Larson Electronics HID Spotlight - 50 Watt HID- Alum Housing - 6.75" OD - 4500 lumens - SPOT - 850nm IR Blackout Cover

High Intensity Discharge (HID) spotlight - 50 watt HID with internal ballast - SPOT BEAM PATTERN - 4000 foot long by 240 foot wide (at widest portion) - long distance spot beam Includes an 850 nanometer infrared blackout filter that snaps on to the front of the light, effectively blocking all visible light output. Night vision equipment is required to make use of the non-visible light energy emitted. The filter lens cover snaps on and off easily, but stays attached once snapped into place. Die cast aluminum housing - 6.75 inches in lens diameter, 7.1 inches tall with mounting bracket, 5.2 inches deep, weighs 4.2 pounds This HID spotlight uses arc lamp technology, which basically ignites gas, instead of a filament. As such, HID bulbs have much longer life than halogen bulbs, since there is no filament to break in high vibration environments. In addition, the gas is not subject to deterioration from heat, like halogen filaments, which also results in greater longevity. This HID-65-50 series spotlights will easily outperform a 500 watt halogen lamp which will consume 21 amps on a 24 volt circuit, while producing less heat and drawing less than 2 amps. These HID spotlights have an internally integrated ballast and take a simple power and ground wiring configuration. Thus, they can be used in place of any similar configured halogen light. There is no need for replacement of in-vehicle wiring systems, switches or other harness related equipment. A simple through hole mounting stud is comparable to other vehicle based mounted lights. Features: Precision metal reflectors focus light and retain shape over fixture life 50 watt HID Xenon D2 type Lamp produces 6800 kelvin color (bright white) 50 watt internal HID ballast - instant on, with 1-2 seconds to full power 13.3 amp start load on 12 Volts DC - 4.5 amps average draw after 60 seconds. 7 amps start load on 24 volts DC and 2.25 amps average draw after 60 seconds. Borosilicate hardened glass lens Dust and water tight (gaskets and seals) - IP67 rated Operates on any voltage 9 to 36 volts Vibration tolerance: 8.6G RMS Lumen Output - 4500 lumens Weight: 2.29 kg (4.5 pounds) Operating temperature: -40 degrees C to 105 degrees C Simple bulb replacement facilitated by removing lens ring only. IR Blackout Cover Specifications: Snaps on and off HID-65-50 light fixture. Blocks all visible light below 850 nm Polymer material is heat resistant, durable and protects spotlight lens