Larson Electronics Handheld LED Light Emitter - 600' Spot Beam - 9-42V DC - 7, 3-Watt CREE LEDs - 25' Straight Cord

Buy American Compliant The HL-7LED-3C-25NP from Larson Electronics is a Handheld LED Control Light that offers high light output and a compact profile combined with a durable handle and versatile power options. This IP68 rated LED light bar is waterproof to 3 meters and produces 1596 lumens while drawing only 21 watts of power @1.7 amps from a 12 volt electrical system. This light can run on any voltage from 9 to 48V DC and provides a durable and compact lighting solution that is ideal for hunting, law enforcement, commercial, security and military applications. The HL-7LED-3C-25NP control light from Larson Electronics produces a 625` long by 50` wide light beam with 1596 lumens of bright light. Seven Edison Edixeon¨ Emitters containing CREE EZBright¨ three watt LEDs producing 228 lumens each are arranged in rows and paired with high purity 10 degree optics to produce a tightly focused spot beam with limited spread or light spillage. Unlike other LED units, this model is NOT a wide spot. We also offer, however, optional floodlight versions with 40 degree optics to produce a wider beam spread and more light over a larger area nearer the fixture, making flood versions ideal for use as work and area lights. The HL-7LED-3C-25NP Permanent Mount Control Light is IP68 rated and waterproof to 3 meters, sealed against intrusion by dust and dirt and ruggedly constructed to withstand demanding environments, conditions and applications. This particular unit comes standard with an impact resistant plastic handle and stainless steel tension hinge which holds the LED fixture in place. A 25` 16/2 SOOW straight cord with Deutch waterproof connector ending in flying leads is also included which makes it ideal for mobile applications. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Cree Specific: This lamp uses Cree LED units that have been chosen for their high lumen per watt ratio and extreme longevity. These Cree LEDs generate a robust 76 lumens per watt effective lumen output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life than traditional light sources. Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated Cree LEDs. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours. Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These light bars can operate on current ranging from 9 to 48VDC without any modifications necessary as a result. This multi-voltage capability makes these units ideal for mobile and standalone applications such as those found on commercial boats, heavy equipment and vehicles where power systems don`t always operate with 12 volts and external generators, transformers or inverters are impractical. HL-7LED-3C-25NP 40¡ Flood Beam(Opt) HL-7LED-3C-25NP 10¡ Spot Beam(Stnd) Durability: The HL-7LED-3C-25NP handheld LED light from Larson Electronics offers IP68 rated construction that is designed to withstand the rigors of demanding of environmental and operating conditions. These units can operate in temperatures of -40 degrees Celsius to 80 degrees Celsius, are waterproof to 3 meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The Edixeon¨ LEDs offer inherent LED resistance to shocks and vibrations contributing to these units 15.6Grms rating of vibration tolerance. Wiring: The HL-7LED-3C-25NP comes equipped with 25` of 16/2 SOOW straight cord with flying leads and a Deutsch waterproof disconnect. Operators can provide their own plug or hardwire this LED light for power. Mounting: This light is mounted to an impact resistant plastic handle for easy operation. The stainless steel hinge assembly on this unit allows the light angle to be adjusted for optimal light control. The adjusting hinges on this light are tensioned, allowing the user to simply position the light as desired without any need for locking the unit into place. Once positioned, the light will hold its position until the user again repositions it. Included with this light is a 25 foot 16/2 SOOW straight cord ending in flying leads, allowing operators to install their own plug or hardwire this LED light. Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information HL-7LED-3C-25NP Handheld LED Control Light HL-7LED-3C-25NP Features LEDs: 7 - Cree¨ 3 Watt LED Emitters Cree 3 Watt LED Emitters Dimensions: 4.49"-L 4.49"-H 3"-D LEDs Driven At 80% Watts: 21 -40¡C~ +80¡C Operating Temp Range Voltage: 9-48V DC RoHS Compliant Weight: 2.65 Lbs 70% Lumen Retention @65,000 hours Lighting Configuration: 10¡ Spot or 40¡ Flood Portable, Handheld Mounting: Portable-Handheld Impact Resistant Plastic Handle IP68 Rated Waterproof to 3 meters Wiring: 25` 16/2 SOOW Straight Cord w/ Flying Leads Amps: 1.7 (on 12 volts) Lumens: 1596 Special Orders- Requirements LED Light Color: 6000K Contact us for special requirements LED Life Expectancy: 50,000 hours Toll Free: 888-325-4448 Optics Efficiency: 90% Materials: Aluminum Housing, Polycarbonate Lens E-mail: [email protected] Housing Colors: Black or White CE Certified