Larson Electronics Explosion Proof Tool Tap Reel - 25' 8/3 Cable Reel w/ 20A Explosion Proof Outlet - C1D1 Rated

The EPLRT-25-8.3-1X20A-HR Explosion Proof Cord Reel w/ Tool Tap provides 20 amps of continual service, giving operators in hazardous locations the ability to easily extend the working reach of their tools and lighting equipment. Equipped with 25` of 8/3 SOOW cord terminated in an explosion proof cord cap and a 20-amp explosion proof outlet, this cord reel with tool tap is ideal for petroleum facilities, waste water treatment plants, grain storage and handling silos, paint booths, underground mines, chemical plants, and much more. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS AREA CORD REEL* The EPLRT-25-8.3-1X20A-HR is designed to extend electrical connections in flammable environments. Offered in 125V or 250V, the explosion proof cord reel includes 25` of 8/3 SOOW cord with an explosion proof cord cap (5-20P or 6-20P, depending on selected voltage) and a 20-amp explosion proof outlet. For proper protection and to maintain HAZLOC approval, a matching twist lock plug should be used with this unit`s power receptacle. This unit is of a modular design and is suitable for indoor or outdoor applications. These reels are built with modular components, coupled with a spark proof ratchet and hazardous location slip ring housing. The cord feeds onto the steel reel assembly through a 4 roller adjustable cable guide with a ball stop. This reel includes an integral spring actuated ratcheting mechanism for positive cord management housed within the explosion proof threaded slip ring enclosure. This cord reel is assembled to UL 508 table 36.1 / NEC Standards and conforms to NEMA 9 and NEMA 4 (IP56) standards as well. Click Photos to Enlarge These explosion proof extension cords are preconfigured in 125V (left) or 250V (right). Each unit is equipped with a 20 amp explosion proof cord cap and rated for 20 amps of continual service. The outlets are a twistlock design. The deep recessed contacts in the receptacle housing prevents ordinary and wet location plugs from activating the explosion proof outlets. 125V 5-20P Explosion Proof Straight Blade Plug 250V 6-20P Explosion Proof Straight Blade Plug 125V 5-20 Explosion Proof Outlet Outlet accepts 20A Explosion Proof Plugs Outlet accepts 6-20P Explosion Proof Plugs This 20-amp rated tool tap is ideal for operators seeking a high quality, wet area rated power receptacle suitable for use in industrial and manufacturing applications. This unit`s power receptacle is constructed of copper free aluminum and the housing is malleable iron. The unit is factory sealed and any arcing is safely contained within the interior of the receptacle. The receptacle is configured for use with 125V (5-20R) or 250V (6-20R) explosion proof cord caps. The receptacle contacts are deep recessed to avoid accidental contact and will not be energized by non explosion proof plugs to preserve explosion proof protection in hazardous environments. Ordinary location plugs will NOT activate this explosion proof receptacle. The iron housing is finished in a triple-coat zinc electroplate, chromate and epoxy powder coat while the receptacle is finished with an epoxy powder coat. This unit is designed to withstand wet and corrosive conditions such as those found in docks and shipyards and comes with a spring loaded receptacle door to prevent ingress of water and contaminants when the unit is not in use. An EYM seal off completes the Class 1 Division 1 rating on this explosion proof tool tap. Applications: Petroleum refineries, chemical and petrochemical plants, paint spray booths, food manufacturing buildings, agricultural sites, grain storage centers and more. This explosion proof tool tap is ideal for use with drop lights and tools in locations where connection to fixed receptacles is unavailable or impractical, and safely extends the operational range without creating the hazards associated with excessive cord lengths strewn about the workplace. Larson Electronics offers a wide variety of lighting solutions to accommodate this reel. For more information on these lights, please contact us at 888-325-4448. Specifications / Additional Information EPLRT-25-8.3-1X20A-HR Explosion Proof Cord Reel w/ Tool Tap Ratings Unit Type: Explosion Proof Extension Cord w/ Reel Class I, Division 1 Rated Dimensions: - NEMA 9 and NEMA 4 (IP56) Voltage: 125V or 250V Amp Rating: 20 Amps Continuous Service Special Orders- Requirements Materials: Copper-free Aluminum, Iron Contact us for special requirements Finish: Triple-coat Zinc Electroplate, Chromate and Epoxy Powder Coat Phone: 1-214-616-6180 Mount: Cord Reel Toll Free: 888-325-4448 Wiring: 25` 8/3 SOOW Cord w/ 5-20P or 6-20P Cord Cap Fax: 1-903-498-3364 Outlet: (1) 20A EXP E-mail: [email protected] Down to Purchase-