Larson Electronics Portable Solar Trailer Mounted Equipment Tower - 8' to 24' Mast - Job Box/No Solar Panels LM-24-5S-TLR7-JB-M1

Made in the USA

The Larson Electronics LM-24-5S-TLR7-JB-M1 Portable Solar Trailer Mounted Equipment Mast provides a safe and effective way for operators to quickly deploy customer-provided security devices to elevations up to twenty-four feet. This solar mast and trailer features a telescoping tower that folds over for easy transportation, a rotating boom that allows for 360¡ of rotation and a removable mast head for storage when not in use. Solar panels and fans are not included with the system.

*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS*

This telescoping five stage solar equipment mast from Larson Electronics is designed to allow operators to quickly and safely deploy devices in locations where it must be elevated to heights up to 24` for effective coverage. This mast can be extended to 24` above the trailer floor for maximum area coverage, and collapsed to 8` for applications where a smaller footprint is required. The entire assembly is mounted onto a 7` single axle trailer, allowing operators to transport this portable tower from location to location.

Solar panels are not included with this system. A 4"-L x 2'-W x 2'-D job box allows customers to store their equipment. The job box contains mounting provisions for a fan and ventilation shroud (fan not included).

Security Tower: The tower is constructed of square steel tubing with a base section 5.92` in length and 6" by 6" by 3/16" thick, lower section 6.04` in length and 5" by 5" by 3/16" thick, middle section 6.19` in length and 4" by 4" by 1/8" thick, upper section 6.34` in length and 3" by 3" by 1/8" thick, and a top section 6.5` in length and 2" by 2" by 1/8" thick. Each section has a 1` overlap. The mast is elevated using an included 2,500 lbs hand winch with 3/16" cable and extended to its full height using a second 2,500 lbs hand winch.

A 44" wide and 2" by 2" by 1/4" thick mounting plate is attached to the upper section of the mast which provides a strong and stable platform for customers to mount cameras (not included). When elevated to its full upright position, the mast can be rotated a full 360¡. By loosening the T-Handle, operators can rotate the mast with ease in either direction. The mast can be positioned in one of four different positions and locked back in place by re-tightening the T-handle. The mast itself spins freely and can typically be rotated with a single hand. The LM series of towers are powder coated with glossy blue finish for corrosion resistance and aesthetics.

The LM family of telescoping towers feature a proprietary mast guidance system, which provide increased stability during high winds. Four 1,000 lbs hand crank leveling jacks are used for leveling. The jacks can be leveled by hand crank or attachment provided for power drills. These jacks can be extended 2` out from the side of the trailer for added stability. When lowered to 8`, the mast can withstand winds up to 125 mph. Custom builds can be provided for higher wind speed resistance when fully raised.

Trailer Assembly: The entire assembly is mounted to a 7.5` by 7`, single axle trailer via six 1/2" anchor bolts. The two wheel trailer is equipped with 3,500 lbs axle and leaf springs with 15" trailer tires. A standard 2" ball coupling, two standard safety chains, and 7-pin flat trailer plug allow for easy hookup and towing. The trailer tongue can be removed for long term deployment. Four leveling jacks mounted to the corners of the trailer allow operators to level the trailer and provide stabilization during deployment. All trailer lighting complies with DOT/FMVSS regulations.