Larson Electronics Power Distribution Panel - (2) 120/240V 1PH 400A MLO - (2) L6-30R (26) L6-30R Duplex Receptacles

Made in the USA The Larson Electronics PDU-240V-800DS-2X400AMLO-MOD1 Power Distribution Panel is designed for reliable, safe and convienient power distribution at industrial work sites. This unit features one 240V 800-amp disconnect and two 120/240V 400-amp panels. The power distribution panel provides operators the ability to safely tap into and distribute 240V AC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* The PDU-240V-800DS-2X400AMLO-MOD1 power distribution panel provides a safe and reliable way for operators in industrial settings to tap into and utilize power sources independently of the work area. The PNL series of power distribution panels require operators to provide their own line-in cables for use. Knockouts are provided for convenient installation of operator provided cables. The floor-mounted panel is designed to operate with 240 volt single phase voltage. Power distribution for this panel runs single phase 240V through an 800-amp 240V single phase disconnect using a customer provided cord. Power is passed to two 400-amp 120/240V single phase main lug only panels, which contains thirteen 30-amp breakers protecting thirteen 30-amp L6-30R 250V receptacles each (total of twenty-six 30-amp breakers and twenty-six L6-30R receptacles), and two 15-amp breakers each (total of four 15-amp breakers). During setup, operators can complete wiring connections between the panels and disconnect. Enclosure Design: This power distribution panel is housed in a space-saving NEMA 3R enclosure for protection against dust, dirt and moisture in indoor and outdoor locations. Constructed of stainless steel, the unit`s slim, rectangular profile is compatible with plug-in mounting configurations. A lockable opening deters the possibility of tampering. Operators can mount the panel on floors and flat surfaces. We also offer similar portable power distribution panels on dolly carts with wheels, powder coated cube frames with lifting eyelets/skid pockets or stand-alone with handles for faster turnarounds and completion of temporary tasks. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is NEMA 3R rated and ideal for indoor/outdoor use and applications including but not limited to; construction sites, plant maintenance, plant turnarounds, hazardous location operations, shows, exhibits, and shipyard operations. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information PDU-240V-800DS-2X400AMLO-MOD1 Power Distribution Panel Ratings Line In: Customer Provided UL 1640 Portable Power-Distribution Equipment Max Primary OCP: 800A @ 240V NEMA 3R Indoor or Outdoor Use Disconnect: 800A 240V 1PH N3R Made in the USA Panels: (2) 400A 120/240V 1PH MLO Panels - N3R Operator Wiring Connections Breakers: (26) 30A (4) 15A Outlets: (26) 30A L6-30R [250V] Materials: Stainless Steel Enclosure Form Factor: Rectangular, Slim-profile Enclosure w/ Lockable Opening Wire Size: AWG 3/0 (Aluminum/Copper) Dimensions: 20.75" x 40.82" x 9.5" Special Orders- Requirements Weight: - Contact us for special requirements Toll Free: 888-325-4448 E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being one-time custom builds. The specifics for this configuration are listed in the specification table and one-line diagram.*All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase