Larson Electronics Pneumatic Light Mast - Extends to 30 Feet - Electric Air Compressor

The Larson Electronics PLM-30 Pneumatic Light Mast provides a safe and effective way for operators to quickly deploy lights, security cameras and other equipment to elevations up to eighteen feet. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS* Larson Electronicss’ telescoping pneumatic light tower mast is designed to allow operators to quickly and safely deploy lighting and other electrical equipment in locations where this equipment must be elevated to heights up to 30 feet for effective application. This light boom can be extended to 30 feet for maximum area coverage and collapsed to 8.25 feet for closer more intense illumination. The tower is constructed of high strength, heat treated aluminum tubing for strength and durability. This tower is comprised of five sections, and includes a locking top mounting plate for easy removal of lights or cameras. The mast is elevated using an included 250 watt 220 Volt AC 50/60hz, 1/3 horsepower air compressor. An air release valve located at the base of this pneumatic mast allows operators to lower the tower. All wiring in internal, meaning no loose wiring when collapsed. The PML-30 includes a six-wire internal wiring harness with 12 inches extending from both ends of the tower. These light masts are typically mounted to trailers or other stable surfaces via a 12 inch square, _ inch thick mounting base-plate which has been drilled to accept four mounting bolts (3/4 inch). A 24 inch wide and 1/4 inch thick mounting plate is attached to the upper section of the mast to allow operators to easily and securely attach their desired fixtures. This light tower weighs 320 lbs, and can easily support and lift 150+ lbs fixtures. When fully extended, this light tower can withstand winds up to 70 mph without guys. The entire tower assembly is shipped via common freight carrier and when shipped measures approximately 12 feet long, 4 feet wide, 3 feet tall and weighs 350 lbs. Larson Electronics can custom tailor these units to the customer’s requirements with longer sections and larger mounting plates. Suggested Applications: Lighting and security camera deployment. We can equip this mast with 1000W or 1500W Metal Halide lights or a wide variety of high powered LED lights with comparable power, including the LEDLB-200X2E, LEDLB-160X2E or LEDLB-80x2E. Specifications / Additional Information PLM-30 Pneumatic Light Mast Quick Summary Length: 8.25 feet - 30 feet 8.25-30 Ft Light Mast Weight: 320 lbs Aluminum Construction Capacity: 150 lbs Pneumatic Operation Materials: Heat Treated 6063B/T5 Aluminum 1/3 HP Electric Air Compressor Operation: Pneumatic - Electric Air Compressor Sections: (5) 6` sections Mounting: 1/2" thick, 12 inch Square, Four Hole Bracket Shipping: Common Freight Shipping Weight: 350 lbs Section Lengths: 88.5"L x 5.5"D Base section, 86.6"L x 4.65"D, 85.4"L x 3.85"D, 84.25"L x 3.23"D, 83.1"L x 2.6"D Top section Special Orders- Requirements Options: Length- Mounting-Fixtures Contact us for special requirements Phone: 1-214-616-6180 Toll Free: 888-325-4448 Fax: 1-903-498-3364 E-mail: [email protected] Scroll Down to Purchase-