Larson Electronics LED Light Bar - Low Profile 60 Watt Magnetic Mount

LED Light Bar contains 20 3-watt high powered LEDs providing 60 watts of LED light power that produce a beam 1100`L x 110`W. This LED light emitter bar light runs on any voltage ranging from 9 Volts to 32 Volts. This unit has a user controlled modulation This unit is designed to be moved easily from vehicle to vehicle or to different positions on the same vehicle. In addition, no installation is required. BUY AMERICAN COMPLIANT The LED light emitter is equipped with riser brackets that enable the operator to tilt the light up or down, to adjust the beam position. Heavy duty shock absorbers add protection to the light and stabilize the beam so it doesn`t jiggle even when on vibrating equipment. This LED light emitter bar light runs on any voltage ranging from 9 Volts to 32 Volts. The www.larsonelectronics.com LED emitter light bar uses a patent pending LED and reflector combination to provide a high powered, projected light source for vehicles, heavy equipment and security applications. Each LED is combined with its own reflector. The material composition and angle of the reflector, paired with the positioning and angle of the LED create a wide spot beam, which is unusual for a LED array. Each light bar is manufactured with an extruded aluminum housing, machined aluminum mounts and stainless steel hardware for strength, durability and weather resistance. Low profile LED Light Bars are perfect for mounting in tight spaces where traditional lights would not fit or where larger format lights would block mounted equipment. All of the www.larsonelectronics.com LED emitter lights work on voltages ranging from 9 volts to 32 volts, including 24 Volts, 18 volts, etc. All of our LED emitter bars are IP 67 rated, being both waterproof and dust proof. This LED light emitter bar is unique because of the patent pending technology that pairs a reflector with each LED. Typically LEDs are mounted against a surface and "glow". This glow is often effective at close range, but the light energy drops off rapidly. By pairing each LED with a reflector, the emitted light energy is concentrated and projected outward, so that the "drop off" in light energy does not occur until much greater distances. Like all reflector technology, the amount of light energy projected is directly related to the shape and material of the reflector, as well as the thickness and composition of the lens. Because this LED light bar clusters the LED/reflectors together, the light pattern is both wide and deep. This LED light bar emitter produces a wide spot pattern (or a modified spot pattern) which falls in between a narrow spot and a flood pattern. SPECIFICATIONS:Length: 12" Height: 2.75 inches (5 inches tall with magnetic bases)Depth: 3 inchesLEDs: 20LED Watts: 3 Watts: 60 Volts: Works on any voltage between 9 volts and 32 volts, including 12 and 24 voltsAmps: 5 (on 12 volts) 2.5 amps (on 24 volts)Lumens: 3600LED Light Color: 7000KHousing Color: available in black or white LUX Measurements: In FLOODAt The Lens: 199,800At 1 Meter: 4,450 Lens Temperature: 78 Degrees F LUX Measurements: In SPOTAt The Lens: 188,400At 1 Meter: 24,800 Lens Temperature: 76 Degrees F Ambient operating temperature range: -40 degrees C to 85 degrees C BENEFITS:Low amp drawInstant light output50,000 hour lifeSmall form factorEfficient heat dissipationMagnetic mounting bases adjust the beam of the lightAluminum housing Most Larson Electronics LEDLB and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. You can review the technical details here. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.3 year warranty replacement on this LED light (or LED bulbs for light fixtures with removable LED bulbs). After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement. CE Certified EN55015 EMIEN61547 EMSEN62471 Photobiological Safety