Larson Electronics HID 50 Watt Light - HID-6600-F 5 - 6.3 X 5.9 inches - 4500 lumens - 12/24VDC - FLOOD BEAM 340X340

This is our most popular High Intensity Discharge (HID) equipment light. The 8 rubber bushings imbedded in the base mounting plate ensure that the light receives nominal vibration from the equipment it is mounted to. Combined with the fact that HID bulbs have no filament to break and the bulb life is rated at 3500 life hours, this durable HID equipment light is ideal for all kinds of heavy equipment. Furthermore, the bushings act as a beam stabilizer, where operators can use a beam that experiences far less "jiggle" than conventionally mounted lights. Finally, the high impact nylon housing is durable, flexible and lightweight. Light fixture weight is often the cause of the light`s demise in high vibration applications. By reducing the weight, but maintaining the strength with nylon, the light itself does not become an impediment to its own longevity. HID work light systems - 50 watt HID FLOOD LIGHT - 340` X 340 ` beam pattern Materials: High Impact Nylon Housing Precision metal reflectors Borosilicate hardened glass lens Dust and water resistance (gaskets and seals) Dimensions: Lens - 6.3 inches wide by 5.9 inches tall Light fixture - 9 inches tall with mounting bracket - 8.5 inches deep Weight - 4.2 pounds Bulb/Ballast Specifications: 50 watt HID Xenon D2 type Lamp 50 watt internal HID ballast - instant on, 3 seconds to full visible power Lumen Output - 4500 lumens +/- 400 lumens HID color temperature 7000K (bright white) Voltage / Amperage Specifications On 12 Volts DC - 5.8 amps start load on 12 Volts DC - 4.2 amps average draw after 60 seconds On 24 volts DC - 2.9 amps start load on 24 Volts DC - 2.1 amps average draw after 60 seconds Same unit works on 12 Volts DC and 24 Volts DC - senses voltage and adapts Waterproof / Vibration Specifications: IP rating: IP 67 Vibration tolerance: 12G RMS (dual bushing mounting system contains 8 bushings to minimize beam bounce and damage to light) Mounting: This HID equipment light is mounted via a 3/8 inch stud. The bracket is adjustable and the operator simply drills a hole in the mounting surface and passes the bolt through that hole. The angle of the light is set and that bolt is tightened to secure the angle. Operating temperature: -40 degrees C to 105 degrees C CE Certified EN55015 EMIEN61547 EMSEN62471 Photobiological Safety Click here for dimensional drawings on the HID-66 Series Lights