45KVA NEMA 3R transformer. On the primary side, a 250-amp main breaker 480 Volt panel provides protection for the two 30-amp ADR3034 receptacles, two 60-amp ADR 6034 receptacles and the 45KVA transformer. On the secondary side, a 200-amp main breaker panel provides protection for the ten 20-amp, 120 volt, L5-20 outlets and the two 30-amp, 240 volt, L6-30 receptacles. The transformer and distribution assembly is mounted onto a rugged carbon steel frame with integrated skid pockets and a top located lifting eyelet which allows easy transport. The standard frame construction is _ inch thick, 2-inch square tubing frame and 1/4-inch steel plate floor base. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larson Electronics is a manufacturer and as such can build portable power distribution systems to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MGS-480.2X30A.2X60A-45K-2X240-Power Distribution System Ratings Line In: 20’ #6 Type W cable UL 1640 Portable Power-Distribution Equipment Primary: 480 VAC NEMA 3R Indoor or Outdoor Use Secondary: 120VAC - 240VAC Single Phase Made in the USA Primary Panel: 480 Volt, 250-amp main breaker panel with two 30-amp, 480 VAC Welding ADR-3034 receptacles protected by 30-amp breakers, two 60-amp, 480V AC ADR-6034 receptacles protected by 60-amp breakers and a 50-amp breaker protecting transformer 120 VAC Outlets: 10 GFCI Protected Receptacles 240 VAC Outlets: 2 X L6-30 Receptacles Transformer: 45KVA 480-120/240 1P NEMA 3R Secondary Panel: 200-amp main breaker panel with 10X20-amp, 120V breakers protecting 20-amp 5-20 receptacles and 2X30-amp, 240V breakers protecting 30-amp, L6-30 receptacles Transport: Skid pockets and top pick eye Dimensions:48x44x72 Special Orders- Requirements Weight: 827 Contact us for special requirements Options: Locking Casters Toll Free: 888-325-4448 Max Primary OCP: 234 amps @ 480V Max Secondary OCP: 187.5 amps @ 240V E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase