Larson Electronics Explosion Proof UV/Visible Light Fluorescent Fixture - Paint Spray Booth, Rigs - Two Circuit Lamps

The Larson Electronics EPL-48-2L-T8-VISUVA Explosion Proof UV/Visible Light Fluorescent Fixture is NRTL Listed for United States and Canada, rated Class 1 Division 1 and Class 1 Division 2 for hazardous locations where flammable chemical/petrochemical vapors exist or have the potential to exist. Equipped with one T8 fluorescent lamp and one UVA fluorescent lamp, the NEMA-rated unit carries a T6 temperature rating and is approved for use in paint spray booths.The EPL-48-2L-T8-VISUVA is a 4 foot long, 2 lamp, Class 1 Division 1 and Class 2 Division 1 & 2 explosion proof fluorescent visible light/UV light combo, which is also approved for paint spray booth applications. Designed to operate on universal 120-277V AC, this T6 temperature rated fixture comes standard with one T8 fluorescent lamp and one UV-A lamp. The T8 fluorescent lamp produces visible white light at 2,950 lumens, with a 4100K color temperature rating. The UVA lamp produces UV light in the wavelength range of 400nm - 315nm. Both explosion proof lamps take on a flood beam configuration for comprehensive illumination.The lamps are protected by heat and impact resistant Pyrex tubes and the fixture is constructed of copper free aluminum alloy. The lamp reflectors are corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This fixture is multi-voltage capable and is available with a variety of lamp options. The EPL-48-2L-T8-VISUVA provides operators in hazardous locations with a reliable and affordable lighting solution that provides the best explosion proof protection available without sacrificing light quality or fixture durability.? T5HO T8 LEDWattage 108 watts 64 watts 48 wattsAmp Draw @ 120V AC 0.9 amps 0.54 amps 0.4 ampsAmp Draw @ 277V AC 0.39 amps 0.24 amps 0.18 ampsAmp Draw @ 12V DC 9 amps 5.34 amps 4 ampsAmp Draw @ 24V DC 4.5 amps 2.67 amps 2 ampsLamp Life Expectancy 20,000 hours 24,000 hours 50,000 hoursColor Temperature 5000K / 4100K 4100K 5300KOperation cost per year(8hs/day @ 11c/kWh) $34.69 $20.56 $15.42Click here to see the LED version of this fixtureWiring: Two separate wire connections are provided so operators can power on just the white lamp or just the UV lamp. This allows operators to change from an inspection or curing application (UV) to standard inspection or viewing (white light).Mounting Options: Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown enlarged below. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit). Additional mounting configurations can be customized to meet the requirements on the application. Please contact us for special mounting configurations.Surface Mount (Standard)Click Photo to EnlargeClick Photo to EnlargeClick Photo to EnlargeAdjustable Surface Mount Brackets: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg.Pendant Mount (Optional)Click Photo to Enlarge3 Conduit PositionsClick Photo to EnlargeSuspension Mounting: Pendant mount fixtures hang from the ceiling and are suspended by rigid pipe. Each fixture features a 1/2” NPT junction box on one end, and a 1/2” NPT adjustable L-bracket on the other end of the fixture. Operators bring rigid pipe down to the threaded mounting hubs. Wiring is fed down through the rigid pipe to the junction box and tied in to the fixture’s lead wires, completing the electrical connection. The adjustable L-shape mounting bracket provides support for the opposite end of the fixture.Applications: Chemical processing facilities, food processing plants, oil refineries, agricultural sites, grain storage facilities, metal processing and more.At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information EPL-48-2L-T8-VISUVA Explosion Proof UVA Lamp/Visible Light Ratings/ApprovalsLamp Technology: Fluorescent (Visible Light/UV) Class I, Division 1 Groups C and DDimensions: W-11.25" x L-52" x H-8.5" Class I, Division 2 Group A,B,C,DWeight: 65 lbs Class II, Division 1 & 2 Groups E,F,GLamp Quantity: 2 NRTL Certified to UL 595 Marine Type (Saltwater)Voltage: Universal 120-277V AC, 50/60 Hz NRTL Certified to UL 844Total Watts: - NRTL Certified to UL 1598 Marine TypeSingle-lamp Watts: 36W (Visible Light) Listed for Paint Spray BoothsTotal Lumens: - ABS CertifiedSingle-lamp Lumens: 2,950 lms (Visible Light) California Title 24 CompliantLuminous Efficiency: 92.19 lm/w (Visible Light) IP67 Rated - WaterproofLamp Life: 24,000+ Hours T6 Temperature RatingUV Type: UVA - 400nm-315nm NEMA 4XColor Temp: 4100K (Visible Light) Approved for Confined SpacesLamp Type: T8 (Visible Light), F17-T8 UV (UVA Lamp) Lamp Base: - Replacement Lamp: - Beam Angle: 150¡ Lighting Configuration: Flood Pattern Power Efficiency: - Power Factor: - Amps: - Ambient Operating Temp Range: -20¡C to +70¡C Temp Rating: T6 Special Orders- RequirementsHousing Material: Copper Free Cast Aluminum End Caps, Aluminum Reflectors Contact us for special requirementsLens Material: Hardened Borosilicate Glass Tubes Toll Free: 888-325-4448Gasket Material: Buna Rubber O-Rings Intl: 1-214-616-6180Mounting: Surface Standard - Pendant Optional Fax: 1-903-498-3364Wiring Hub: 1/2" NPT E-mail: [email protected]