Larson Electronics LEDWP-400 - LED Wall Pack Light - 400W Metal Halide Equivalent - 12 LEDs - 30ft Cord High Output

The LEDWP-400-30C LED Wall Pack Light offers high light output from a compact form factor and is designed to provide a more durable and long lived alternative to halogen and metal halide units. This 40 watt LED light produces illumination comparable to a 400 watt metal halide unit without the high heat, fragile construction, or high energy costs of incandescent lighting. The LEDWP-400-30C LED wall pack light from Larson Electronics produces a long flood beam of light while drawing only 40 watts @.45 amps at 120 VAC. The light assembly consists of twelve LEDs paired with high purity specular optics to produce a light output comparable to that of a 400 watt metal halide. This LED wall pack is designed to withstand demanding conditions and is waterproof, vapor proof, and built to resist the damaging effects of an outdoor environment. Dark warehouse, illuminated by 100W incandescent bulb. Same warehouse being illuminated by the LEDWP-400. The LEDWP-400-30C consists of twelve LEDs housed within a waterproof aluminum housing that is powder coated for added durability and resistance to corrosion. The housing incorporates integral cooling fins for efficient heat dissipation and increased LED longevity. The LED lamp assembly is protected by a shatterproof polycarbonate lens which is secured to the housing with a waterproof seal. A 1/2" waterproof connector provides a secure and sealed power connection point and rounds out this unit`s weather resistant construction. Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting. The LEDWP-400-30C LED wall pack light from Larson Electronics produces a light beam that is longer and narrower than a standard Rab Floodzilla 250W Metal Halide (see comparison chart below). The beam will illuminate an area nearly twice the distance as a standard 250W metal halide flood light, but is 30% narrower than the metal halide flood. Mounting hardware for the LEDWP-400-30C consists of a stainless steel black coated bracket and stainless steel screws to provide secure mounting and resistance to rust and corrosion. The mounting assembly provides for 380/180 degrees of rotation to allow the user to position the unit as desired once mounted. This unit is designed to operate with voltages ranging from 110 VAC to 277 VAC, providing versatile power connection options and the ability to run the unit with commonly encountered 120-220 VAC voltages. The LEDWP-400 provides an efficient and highly durable alternative to standard metal halide and halogen wall pack lights that produces a longer reaching beam while using only a fraction the power. Click Photos to Enlarge 5-15 Straight Blade Plug15 Amp / 125V Rated L5-15 Twist Lock Plug15 Amp / 125V Rated L6-15 Twist Lock Plug15 Amp / 250V Rated UK BS1363 Straight Blade Plug13 Amp / 250V Rated / Internal Fuse Intl Schuko 2-Pin Plug16 Amp / 250V Rated / Grounded Flying Leads / Pigtail Wires Wiring and Plug: This LED flood light is equipped with 30 foot of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, standard 6-15 15 amp straight blade plug for 220-240V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug. With the LEDWP-400-30C there is no warm up period, the light can be cycled on and off without any reduction in lamp life, there is no glass or filament to shatter or break, and the solid state LED design provides 50,000 hours of operation. The LEDWP-400-30C is ideal for wall pack lighting, wall pack down lighting, upwards lighting, monuments, marinas, docks, warehouses, billboards, parking lots, and security systems just to name a few examples. Specifications / Additional Information LEDWP-400-30C Wall Pack Light LEDWP-400 Features Lamp Type: LED Waterproof/Vapor Proof Dimensions: Light: W-8 1/2" H-6 1/4" Top of light to bottom of base: H-10" Operates on Standard 110-277 VAC Weight: 4.5 Lbs Impact/Vibration Resistant Construction Watts: 40 50,000 Hour LED Life Lumens: 1462 ETL Approved for Wet Locations Voltage: 110~277 Volts AC Lighting Configuration: Flood Mounting: Adjustable Bracket Amps: .45 LED Light Color: Cool White - 7638K LED Life Expectancy: 50,000 hours Materials: Aluminum Housing, Polycarbonate Lens Special Orders- Requirements Color Rendering Index: 79 Contact us for special requirements Wiring: 30 foot cable with 5-15 straight plug Toll Free: 1-800-369-6671 Cord Cap: 5-15, 6-15, 6-15, L5-15, L6-15, BS1363, Schuko, or Pigtail Warranty: Yes - 3 Years E-mail:[email protected] 3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement. Scroll Down to Purchase-