Larson Electronics High Output 150 Watt High Bay Dimmable LED Light Fixture - 21,000 Lumens - 0-10V Dimming

The Larson Electronics GAU-HB-160LED-XDIMM High Bay Dimmable LED Light Fixture provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older incandescent, metal halide and high pressure sodium lights.This LED light fixture provides 21,000 of high quality light while drawing only 150 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.This LED light fixture features 0-10V dimming capabilities via an external driver. This gives operators the ability to manually adjust the brightness of the LED lamp quickly and easily. The 0-10V dimming allows for adjustments to fit the brightness needs of any lighting situation. A 0-10V dimmable light works through the use of a DC control signal that ranges between zero and ten volts. The basic idea is that at 10 volts of input the light is at its brightest level with 0 volts being the lowest possible dimness setting. The smooth, continuous and flicker-free dimming of a 0-10V dimmable LED light is ideal for a wide range of different lighting applications. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.The LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twelve individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.LED Drivers: Even in LED fixtures, heat is the single largest factor in premature light failure and color shifting. As a result, many manufacturers reduce the output of their LEDs in order to reduce the amount of heat produced. Rather than lower light output or quality, Larson Electronics addresses this problem with the addition of electronic LED drivers. These internal drivers provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. This not only reduces the energy dissipation, effectively lowering the operating temperature of the fixture, but also prevents AC over-voltage and short circuit loading making this fixture virtually maintenance free. Because the electronic drivers allow the GAU-HB-160LED-XDIMM to run at a cooler internal temperature and regulates the electrical current, energy efficiency and LED service hours are maximized while at the same time reducing operating costs and downtime incurred from the frequent servicing intervals required with other hotter running lights.The LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. With the GAU-HB-160LED-XDIMM series of lamps from Larson Electronics, each LED fixture contains six individual LED boards configured in a series of banks. Each bank contains two LED on a single board with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.Click Photos to Enlarge 60¡ Beam Angle 125¡ Beam Angle Plug 140¡ Beam Angle Plug This unit produces 21,000 lumens with a color temperature of 5600K standard and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. We also offer a 3000K warm white and 4500K natural white color temperature options (longer lead times may apply for non-standard temperatures). This lamp uses Cree LED units that have been chosen for their high lumen per watt ratio and extreme longevity. These Cree LEDs generate a robust 86.67 lumens per watt effective lumen output and have a 80% lumen retention at 60,000 hours, giving them better efficiency and operational life than traditional light sources.Field Serviceability: This LED light fixture is field serviceable. All major internal components can be purchased from Larson Electronics and installed by a licensed electrician with basic tools. With most fixtures, the fixture must be returned to the manufacturer for repair work, which presents downtime and long turn around times for repair work. Larson Electronics addresses this issue with the GAU-HB-160LED-XDIMM series with field serviceability, allowing operators to perform service work without having to return the fixture to the manufacturer in the event of damage or failure.Energy Consumption ComparisonMetal HalideLEDWattage400 watts150 wattsAmp Draw @ 120V AC3.83 amps1.25 ampsAmp Draw @ 220V AC2.09 amps0.68 ampsAmp Draw @ 240V AC1.92 amps0.63 ampsAmp Draw @ 277V AC1.66 amps0.54 ampsLamp Life Expectancy20,000 hours50,000+ hoursOperation cost per year(12hs/day @ 12c/kWh)$241.78$78.84Each LED light fixture has the potential to save $150.00+ per year in electricity alone, not including maintenance costs, operational downtime, reduced productivity, HVAC loads, or carbon footprint. When retrofitting an entire facility with 100s of light fixtures, the return on investment of LED over metal halide becomes evident. Voltage: This light is universal voltage capable and can be operated with 100-277V AC, 50/60 Hz without modifications to the fixture. We also offer an additional 347-480V high voltage and 125-250V DC versions of this LED light fixture. Mounting: The GAU-HB-160LED-XDIMM comes standard with both pendant mount and adjustable surface mounting bracket. Ceiling and wall applications are mounted using the included adjustable swivel mount bracket found on the rear of the unit. Pendant applications are mounted from the ceiling and are suspended by rigid pipe via the 3/4" NPT hub on the back of the fixture. Wiring is fed through rigid pipe to the junction box and tied in to the fixture’s lead wires, completing the electrical connection. Additional mounting types are avaiable for this model.This LED light fixture is paint spray booth listed, IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics.Suggested Applications: The GAU-HB-160LED-XDIMM is ideal for a wide variety of applications.At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or message [email protected] for more information about our custom options tailored to meet your specific industry needs.High Quality FeaturesSuperior LED Benefits1. Low power consumption.2. Instant on/off operation.3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.4. Superior color rendering compared to HPS, LPS, MH.5. Retains 80% lumen output after 60,000 operating hours.6. Powder coated aluminum fixture body. 7. Pendant and Swivel Bracket mount included8. Low profile - Light weight9. 21,000 Lumen output from 150 watts10. External driver provides 0-10V dimming capability.1. 60,000 hour lifespan.2. Can SAVE 50% or more on energy.3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.4. Reduces energy use and prolongs life-spans of peripheral cooling units (A/C, refrigeration)5. 100% recyclable.6. No toxins-lead, mercury.7. No UV light, infrared radiation or CO2 emissions.8. Qualifies buildings for LED and other sustainable business certifications.9. Bright, even light maintains consistent color over time.10. Instant on/off – No flickering, delays or buzzing. 11. Very good color rendering.12. Vibration/impact resistant.13. Significantly cooler operation.14. Less frequent outages, higher output improves workplace safety.Specifications / Additional Information GAU-HB-160LED-XDIMM - High Bay Dimmable LED LightRatings/ApprovalsListing: United States - CanadaListed for United States and CanadaLamp Type: Cree LEDT5 Temperature RatingDimensions: 14"H x 16"W 5"DIEC 60529 TestedWeight: 32 lbsIP67 Rated WaterproofVoltage: 100-277 Volts AC, 50/60Hz Multiple Driver BanksTotal Watts: 150W80% Lumen Retention after 60,000 HoursTotal Lumens: 21,000 3.5kV Surge Protection (NTC Circuit)Luminous Efficacy: 140 Lm/W Recommended 15` to 40` Mounting HeightLamp Life: 60,000+ HoursExternal Driver Provides 0-10V DimmingColor Temp: 5600K, 5000K, 4500K, 4000K, 3500K, 3000K, 2700K, or 6500K Color Rendering Index: >75 CRIBeam Angle: 60¡, 125¡, or 140¡ Lighting Configuration: Flood PatternPower Efficiency: >95%Power Factor: 0.992Ambient Operating Temp Range: -50¡C to +65¡COperating Temp Rating: T5Housing Material: Copper Free Cast AluminumHousing Finish: Epoxy Powder Coated - GreyLens Material: Hardened Borosilicate GlassGasket Material: SiliconeMounting: 3/4” Pendant & Swivel Mount - Both Ship w/ FixtureWiring: 10` 16/3 SOOW w/ Flying LeadsWiring Hub: 3/4" NPTLED Driver SpecsInput Voltage: 100-277 Volts ACSpecial Orders- RequirementsInput Current: 1.8A MaxContact us for special requirementsOutput Voltage: 54V MaxToll Free: 1-800-369-6671Output Current: 2.1AIntl: 1-903-270-1187Warranty: Yes - 5 Years* - 10 Year / 100,000 Lumen Available**E-mail: [email protected] Scroll Down to Purchase-