Larson Electronics Pedestrian LED Crossing Sign - 24"x24" - Class I LED Beacon - Motion Detector - Solar Powered

Made in the USA The Larson Electronics SPLED-IND-PED-WS-24.24-MS Pedestrian LED Crossing Sign enhances pedestrian safety and is ideal for parking lots and sidewalks. The crosswalk sign measures 24"x24" and leverages a Class I rated LED strobe with an adjustable motion sensor for illuminative notifications, when movement is detected. This unit is a 100% remote systm powered by a solar panel. Color choices for the LED beacon include green, amber, red, white or blue. The SPLED-IND-PED-WS-24.24-MS offers illuminated safety for pedestrians. Reflective material on the yellow/black sign ensures visibility, when viewed from different angles. Measuring 24"x24", the unit features a Class I rated LED beacon located above the sign. The LED strobe light is activated when movement is detected by the adjustable motion sensor, which supports a minimum sensing range of 25`. The motion sensor can be pointed in different directions, allowing the sign to face traffic, while the sensor faces the direction of crosswalk traffic. The light will stay on for 15 seconds after motion is detected and the sensitivity of the sensor can be adjusted to meet each application. The powerful LED beacon is equipped with 30 flash patterns, including four simulated rotating patterns. This beacon has a black powder coated die cast base that contains a fully potted circuit board. A clear polycarbonate lens protects the LED assembly; and the housing is waterproof, shock resistant and built for reliable operations. The strobe light is equipped with auxiliary LEDs on top, helping to make this a Class I rated beacon. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Power/Wiring: This unit is 100% remote, powered by a solar panel. The 30 watt solar panel recharges the battery in 5 hours with direct sunlight. As with all solar powered equipment, charging time is affected by the amount of available ambient light. When ambient light levels drop below a certain level, such as on very cloudy days, the unit will not recharge. The solar panel is weatherproof and designed to catch the maximum amount of sunlight possible when properly mounted. The motion sensor will activate the light upon detecting movement within range of the panel and keep the light on for 15 seconds after detection. A sealed lead acid battery pack is contained within the solar panel, not the crosswalk sign. The mounting apparatus is designed to allow a variety of mounting options including flat surfaces such as a wall and square or round pole mounting. The crosswalk sign is connected to the panel by a 10 foot 16/2 SOOW cord that provides flexibility for positioning of the solar panel and sign into their respective optimum locations independently of each other. Applications: Sidewalks, parking garages, busy industrial facilities, delivery bays, high-activity locations and more. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information SPLED-IND-PED-WS-24.24-MS Pedestrian LED Crosswalk Sign Ratings/Features Unit Type: Pedestrian LED Crosswalk Sign SAEJ845, Class 1- Brightest Rating Dimensions: 24" x 24" (Sign Only) Motion Sensor Weight: 4 lbs (Strobe Light Only) Multi-Strobe Pattern Options Operation: 100% Remote Solar Power Waterproof Wattage: 14.4 25` Minimum Motion Sensing Range Lumens: 1,440 100% Remote Operation Luminous Efficiency: 100 Lumens per Watt LED Lamp Life Expectancy: 50,000+ Hours Lighting Configuration: Strobing Flash Special Orders- Requirements Ambient Temp: -45¡C to +55¡C Contact us for special requirements Materials: Polycarbonate Toll Free: 888-325-4448 Wiring: 10` of 16/2 SOOW Cord b/w Solar Panel and Top of Sign Fax: 1-903-498-3364 Sign Color: Yellow/ Black E-mail: [email protected] Scroll Down to Purchase