Larson Electronics Explosion Proof Portacool Portable Evaporative Cooler - Powder Coated - 30" OD - 8723 CFM - 34 Gallon EPF-AC-30

Made in the USA

The EPF-AC-30 Class I Division 1 Portable Evaporative Cooling System is rated for use in hazardous location work environments. This explosion proof powder coated air chiller combines a non-sparking fan and dry mist technology to cool Class I Division 1 work areas that do not have access to traditional air conditioning. This portable cooling is equipped with a 34 gallon tank and a water filter to cool the work environment for up to 8 hours.

*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS PRODUCT*

This Larson Electronics evaporative cooling unit is rated Class I Division 1 & 2, Group D and Class II Divisions 1 & 2, Groups E, F & G explosion proof environments. Using dry mist technology, this air chiller ensures that your work environment stays dry while lowering the ambient temperature. At 36" wide by 39" deep by 66" tall, this evaporative cooling unit can reach an evaporation zone of 5`-10`. With a 30" inch fan and eight spray nozzles, this unit is applicable to work areas with smaller access ways. This portable cooling system will automatically shut off once the water reservoir is empty, so operators don`t need to worry about burning out the pumps. The EPF-AC-30 has an ambient temperature rating of 10¡ to 65¡C.

Click Photo to Enlarge

With a fan unit running at 8723 RPM, this portable misting unit can chill down any industrial or commercial space in need of a cool down. Since one tank can easily last an entire work shift, there is no need for messy hose connections running throughout the work space. It is designed to be self-maintaining, therefore operators will not need to interrupt their work to replace pads or clean the nozzles.

This unit comes with a 30" spark proof aluminum blade and enclosed wire and motors. The fan blades are spark resistant and the unit is easily transported to various job sites. This cooler is easily transferred with 6" pneumatic wheels and connects via a 20` cord terminating in an explosion proof plug. This unit operates on 120 V or 220 V AC and has an amp draw of 6.62 A on a 120 V AC system.

Click Photos to Enlarge
5-15 Straight Blade Plug	5-20 Straight Blade Plug	6-20 Straight Blade Plug

Wiring & Plug: This explosion proof air mister is equipped with 20 feet of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an explosion proof cord cap for easy connection to explosion proof outlets. Plug options include a 5-15 15 amp straight blade plug for use with 120V explosion proof outlets, a 5-20 20 amp straight blade plug for use with 120V explosion proof outlets, or a 6-20 20 amp straight blade plug for use with 220-240V explosion proof outlets. **PLEASE NOTE** voltage ratings on plugs and outlets are MAXIMUM voltage. For low voltage applications, proper voltage must be applied to the outlet or damage to the light fixture will occur.

The EPF-AC-30 hazardous location evaporative cooling unit is easy to move around with its quick connect crane pick-eye and its powder coated steel frame ensures minimal rusting and maximum longevity as well as a very easy to clean surface. Applications include Class I Division 2 areas, including oil rig floors, construction sites, and tank cleaning applications.