Larson Electronics Mobile Trailer w/ 30' Telescoping Mast - Fully Enclosed Trailer for Generators/Equipment - Fold Over

Made in the USA The WCDE-4G-WS mobile tower from Larson Electronics is a towable package with a completely enclosed trailer. Equipped with a 30` telescoping mast, operators can equip lighting, camera, and other equipment to the mast for elevated use. The WCDE-4G-WS mobile tower is a towable tower package equipped with a telescoping mast and fully enclosed generator housing mounted to a single axle trailer. This mobile package is ideal for emergency services, large scale event illumination, construction, mining, industrial operations and anywhere an extended operation capable mobile lighting solution is needed. Click Photo to Enlarge Click Photo to Enlarge Telescoping Boom: The telescoping boom consists of three sections extending up to 30 feet through the use of two manual self braking winches and allows for rotating the lights 360 degrees. One winch is mounted to the trailer tongue and acts to raise the tower into a vertical position while the other is mounted to the boom and is used to extend the tower to the desired height. The telescoping boom is constructed of galvanized steel to resist rusting and corrosion and is capable of withstanding 65 mph winds when extended to its full height and the stabilizing outriggers are deployed. The stabilizing outriggers are a three point design with one located under the trailer tongue and two on the rear sides of the unit. The two rear outriggers are adjustable and include 1,000 lbs swivel jacks for leveling and stabilizing the tower. Housing: All of the operating components are housed within a protective compartment constructed of 14 gauge steel. A single side door provide access to the interior while latches provide secure closing while the unit is in use. The entire unit can be loaded and unloaded onto trucks via forklift sleeves mounted to the outer section of the light mast. The entire unit is mounted onto a two wheel trailer with a 2,000 lbs leaf spring axle. A standard two inch ball coupling and two standard safety chains allow for easy hookup and towing. NOTE: This does NOT include the generator, controls, or fuel tank. Pictures of these items are for representation / application purposes only. These units can be fitted with factory genset, controls, receptacles, transformers, or other equipment per request prior to ordering. Please contact us with any requests you have for custom builds. Specifications / Additional Information WCDE-4G-WS Mobile Tower Protection Trailer Specs Three Point Outrigger System Materials: 14ga Sheet Steel Enclosure, 12ga Formed Steel Chassis Withstands 65Mph Winds at Full Extension Hitch: 2in ball / pintle combo Fully Enclosed Trailer Finish: Industrial Grade Paint Axle: (1) 2,000 lbs Suspension: 2,000 lbs Double Eye Leaf Springs Outriggers: (4) Adjustable Outriggers w/ 2,500 lbs Manual Leveling Jacks Lighting: DOT Approved tail, side, brake, and directional lights Wheels: (2) 13" 5x4.5 Steel Rims Tires: 155R13 Light Mast Specs: Mast Type: Manual Crank-Up Boom Height: Up to 25` Materials: Galvanized Steel Operation: Manual Hand Crank Winch Special Orders- Requirements Winch: 2500lb, Self-Braking Contact us for special requirements Stages: Five Toll Free: 888-325-4448 E-mail: [email protected] Down to Purchase