Larson Electronics Hazardous Location Lighting - 150W High Pressure Sodium - C1D2 - Permanent Mount - 220-240V 50 Hz

Made in the USA The HAL-PRM-150W-HPS-220V.50HZ from Larson Electronics is a 150 watt High Pressure Sodium Hazardous Area Light Fixture that produces 34,000 lumens of light capable of illuminating an area 18,000 square feet in size. Weatherproof and U.L. listed for marine use, this high pressure sodium fixture is a versatile and ideal exterior lighting solution for both Class I Division 2 Groups A, B, C & D hazardous areas as well as non-hazardous locations. ***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS LIGHTING SYSTEM*** The versatile, multi-use HAL-PRM-150W-HPS-220V.50HZ high pressure sodium fixture from Larson Electronics is weatherproof and suitable for use in outdoor marine applications, making it an ideal lighting solution for industrial applications, boat docks, building exteriors and outdoor work areas. The lamp housing is weatherproof and constructed of die cast aluminum featuring a hinged, removable front-access door with two captive closure screws for easy servicing. The optical assembly includes a precision-formed aluminum reflector and a thermal shock, impact-resistant lens. This metal halide light fixture also features continuous silicon gasketing, corrosion resistant external hardware and a trunnion mounting bracket with stainless steel hardware for mounting. The aluminum reflector has a chemically bonded, lightweight, non-breakable ALGLAS¨ finish on both the inside and outside surfaces providing corrosion resistance, durability and ease of cleaning. The optical assembly contains a mogul base socket capable of handling the higher pulse ratings of newer HID systems. Bulb is not included with with this fixture. This hazardous area light is U.L. rated Class I Division 2, Groups A, B, C & D and suitable for wet locations with IP66 and NEMA 4X ratings. The integral pulse start ballast is protected within the weatherproof housing and operates on 220-240V 50 Hz voltage. This lamp is suitable for use in areas where flammable petrochemical vapors are sometimes present. The multi-purpose design of this fixture makes it a popular choice for industrial applications regardless of whether the locations are designated hazardous or not. This light is highly durable, produces high light output in a wide flood pattern and operates effectively at temperatures to -20 degrees F. Mounting is via an adjustable coated steel trunnion bracket that allows the fixture to be attached to walls or ceilings and provides secure adjustment and positioning. All hardware on this unit is corrosion resistant and the die-cast aluminum exterior has an electro-coat dark bronze paint finish. Wiring is through a convenient wiring box located on the bottom of the heavy duty housing which has a 3/4" NPT conduit entrance. LAMPS: Use only lamps specified on nameplate. Bulb not included with fixture. Observe lamp manufacturer`s recommendations and restrictions on lamp operation, particularly ballast type, burning position, etc. Click Here for Installation Instructions INSTALLATION INSTRUCTIONS This floodlight is provided with a trunnion bracket which can be mounted directly on flat surfaces or building fronts. The trunnion bracket has a clearance hole for a 3/4-inch bolt used for attachment for such mountings. The 1/2-inch holes on either side permit additional anchoring, where required. Tighten side trunnion bolts to 18 - 22 foot pounds. AIMING: Slightly loosen bolts "A" (two on trunnion) and tilt luminaire to desired position and retighten bolts. LAMPS: Use only lamps specified on nameplate. Bulb not included with fixture. Observe lamp manufacturer`s recommendations and restrictions on lamp operation, particularly ballast type, burning position, etc. LAMP TIGHTNESS: Mogul Base Lamp: The lamp should be securely inserted to the NEMA-EEI specified torque of 35 inch-pounds which is best achieved by very firmly tightening to insure application of sufficient torque. Tightening must be sufficient to fully depress and load the center contact of the socket. WIRING: Make all electrical connections in accordance with the National Electrical Code and any applicable local code requirements. Verify that supply voltage is correct by comparing it to nameplate. Three-conductor No. 14 cable (with 90¡C minimum insulation) is recommended for making electrical connections to the P-154. Wiring is accomplished through the wiring box provided on the fixture. The box is provided with a size 3/4" NPT threaded conduit opening. Wiring methods must comply with NFPA 70 (The National Electrical Code), Article 501 for Class I, Division 2 Hazardous (Classified) Locations. To get inside the unit, open the door, loosen the (2) screws holding the reflector and remove the reflector. Verify the correct supply voltage and lamp wattage. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Made in the USA Quality High Pressure Sodium Benefits 1. High Efficiency High Pressure Sodium lamp.2. 85 Lumens per Watt3. Rugged Die Cast Aluminum Housing. 4. Hinged Lens Door - Tempered Glass.5. Heavy Duty Door Gasket.6. Socket: Mogul Base Handles Higher Pulse Ratings of Newer HID Systems. 7. Low Maintenance.8. Adjustable Trunnion Bracket Mount- Corrosion Resistant.9. Electro-Coat Dark Bronze Paint Finish 10. Effective at temperatures to -20 Degrees F. 1. Long lamp life.2. High efficiency and low amp draw after initial startup.3. High durability and reliability. 4. High o utput and very good color rendering..5. Vibration and shock resistant.6. Low maintenance. Specifications / Additional Information HAL-PRM-150W-HPS-220V.50HZ High Pressure Sodium Light Fixture U.L Ratings Lamp Type: High Pressure Sodium Class I Division 2 Groups A,B,C,D Dimensions: 25"H x 17"W x 11"D Class I, Zone 2, Groups llC,llB,llA Watts: 150 Suitable for Wet Locations Lumens Per Watt: 85 Lm/W NEMA 4X Voltage: 220-240V 50 Hz IP66 Lighting Configuration: Flood Pattern Click Here to View Dimensional Schematic Beam Spread: 7 (146¡) x 6 (119¡) Color Temp: 2700K Mounting: Adjustable Trunnion Bracket Weight: 35 lbs Special Orders- Requirements U.L. Listing: Outdoor Marine Approved Contact us for special requirements Total Lumens: 34,000 Toll Free: 888-325-4448 Wiring: 3/4" NPT Threaded Conduit Entrance Warranty: YES - 5 Years* E-mail: [email protected] *5 year warranty replacement on this metal halide light (or metal halide bulbs for light fixtures with removable metal halide bulbs). After 30 days, the customer ships the failed metal halide light and/or metal halide bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement. Please click here to see our 5 Year Warranty pamphlet. Scroll Down to Purchase