Larson Electronics Low Profile Explosion Proof LED Light - 4ft, 4 Lamp - C1D2 - Paint Spray Booth Rated - NO LAMPS

Made in the USA The Larson Electronics HALD-48-4L-LED-NL Hazardous Area LED Light Fixture is designed to provide a thin fixture profile that allows the maximum use of available space. This LED fixture is U.S./Canada approved Class I Division 2, Groups A, B, C and D - Class II Division 2, Groups F and G and designed for paint spray booths and locations where flammable chemical/petrochemical vapors are present. This light fixture is designed to accept LED bulbs. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS LIGHTING SYSTEM* The HALD-48-4L-LED-NL Explosion Proof fixture is a 4 foot long, 4-lamp, Class I Division 2 hazardous area led light that can accept 4 LED bulbs and is ideal for use in paint spray booths and hazardous locations where space for lighting fixtures is limited. This fixture is T3C temperature rated, is designed to be equipped with LED bulbs, and features an integrated magnetic paint spray system cutoff switch that is activated when this fixture`s lamp door is opened. Installed lamps are protected by a steel framed, hinged, 3/16" thick glass door that provides direct front access to the four lamps. The lamp housing is only 2 and 1/4 inches thick, designed for recessed mounting, constructed of 20 Gauge steel and coated with a baked on white enamel finish. PLEASE NOTE: The HALD-48-4L-LED-NL light fixture is sold without lamps and is not equipped with a ballast. This fixture is multi-voltage capable and is approved for use paint spray booths. The HALD-48-4L-LED-NL provides operators in hazardous locations with a reliable and durable, low profile lighting solution that provides added safety through the inclusion of an integral paint spray cutoff switch that shuts down paint spray systems when the fixture is opened. We have eliminated the ballast normally associated with fluorescent fixtures which reduces overall weight and creates a slimmer unit profile. There is no ballast in this unit and is designed to be used with LED lamps, both of which result in extreme efficiency and greatly reduced maintenance costs. The solid state design of the LED lamps give this fixture superior resistance to damage from vibration, extremes in temperature, and a lamp service life over twice that of standard fluorescent bulbs. NOTE: The integral momentary cutoff switch included with this fixture is activated when the lamp door is opened. This switch is not intended to directly control light operation and requires the addition of a separate solid state relay which is then used to control actual system operation. The Cutoff Switch acts only as an activator for an external relay and is rated for 10 watts at a maximum of 300 VAC. Overloading the switch through improper connection will result in switch failure. It is recommenced that a certified electrician make any installations and reviews of relay connections intended to take advantage of this light`s cutoff switch. This fixture universal voltage, not multi-tap, and operates on any voltage from 120V to 277V AC 50/60hz without any modifications. We also make a 12/24V AC/DC version for low voltage applications for AC or DC power. Mounting: This fixture is designed for recessed mounting and requires a mounting hole to be made in booth panels capable of accommodating the fixture housing in order to provide the maximum amount of space in paint spray booth enclosures. Once mounted, this fixture`s glass door frame will extend 3/8" into the spray booth. Applications: Paint spray booths and enclosed spaces where flammable chemical/petrochemical vapors are present. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Made in USA Quality Superior LED Benefits 1. Each unit dialectically tested.2. Fixture is designed to accept LED lamps but does NOT come with lamps. 3. Fixture constructed of 20 gauge steel with a baked on white enamel finish.4. Relamping done via fixed hinge, drop open door.5. Reflectors coated with high gloss reflective enamel finish. 6. 1/2" NPT conduit hub for wiring. 7. Integrally mounted magnetic cutoff switch for connection to relay system allows automatic shutoff of paint system when fixture door is opened.8. Low profile fixture housing is only 2 1/4" thick, providing the maximum amount of room in space limited spray booth enclosures. 1. 50,000 hour lifespan.2. Can SAVE 50% or more on energy.3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.4. Reduces energy use and prolongs life-spans of peripheral cooling units (A/C, refrigeration)5. 100% recyclable.6. No toxins-lead, mercury.7. No UV light, infrared radiation or CO2 emissions.8. Qualifies buildings for LEED and other sustainable business certifications.9. Bright, even light maintains consistent color over time.10. Instant on/off - No flickering, delays or buzzing. 11. Very good color rendering.12. Vibration/impact resistant.13. Significantly cooler operation.14. Less frequent outages, higher output improves workplace safety. Specifications / Additional Information HALD-48-4L-LED-NL - Paint Spray Booth LED 4-Lamp Fixture Ratings/Approvals Listing: United States - Canada Class I Division 2, Groups A, B, C, D Dimensions: 50.875"L x 15.75"W x 2.25"D Class II Division 2 Groups F,G Weight: 40 Lbs T3C (160¡C) Voltage: Universal 120-277VAC 50/60 Hz or 11-25V AC/DC Listed for U.S. and Canada Max Wattage: 120W Total (30W per lamp) Total Lumens: - LED Lamp Life Expectancy: - Luminous Efficiency: - Color Temp: - Color Rendering Index: - Beam Angle: 150¡ Magnetic Switch: 10 watts at 300V AC (Max) Momentary Contact Switch Power Efficiency: 90% Power Factor: >0.95 Ambient Operating Temp Range: -30¡C to +85¡C Operating Temp Rating: T3C Rated Minimum Operating Temp: -30¡C Maximum Case Temp: +90¡C Housing Material: 20ga Steel Frame Special Orders- Requirements Lens Material: 3/16" Tempered Glass Contact us for special requirements Mounting: Recessed Panel Mounting Toll Free: 888-325-4448 Wiring Hub: 1/2" Threaded NPT Fax: 1-903-498-3364 E-mail: [email protected]