Larson Electronics LED Dome Light - 10-30VDC - IP67 - Dimmable - Dual Color

Buy American Compliant The LED-DL290 LED Flush Mount Down Light is designed as an extremely efficient and versatile lighting solution for boat walkways, cabin areas, navigation areas, docks and other areas where low voltage is available. This LED down light is available in dual color configuration and produces 90 lumens in pure white configuration with a slightly less than 3.4 watt at .290mA current draw and covers approximately 12 feet of area. This High Intensity, Flush Mount, Overhead LED Down Light is fully sealed and housed within an IP67 rated weatherproof fixture that features a very shallow profile for easy and unobtrusive mounting in tight and space limited areas. These lights feature a white only version or multi-color capability options including white and red or white and blue color modes. The most unique part of this unit is the rotating bezel. If the customer chooses the white and red color scheme, he or she can rotate the bezel in either direction to produce the opposite coloring. The rotating bezel also allows the operator to dim the color light to his or her desire. When rotating the bezel, simply hold the unit in place in the desired position until desired dim level is obtained. The unit is also available in the white and blue color scheme. If customer order white only, the unit will only dim but will not change colors. These LED down lights are ideal for use in areas where space is limited and low voltage the only power source available. This image shows a 53` container with no illumination This image shows the same trailer, this time illuminated with the LED-DL290 White This image shows the same trailer, this time illuminated with the LED-DL290 Red These units are fully sealed, weatherproof and measure only 4" in diameter and .75” in total thickness. These compact units are designed for flush mounting in either interior or exterior applications. IP67 compliant, these flush mounting down lights are mounted via four self tapping screws for a flush fit. These units mount via 4 through holes in the back of the light. To access the through holes, the user must seperate the white bezel from the window. To do this one must place a flat tipped screwdriver in the slot indicated on the rear of the product. Make sure the screwdriver is in contact with the white bezel wall in the slot. Gently pry the screwdriver towards the outside of the unit while holding the white bezel. This allows you to gain access and mount the unit to a flat surface. Once mounted, simply replace the bezel. Specifications / Additional Information LED-DL290 LED Down Light Certification-Features Lamp Type: LED For marine environments Dimensions: 4 " Diameter .75" Depth Flush mounting Watts: 3.4 Marine grade aluminum housing Voltage: 10-30 VDC Low .290mA amp draw Mounting: Flat Surface Flush Mount IP67 Compliant-waterproof Wiring: Coventional 2 Wire Single Ground Multi-Color Options Amps: .290mA on 12 volts (WHITE) Lumens: 90 LED Life Expectancy: 50,000 hours Materials: Aluminum Housing Special Orders- Requirements Contact us for special requirements Toll Free: 1-800-369-6671 E-mail:[email protected] 3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement. Scroll Down to Purchase- Select Multi-Color or White only Version Below