Larson Electronics Low Profile Hazardous Area Fluorescent Light - Lay-In Mount -Front Load Troffer - Class 1, Div. 2

Made in the USA The Larson Electronics HAL-LI-48-4L-T8 Hazardous Area Fluorescent Light Fixture is U.S./Canada ETL listed Class 1 Division 2 Groups A, B, C and D and ideal for use in paint spray booth, clean rooms and industrial hazardous locations where accumulated paint and finish residues may be encountered. This unit is of a lay-in mount, front loading troffer design offering a low profile for providing maximum illumination from limited mounting space. ***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** The HAL-LI-48-4L-T8 fixture is a 4 foot long, 4 lamp, Class 1 Division 2 Groups A, B, C and D hazardous area fluorescent light and a good choice for use in industrial clean room applications and paint spray booths. This front access troffer style fixture is T3C temperature rated, vapor proof and dust proof, and comes standard with F32/741 T-8 bulbs. The housing on this unit is constructed of powder coated 20 gauge steel, and is sealed and gasketed for safety. The Lamp housing contains a highly reflective insert to increase light output efficiency. The lamps are held in place by spring loaded sockets and protected by a 90¡ hinged glass door with a 3/16” tempered glass lens which is secured with three turn latches. This fixture is multi-voltage capable and is available in voltages of 120-277, or 347 & 480 VAC. Wiring is through 1/2 NPT wiring hubs located on the back side of the fixture. This fixture also provides added safety through the inclusion of an integral magnetic paint spray cutoff switch that shuts down paint spray systems when the fixture is opened. This fixture features a troffer lay-in mounting design housing that measures only 2 and 1/4 inches in thickness and 2 feet wide by four feet long, resulting in a very low profile fixture that is deal for flush mounting in ceilings that utilize standard sized ceiling tiles. Made in USA Quality Lamp Options 1. Each unit dialectically tested.2. Fixture arrives assembled and lamped to reduce installation time and cost. Lay in troffer style housing for low profile installtion.3. Fixture housing constructed of white powder coated 20 gauge steel.4. Relamping done via 3 turn latches, which enable the operator to unlatch the hinged door and access the lamps.5. Polished specular reflector for improved light output and light distribution.6. 3/4 inch, threaded NPT access holes for wiring. 7. 120-277 VAC standard and 347-480VAC optional.8. Magnetic paint spray system cutoff switch in door for added saftey. F32-T8/841 – 2800 lumens per bulb, 24,000 hours life, 4100 Kelvin color Specifications / Additional Information HAL-LI-48-4L-T8 Hazardous Area ETL Listed Listing: United States - Canada Class 1 Division 2, Groups A, B, C, D Dimensions: W-23 1/2" L-47 1/2 " D- 3 15/16 " Class 2 Division 2 Groups F,G Materials: Powder Coated 20 Gauge Steel Suitable for Locations with Paint Deposits Total Watts: 128 watts Weight: 44 lbs Voltage: 120-277, 347 & 480 Optional Total Lumens: STD-T8 Bulbs 11,200 Lamp Life Expectancy: STD-T8 Bulbs 30,000 Hours Efficiency: STD-T8 Bulbs 92 Lumens per Watt Operating Temp Range: T3C Rated 160¡C Beam Angle: N/A Special Orders- Requirements Color Temp: 4100K- T8 Bulbs Contact us for special requirements Mounting: Low Profile Lay-In Troffer Design Toll Free: 888-325-4448 Wiring Hub: 3/4 inch threaded NPT Fax: 1-903-498-3364 E-mail: [email protected] Scroll Down to Purchase-